Jump to content

M18 Fuel 18 gauge brad nailer


Recommended Posts

 Do any of you guys use this brad nailer?

 I was thinking about purchasing one .

  I have a paslode 18 gauge cordless nailer that was a Christmas gift 3 years ago.

 I love the tool when it works ,  between the maintenance of cleaning the tool and the drive blade breaking three times in three years ,

i am thinking about retiring the tool.

I have a paslode 15 gauge angled finish nailer that is over 10 years old that has been a great tool.

 Also I have a 25-year-old porter cable pneumatic 18 gauge brad nailer that has never needed servicing and has never let me down.

 

 I use the 18 gauge,  mainly to install baseboards and  quarter round/ shoe molding.

 I like the convenience of not dragging out an air compressor and hose, especially when we’re doing a small bathroom on the second floor of a home .

 I have read some reviews on the Milwaukee and would like to hear your thoughts on it.

 

 

Link to post
Share on other sites

I'm a Milwaukee fan boy and have lots of M18 and M12 tools, the 18 gauge nailer was the first and only Milwaukee tool I thought was absolute garbage. It jammed constantly, it would make it maybe 10 1" nails before jamming, as the nails got longer it would jam more frequently.

 

I ended up sticking with pneumatic.

Link to post
Share on other sites

I've actually had decent luck with mine - no jams to date and I've driven maybe a thousand brads.  I do have to say that it is quite finicky when it comes to sinking nails fully. If you don't get the angle just right and have the face fully flush against the work piece, you've got a decent chance of a nail sitting proud of the surface when it fires.  This is more of a problem when you're in a tight spot and maybe can't get the gun all the way in or are at an angle.

 

The Ryobi is much more forgiving in this respect and even though it has a ramp up, is heavier and can't fire as fast, I think I prefer it.

Link to post
Share on other sites
4 hours ago, khariV said:

I've actually had decent luck with mine - no jams to date and I've driven maybe a thousand brads.  I do have to say that it is quite finicky when it comes to sinking nails fully. If you don't get the angle just right and have the face fully flush against the work piece, you've got a decent chance of a nail sitting proud of the surface when it fires.  This is more of a problem when you're in a tight spot and maybe can't get the gun all the way in or are at an angle.

 

I would agree. Definitely need to make good contact and keep it pressed tight. I use Hitachi nails from Lowes and don't have too many jams. I've shot several thousand through mine. I am 100% cordless with Milwaukee, so I do have that pressure to stay on the same platform and not introduce a new brand/battery, so it's worth it to me to stay and deal with a few minor issues.

Link to post
Share on other sites

 I was speaking to a Milwaukee sales rep at Home Depot and he had mentioned, not using any type of coated nails (like  paslode nails) in the M18 gun. 

 He said he gets his nails at Lowes 

 I believe he said he used porter cable nails and had no fastener jams .

 I think I might pick one up and if I am not happy with it I will return it  .

 

Link to post
Share on other sites

I have the 16 and 18.  The 16ga is complete trash, and jams almost constantly.  I sent it in under warranty and they sent me a refurbished one that is slightly better but still more of a nuisance than it's worth.  The 18ga is better. Still jams way more than any of my air guns but its tolerable.  My biggest issue with it is its wildly inconsistent depth of drive.  It will over drive one nail, then leave the next proud.  It's ok for punch list stuff, but I tried trimming a whole house with it and wouldn't bother doing that again. More hassle than worth.  It also leaves an enormous hole, almost double the size of a normal 18ga gun.  Now I bought the Hitachi 15ga a couple months ago and it's far superior in every way, so much so that I rarely use my air 15ga, and I intend on getting the 18ga Hitachi at some point.

Link to post
Share on other sites
  • 3 weeks later...

Gotta say... Milwaukee makes great tools but absolutely the worse cordless nailers... dewalt 20v nailers are very good, we use them everyday framing, putting trim on......but for finish work myself and other finish guys I know,switched back to air guns (grex) and use the DEWALT cordless compressor...it will run two trim guns no problem....I went cordless guns for a while till that compressor came out....love the small air guns again.

Link to post
Share on other sites

I own the Milwaukee M18 15 gauge nailer and it has been fantastic, I mainly use DeWalt and Porter Cable nails and have never experienced a jam, not once.  I have pushed a lot of nails through it, from the shortest to the longest that Milwaukee says it will shoot and all have worked just fine.  It can be finicky if you're not careful when shooting on an angle and I've had a few nails left proud of the surface but they are mostly due to my failure to pay attention and get a good full positioning prior to firing.  All in all I am extremely pleased and wish they would get an M18 framing nailer to market. Their pneumatic framing nailer has been rated again and again as the best or one of the best so I hope they can translate that success to their battery version, still waiting.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Member Statistics

    14,648
    Total Members
    414
    Most Online
    Reginald Molehusband
    Newest Member
    Reginald Molehusband
    Joined
×
×
  • Create New...