Jump to content
  • Cresent.jpg

Sign in to follow this  
BJAYB43

Swapping blades

Recommended Posts

Need some pictures I’m not familiar with that model


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Have you checked the manual?

 

Quote

 

Inserting the Saw Blade (see figure A1)

Clean the shank of the saw blade before inserting it. An unclean shank cannot be fastened securely.

 

Push the saw blade holder 13 upward in the direction of the arrow. Insert the saw blade 8 (teeth in cutting direction) to the stop into the saw blade holder. While inserting the saw blade, pay attention that the back of the saw blade is positioned in the groove of the guide roller 7.

 

Precise cuts are only possible when the guide roller 7 faces closely but not too tight against the back of the saw blade (the saw blade 8 may not be bent by the guide roller). If required, loosen screw 17 and move the holder 16 of the guide roller in such a manner that the guide roller faces closely against the back of the saw blade. Tighten screw 17 again. f Check the tight seating of the saw blade.

 

 

I attached the relevant pics.

2020-01-12 17_09_18-Window.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Member Statistics

    13,994
    Total Members
    414
    Most Online
    PostsOnPercocet
    Newest Member
    PostsOnPercocet
    Joined
×
×
  • Create New...