Jump to content

reddawg60

Members
  • Content Count

    56
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by reddawg60

  1. Yea obviously I agree but your pissin in the wind... Some ppl think Dewalt invented the hammer..... Sent from my SAMSUNG-SM-T377A using Tapatalk
  2. Yea the newer 18 gauge does indeed come with 3 I believe different tips. Sent from my SAMSUNG-SM-T377A using Tapatalk
  3. Hey Don, where did you purchase the foam for the packouts? I've seen some here and there haven't really looked into to much but that's probably what I should do with mine also. Sent from my SAMSUNG-SM-T377A using Tapatalk
  4. No complaints here, I can't really compare it to the gen 1 as I didn't have that one. But have had mine for a couple of months and have used it to trim out a few houses so far. No jams or misfires whatsoever. Based on my experience so far an easy purchase should I need another one!! Sent from my SAMSUNG-SM-T377A using Tapatalk
  5. reddawg60

    dw 7000

    Oh man, that sucks!! I'm sorry to hear that stuff happen to anyone. I hope you can get it fixed and with some talking you can get Dewalt to cover it for you!! Sent from my SAMSUNG-SM-T377A using Tapatalk
  6. I had a couple of the old style Dewalts and loved them, unfortunately they both got ripped off during a lunch break a few years ago. I bought the newer Dewalt to replace it but had problems with it sinking the nails so I exchanged it and tried another one but that one was about the same. No terrible by any means but was used to my older ones which very very seldom didn't sink a nail. So I returned that one and went with my old senco 15 gauge air trim gun for awhile, but picked up a Milwaukee 15 gauge and had a little better luck with it, but it's still not as good as my old Dewalts but seems a bit better than the newer Dewalts I tried, so that's what I've been using since. I don't think you can really go to wrong with either one tho. Good luck in your choice tho. Sent from my SAMSUNG-SM-T377A using Tapatalk
  7. Dude just stop... Your making yourself look foolish!! For gods sake... Do some research into other tools once.. There's all sorts or features that are copied from all different brands... It's usually a good thing... If it works use it. Seriously how old are you? Sent from my SAMSUNG-SM-G930A using Tapatalk
  8. Lmao!!! Good god... I swear some of these posters are 10 years old!!! Dewalt came out with this first.... Smh... Who gives a RATS ASS who came out with what first??? I don't get it... We all benefit from it... Buy whatever the hell tool you want... For the life of me I never understood the big deal on who did what or I bought this or that... Do you really think I give a shit... Buy what you like best and can afford and gets the job done for you... I'm sorry... I can't help but think about the ppl that argue this shit are the same pin heads that drive home with their hard hats on!!!! Smfh!! Sent from my SAMSUNG-SM-G930A using Tapatalk
  9. People do all sorts of dumb things or should I say things that don't make alot of common sense, but the majority by far that use these impacts for a living won't put a 12ah battery on an impact. It's a moot point as far as I'm concerned. Sent from my SAMSUNG-SM-G930A using Tapatalk
  10. Hmmm wonder why the Milwaukees held up then... Smh. These were storage type buildings, lighter weight metal... I'm plenty aware of which tools to use when, but hey thanks for your all knowing wisdom.. Dime a dozen!! vcg guys... Na, I watch many different reviews on a tool (s) I'm may be interested in. Sent from my SAMSUNG-SM-T377A using Tapatalk
  11. Ohhh god please NO!!!! forget the governments getting involved... Please no!!! Sent from my SAMSUNG-SM-T377A using Tapatalk
  12. Why would I or anyone use a 12.0 on a drill or impact?... Not a chance, use the correct battery on the proper tool for the proper application. Sent from my SAMSUNG-SM-T377A using Tapatalk
  13. reddawg60

    Framing gun

    I hope you're right about that!!! Sent from my SAMSUNG-SM-T377A using Tapatalk
  14. I also like how much faster and easier it is to raise and lower the blade than the dewalt table saw I have. Yea the stand certainly isn't anything special but easy enough to move around even with the table saw attached to it. It gets the job done tho. Sent from my SAMSUNG-SM-T377A using Tapatalk
  15. Ahh Don... Santa pulled through for ya I see!!! [emoji16] I'm pretty sure you're gonna like it. Sent from my SAMSUNG-SM-T377A using Tapatalk
  16. Don't really understand buying the next gen tool while the one your using works fine. I ran mostly Dewalt for a good number of years till I ended up burning like 5 cordless drills up all in the same month, I slowly switched to Milwaukee and haven't had many problems at all. (Carpentry and trim work) I too agree with what others have said, if you do decide to switch just do it gradually as other tools fail and as the need arises. The few Makita tools I have and had were damn good tools too. Again, just because a next gen comes out doesn't mean you need it. Sent from my SAMSUNG-SM-T377A using Tapatalk
  17. Question is, why would you change brands if you never had problems with the dewalts? Sent from my SAMSUNG-SM-T377A using Tapatalk
  18. Naaa... Not as clear cut as you stated... That's been your experience, doesn't mean it's everybody's. I had a boat load of dewalt tools, but burned 5 dewalt cordless impacts up on one job of erecting metal buildings. There were roughly a year to a year and a half old. 5 on one job.. Now I have fewer dewalt tools but since have had better luck with Milwaukee and that's been my main brand now. No tool manufacturer is perfect no doubt, but not every one has the same luck (if that's what you wanna call it) either. Time is money and dewalt began to cost me time and money, made the switch and for the most part glad I did. While I agree about the comment about the MX line not being necessary for framing or remodeling (for the most part) I'll certainly be picking up the power supply at some point in the future. Also glad to see progress in all cordless tools whether it be Dewalt, Milwaukee or whoever! Sent from my SAMSUNG-SM-T377A using Tapatalk
  19. Just a heads up... Apparently International tool has the cordless table saw with the 12ah battery and a free hat for 529.00. Sent from my SAMSUNG-SM-T377A using Tapatalk
  20. What the hell is the difference... Smh.. It's all an improvement and tools to make the job easier. Never understand it.. Sent from my SAMSUNG-SM-T377A using Tapatalk
  21. You can get the 2732 for I think the price was 249.00 over at Ohio tool and it comes with a 8ah battery. Sent from my SAMSUNG-SM-T377A using Tapatalk
  22. Woooo... Best ever made.. Ohhh way over simplified, the old reliable Rockwell 315!! [emoji16][emoji16] still have one and use it, almost 50 years old and still going. Also have an old Rockwell 10" circular saw in pristine condition and don't dare use it!! Sent from my SAMSUNG-SM-T377A using Tapatalk
  23. Thanks Don [emoji106] I'm sure I'll be picking this one up as most of my cordless tools are Milwaukee and Dewalt. Appreciate the input and any other input is appreciated. Hopefully I find a decent sale on it with the holiday season coming up. Sent from my SAMSUNG-SM-T377A using Tapatalk
  24. Yea not heard very many good reviews of the gen 1 18g nailer either. So Don would you say it's a no brainer on the gen 2 nailer then? Sent from my SAMSUNG-SM-T377A using Tapatalk
  25. Oh I like it alot, no issues whatsoever for me. I mainly use it for interior trim work and hardwood and laminate flooring also. Rip 2x material on it here n there also. Sent from my SAMSUNG-SM-T377A using Tapatalk
×
×
  • Create New...