mike_dave
-
Posts
71 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by mike_dave
-
-
@Biggie I have no issues with Milwaukee tools. Actually, I quite like them. They have served me very well, however they're significantly more money here in Canada, which is a motivating factor for me.
@Jronman their nail guns, and router.. I'm certain more will come.. Milwaukee doesn't seem to have much drive to look after the carpenters. And the tools that Milwaukee does offer, Dewalt beats them on price
-
Hey guys. Lately I've been having serious thoughts about getting rid of my Milwaukee and investing in some dewalt cordless. As a carpenter dewalt really has a ton of tools out There, while Milwaukee lacks. (I was an electrician when I bought my Milwaukee set). Dewalt and Milwaukee pricing are night and day different. Dewalt is much cheaper in Canada. I feel as though a few of my tools still owe me since they're relatively new. I spoke wi a Dewalt rep at a trade show and he said they offer a trade up program..
Basically im torn.. Do I keep plugging away with the Milwaukee? Really what I want is a couple more batteries and I'll be mostly content..
If I switch to Dewalt I'm looking to get the same 6 tools I have in red, plus a few batteries.. But then the list goes on;)
should I wait a few years? Or do I make the switch? I don't want to feel like I've "lost" after buying the new tools, and getting rid of them shortly after. Would I have much luck selling any perhaps? I don't know how much a demand there is for used tools..
cheers!
Mike
-
This cabinet turned out great! I have loved following along. I have always been excited for the updates, and couldn't wait to see it finished. Well, now part of me is sad it's finished! Haha.
Great Work, and enjoy!
-
2
-
-
18 hours ago, regopit said:
Just once you get the hang of it you really see a time savings. If you make a jig to hold your trim it makes so much easier. go over to you tube and watch Grey Katz he gives some good tips on the Collins foot.
You can free hand it nicely too. Definitely the way to cope trim in my opinion
-
Pack out for sure. I was really hoping they'd do a system. I can't wait to check one out. I've been thinking about building a box for my cordless, but I'll delay it even a little longer until I can see them.
Other then that Milwaukee let me down. The fuel hackzall is nice, and don't get me wrong cordless heat gun and soldering iron are quite cool to see. The lights are good too, but nothing really blew me away. Dewalt really set the bar high last year. I understand Milwaukee has found their niche market in plumbers and electricians, but I would love for them to expand their horizons personally. Please tell me I'm not the only one who thinks this haha
-
1
-
-
A few suggestions-
avoid using a thin kerf blade. In my experience they can wobble and all of a sudden your perfectly cut miter is a little open and filling them never looks good.
When nailing inside corners I tend to not nail right in the corner. If there's a hollow or any undulations in the wall, nailing right in the corner can draw your piece of baseboard in and once again you'll have a gap
18 gauge is nice to use vs a 16 because the smaller diameter nail leaves a smaller hole which is much easier to hide.
Good luck and be sure to show off your work when it's done!
cheers
-
2
-
-
On January 31, 2017 at 7:20 PM, JimboS1ice said:
What blade size? I would reduce your table thickness to maximize the depth of your cut, make sure you use can handle lengthy rip cuts, can't saw I would recommend making your own table saw but I'm interested to see how it turns out
Sent from my iPhone using TapatalkSomething I'm personally scared to try to build, but I have seen some excellent ones done on YouTube, and I wouldn't have any issues with using them.
Go for it OP.. I think I can speak for many of us and say- do a
build thread on it!
-
very cool! How did you get into this?
i once did a service call for an older gentleman who was a radio finatic. It was fascinating to see his collection, and fun to see all the joy he had to talk about it
cheers
-
1
-
-
3 hours ago, Jronman said:
Was first time I used the 20v hand planer. In fact first time I had ever used any hand planer.
Keep at it and you'll get it. It Takes some time to develop a good technique
-
Gotcha ?? glad you had already thought about that
-
1
-
-
On January 11, 2017 at 10:12 PM, ChrisK said:
Well, I finally got to do some work downstairs. Not much, but I'm a busy dad now soooooo....
