jtkendall Posted January 1, 2017 Report Share Posted January 1, 2017 Anyone here used the Ryobi biscuit joiner? How did it do? It's $70-80 less than the price of the Makita and Dewalt corded versions which makes it appealing especially when I won't necessarily be using biscuits on a daily basis. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 1, 2017 Report Share Posted January 1, 2017 I've always looked at it and doesn't feel overly cheap but I've never used one, personally for something like that I'd drop some more coin Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
jtkendall Posted January 1, 2017 Author Report Share Posted January 1, 2017 1 hour ago, JimboS1ice said: I've always looked at it and doesn't feel overly cheap but I've never used one, personally for something like that I'd drop some more coin Sent from my iPhone using Tapatalk Yeah, I'm leaning towards the 18v Makita after thinking about it more. It's one less cord to worry about and I can use it anywhere in or outside the shop without having to move things around to plug it in. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 1, 2017 Report Share Posted January 1, 2017 I've heard a lot of good about that oneSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Logan Posted January 1, 2017 Report Share Posted January 1, 2017 I've only used the porter cable one and that one works great Quote Link to comment Share on other sites More sharing options...
Framer joe Posted January 3, 2017 Report Share Posted January 3, 2017 Ryobi is a good brand......I have a lot of their cordless tools ...now for a joiner ...in pine ..good...in azek good...in ipe (Brazilian hard wood ) no...oak ok if not too many joints...poplar is pushing it.....I have an old porta cable beast metal one...I use for all hard woods...Evan my old portable cable metal "sawzall" I would put up against any recipe saw out there today ... Quote Link to comment Share on other sites More sharing options...
jtkendall Posted January 3, 2017 Author Report Share Posted January 3, 2017 1 hour ago, Framer joe said: Ryobi is a good brand......I have a lot of their cordless tools ...now for a joiner ...in pine ..good...in azek good...in ipe (Brazilian hard wood ) no...oak ok if not too many joints...poplar is pushing it.....I have an old porta cable beast metal one...I use for all hard woods...Evan my old portable cable metal "sawzall" I would put up against any recipe saw out there today ... That's good to know, I don't see myself using it for anything that would be real hard or have a lot of joints. I would most likely just be for things like picture frames to reinforce miters or aligning small panels. If I get into more frequent door or table making where I need to join large panels I'd probably invest in a Domino or make my own mortis and tenons. 1 Quote Link to comment Share on other sites More sharing options...
DaveJr. Posted January 3, 2017 Report Share Posted January 3, 2017 7 minutes ago, jtkendall said: That's good to know, I don't see myself using it for anything that would be real hard or have a lot of joints. I would most likely just be for things like picture frames to reinforce miters or aligning small panels. If I get into more frequent door or table making where I need to join large panels I'd probably invest in a Domino or make my own mortis and tenons. For picture frames I would use splines and for small panels, I wouldn't even use biscuits. I just put glue on the jointed surface and clamp it together making sure to put f clamps on the joint, like so: 2 Quote Link to comment Share on other sites More sharing options...
jtkendall Posted January 3, 2017 Author Report Share Posted January 3, 2017 25 minutes ago, DaveJr. said: For picture frames I would use splines and for small panels, I wouldn't even use biscuits. I just put glue on the jointed surface and clamp it together making sure to put f clamps on the joint, like so: I was thinking with panels it would make it easier to keep them aligned so that glue ups would be easier. As for splines, I don't have a table saw and it seems like all of the instructions I find call for a table saw or using a biscuit joiner as a replacement. Quote Link to comment Share on other sites More sharing options...
Hugh Jass Posted January 3, 2017 Report Share Posted January 3, 2017 35 minutes ago, DaveJr. said: For picture frames I would use splines and for small panels, I wouldn't even use biscuits. I just put glue on the jointed surface and clamp it together making sure to put f clamps on the joint, like so: ...needs more clamps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.