framer

Try to spray it into the trigger. You may have to open the shell to get better access.

Google the "(model number) parts"

You can easily Google for a parts diagram.

Because they are fake. And a bad fake at that.

Make a mark on the fence. Or clamp a wood block to the fence.

The 8.25 saw can do a lot. And it's portable. What do you need a 10" blade for that the 8.25 can't do?

I just don't understand why they make tools more complicated. This bluetooth stuff is a waste.

Yeah looks like 12v versus 18v. Your drill is 18v.

I just noticed my saw has the same movement. I figured I could just tighten the center bolt. But I guess you say that don't work. Is there a shim or washer under the rotating portion that can be removed or ground down?

well, i have the cordless version of that saw with the 8.25 blade. perhaps a very minor complaint would be the smaller blades are harder to find, but the oem blade has been good.

its hard to tell just by looking at that schematic. i'd have to see it in person!

In my experience, using extensions always lessens the torque on any impact, air or cordless. the more extension you have, the more it absorbs the hammer action. are you using solid 1/2" drive extensions?

i dont know. all i see and use is yellow!

its not really a clutch. its a spring loaded hammer mechanism. when enough pressure is encountered, the hammer rises, turns, and impacts. if its not hammering, is it stalling? any grease should work inside it.

its a nice little saw. very small and compact, which makes it easy to transport or keep in the van. it'd be nice if dewalt makes a saw like it with a bigger blade. 10" would be nice.

one of the newer versions(maybe atomic) doesnt have the threaded hole on the side if you want to attach a belt hook.

well most of your wish tools dont seem like something profesionals will use much.

when you take your finger off, are you making sure the red flap is not swinging down and hitting the stop button?

i believe dw9116 charger works, and you can get them dirt cheap on ebay.

why would you recommend that one? it only has 150ft lbs torque. and for a few dollars more you can get so much more power. i'd recommend the dcf899h with the hog ring. its rated for 700ft lbs. https://www.amazon.com/DEWALT-DCF899HB-Brushless-Torque-Impact/dp/B07LGFCH6Y?th=1 you could use that one to remove wheel lugnuts, or anything.

how are you blowing all these speakers? and nice socks!

have you tried another battery? next thing i'd do is probably start taking it apart....

you put a level on the saw deck to make sure the fence is straight? and not bowed in the middle?

where is the main shaft that holds the blade? looks like more hassle than its worth.

sorry cant help. but have to say this is such a stupid feature.