Jump to content

DwTedII

Members
  • Posts

    16
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by DwTedII

  1. Somehow the plastic gaurd that also cuts the line dropped both screws and the gaurd went flying ! I can't find the correct screws for it ! Does anyone know ? Dewalt DCST922
  2. So I fixed it ..........I took it apart to see what I could see. Then I plugged the cord into the body....played with the 2 speed switch and hit the trigger and got it to run ! So I put it back together and of course it DIDN'T run ! Scratched my head and to the cord off the body and took my box cutter blade and spread those pins open just a little, plugged cord back on body and then outlet......then I hit the trigger it RUNS...it both gears ! By taking the handle apart, the cord just fit a little better , than I was able to figure out what the problem really was !!
  3. So your saying after I undo the plug and try to figure out witch 2 prongs are the correct ones, I should be able to put my meter across the prongs and move the switch to check and see if the resistance changes ? So the big deal is figure out what 2 prongs ? THANKS Ted !
  4. The serial # has long gone been worn off ! I have this OLD Milwaukee 6507 Sawzall that stopped working ! I had it plugged into an extension cord it simply quit ! I did then plug it directly into an outlet ..nothing ! It doesn't make any noises when you play with the cord and/or the trigger ! What I did on the job site in order to narrow down the problem and make sure it's NOT the cord itself, it was undone then I took 3 small nails and put them into the holes , then plugged it into a GFI outlet and see if had power at those nails ! I had a KLEIN current tool and at one nail it went red, saying that I do have power going through the cord ! So the next question IS, it is the brushes, I pulled both out, they were clean, but they are only about 3/16 of an inch ! So it begs the question, how little will these 6507 work with ? OR...is it the switch ? I would think if it was the switch, there would be some sort of intermittent thing going on when work it ? Not just dead ! ? So what can I do to figure out EXACTLY what the problem is ? Many thanks, Ted
  5. I got the part #'s from the Milwaukee parts blow up ! I just took another longer look at it. It looks like maybe it could be a simple as taking off the handle ! The brushes seem to be back there ! Thanks !
  6. Hi ALL! I have a Milwaukee Corded Hammer Drill, model 5380-21, serial #B01DD13420298. It needs new brush, I've found them. Jjust HOW do you do this ! I don't see 2 nice un-screwable compartments I can EASILY undo and take out the old and install the new ! Is there a step-by-step instruction somewhere ? I didn't see anything on youtube! Many Thanks, Ted
  7. Thanks framer ! Gonna order replacement right now from the old Ebay ! Ted
  8. Really ! Just those 2 torx screws ? How is the blade lever held in ? Does it just snap in ? If all above is true....I'll just order me up a blade lever from the old Ebay ! THX, Ted
  9. Hi ALL! I have a Dewalt 20 V DCS 381 reciprocating saw I got as a part of the 5 piece kit . It IS under 3 years , so the warrantee is good, but a pain, because the factory place is an hour away. Yes I know that Dewalt with send me a shipping coupon, but I'll be without the tool for some time ! So I'm wondering how difficult is it to replace that little yellow blade thing ? I have looked on youtube and the web can't find anything ! And the part is easy to get on Ebay. Thanks, Ted
  10. Just cleaned and pinched contacts....NOT the problem. How do you replace brushes ?? THANKS, DwTedIII
  11. Hi ALL! My cordless DC 385 Reciprocating saw is dead......most of the time ! If you slap it towards the top it might start up again. So is it the brushes OR switch ? And how easy is it to fix whatever ? MANY thanks, DwTedII
  12. I got my jigsaw with a 6 PCS 18 VoltXRP set. So...just why can't they do that again with the 20 V Ion ??
  13. I was looking around the Dewalt Outlet. Seems that the "Premium" multi piece sets, are the ones that DON'T come with any FreeBie Bare tools ! Bummer !
  14. Hi! Just started looking into replace my old 5 pc 18 V XRP set, with a 20 V Lithium 5 pc set. I just stumpled over 2 , 5 pc sets, ones "regular" DEWALT DCK590L2 , and the other is "Premium" DEWALT DCK592L2 . Just what IS the difference other than cost, I can't figure it out DwTedII
  15. Hi! I'm looking into buying a 5 piece 20 Volt Lithium set to replace my old 18 V XRP set. I see as of yet, you can't get a set including a 20 V jig saw. So I'm going to keep my 18 V xrp jig saw. The question IS, will the 20 Volt Lithium battery fit AND run the Jig saw DwTedII
×
×
  • Create New...