farwest1889 Posted June 19, 2017 Report Share Posted June 19, 2017 I put a last second bid on a dremel on ebay without going to options and choosing USA only seller like I usually do when I buy powertools on ebay. It looks like its got two round plug ins instead of flat, can I take off plugin and put a USA plugin on it? Seller is from china. I asked if it had a USA plugin on it and seller said it did but just in case would I be able to install a USA cord on it? Sent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
Atlas2000 Posted June 19, 2017 Report Share Posted June 19, 2017 Most of Europe, Asia, Australia, Africa, etc. uses 230 volt 50 Hz with the two pin plug. So if that's what it was designed for, you won't be able to just put a US 120 volt plug on. Hopefully the seller was on the level and it is designed for US specs.. Quote Link to comment Share on other sites More sharing options...
BMack37 Posted June 19, 2017 Report Share Posted June 19, 2017 Like Atlas said, you need to check the power rating. Some products you can switch the power rating but generally, nowadays, you can't. You can buy a step-up transformer for pretty cheap. https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=step+up+transformer Again, you will need to check the power draw and get something rated appropriately. Quote Link to comment Share on other sites More sharing options...
Jronman Posted June 24, 2017 Report Share Posted June 24, 2017 I'll tell a little story. The other day we decide to try out an ac unit at our jobsite. It is a 220v unit. We asked our electrician if we could change out the plug to work with a standard 110v outlet. He said its more involved than simply switching out a plug. He said you would have to open up the motor and stuff to convert to 110v. I would guess it would be a similar situation when converting 230v electronics to 110v. If you have access to a 220v outlet that may work. Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted June 25, 2017 Report Share Posted June 25, 2017 On 6/23/2017 at 8:42 PM, Jronman said: I'll tell a little story. The other day we decide to try out an ac unit at our jobsite. It is a 220v unit. We asked our electrician if we could change out the plug to work with a standard 110v outlet. He said its more involved than simply switching out a plug. He said you would have to open up the motor and stuff to convert to 110v. I would guess it would be a similar situation when converting 230v electronics to 110v. If you have access to a 220v outlet that may work. You could have changed out the receptacle then put a 240 double breaker in the panel, relocate the neutral wire from the neutral bar to the breaker so you would have two hots to the receptacle... At least that's what I would do if I desperately wanted a/c quick Quote Link to comment Share on other sites More sharing options...
DR99 Posted June 27, 2017 Report Share Posted June 27, 2017 Some UK stuff runs on 110 because they run that voltage on job sites. Quote Link to comment Share on other sites More sharing options...
rbacon705 Posted July 1, 2017 Report Share Posted July 1, 2017 As long as it is 110V it should work fine. I have changed countless plugs from Uk to Au and they work fine. Quote Link to comment Share on other sites More sharing options...
aessu Posted August 27, 2017 Report Share Posted August 27, 2017 It should work fine, if its built for the correct voltage. I recently got a Makita DC18RD twin charger for really cheap from UK. Took me minute to change plug to EU standard one, work just like its supposed to. Quote Link to comment Share on other sites More sharing options...
Altan Posted April 15, 2022 Report Share Posted April 15, 2022 On 8/27/2017 at 7:59 AM, aessu said: It should work fine, if its built for the correct voltage. I recently got a Makita DC18RD twin charger for really cheap from UK. Took me minute to change plug to EU standard one, work just like its supposed to. I would change my EU socket to UK socket instead of changing the UK plug to EU plug :))) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.