Sent from my iPad using TapatalkHey Chris just curious.. Did you by any chance put a moisture barrier below your bottom plate?
-
On December 22, 2016 at 9:05 PM, KnarlyCarl said:I'm pretty lousy getting other people tool gifts. Only thing i can think of is getting my sister a milwaukee hand warmer to help with her Reynaulds.
Her birthday was the 16th, so we went to see her and her husband in their new (to them) house. Got her the 3ah m12 battery and a multi voltage charger with it. She already loves it...
That's about it.
I should get one of these for my girlfriend. She has Reynaulds too
-
1
-
-
3 hours ago, dwasifar said:
Why? It hasn't broken. I just don't use it much. Don't usually need it.
I think it would really shine when working a lot with threaded rod
-
On April 24, 2016 at 1:30 PM, Kato said:
You can use a string too. Put the screw or whatever in the middle, tie a string around it and your pencil the measurement you need, then run your line. Tie the string loose around the screw and the pencil so it doesn't wrap around either and make your circle oblong.
Of course if you don't have your compass handy, it might be a similar problem if you don't have string handy...
You can draw a circle with a couple of nails and framing square too
-
Never played before...
rock music?
-
Steven, I wish you all the best in 2017. What a rough stretch you have gone through.. We're all fortunate to have such a great gang to come and vent to, learn from, and laugh with.
All the best
Mike
-
4
-
-
I typically change my own oil. I've gotten burned before going to quick lube places when all my extra driving caught up to me and I noticed I was due. Ill never do that again. Occasionally I go into a shop to have it done. I know the family that owns it and really trust them and their mechanics. For 35 bucks for oil and filter plus a bumper to bumper inspection, you can't beat the peace of mind.
-
1
-
-
On December 23, 2016 at 0:57 AM, BMack37 said:
I think every team does
Just replace the redwing with a maple leaf eh!;)
-
6 hours ago, ChrisK said:
Here's some pics....
Sent from my iPad using TapatalkBeautiful little guy you have their Chris. What a special Christmas. Just wait, next year he'll be mobile! I got to spend Christmas with my nephew who's almost 15 months and it was a riot.
Merry Christmas everyone!
-
1
-
-
The squeaky wheel gets the grease.. may seem like a dirty move, but tell them how disappointed you are and that's your considering making a switch to a competitor.. it does work...
-
Chris, congrats! I cannot wait to see this shop all set up.. after scrolling through the thread and the pictures it is safe to say I could have a ton of fun in here. such a great collection you have. can you give us some insight to what tools are next on the list, or perhaps what projects you have in mind?
Cheers
-
1
-
-
I have gotten in touch with them once. I got rather short replies and I felt like I was an inconvenience to them. Not to mention it took me asking three times for them to let me know where my closest authorized repair center was.. Not impressed as I heard from many that Milwaukee has very good customer service. best of luck to you
-
Are you a framer?
I have many buddies who own them. They love them but don't think they're worth the money. They all received them as gifts and would never pay full price for one themselves.
-
9 minutes ago, RobertJenkins said:
Same to you man
Looking forward to your posts and insight
-
1
-
Switching from Milwuakee to Dewalt?..
in Power Tools
Posted
@Jronman totally. I have no doubts about the Dewalt tools. I know they'll serve me just as well. Really almost everyone I work/have worked uses Dewalt cordless.
Makita is up there in price too. Economically speaking I think Dewalt is the cheapest, and also most commonly sold in stores too, but you're right makita is definitely a top notch company too. They sure do make a nice track saw!
@khariV I thought about that. Those guns and router etc aren't a must have right now.. they can wait. I need some more batteries for my Milwaukee which I'm not sure I want to get with me really leaning towards a switch to Dewalt. So even if I did say buy a gun and router and some batteries sure it would help ease the transition however it wouldn't solve my Milwaukee battery issue.
my tools are a big part of how I make my money. I know I couldn't sell the red tools for what I paid, but they've paid me many times over