Andrius
Members-
Posts
116 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Andrius
-
Hello, I think it will be armature fault. Just try to connect motor without switch to battery and check how motor runs - I think it will not run.
-
Makita Handle Set for Ls1211 Miter Saw. part #182597-2
Andrius replied to JermFace's topic in Power Tools
Your welcome, This is my store. Normally items to USA arrives in 2-6 weeks... Orders is sent from Lithuania -
Makita Handle Set for Ls1211 Miter Saw. part #182597-2
Andrius replied to JermFace's topic in Power Tools
Hi, hope that will help: http://partssupply.co.uk/index.php?id_product=2429&controller=product&search_query=182597-2&results=1 -
Hilti is best tools in market, but here in Lithuania it`s to expensive to repair them after 3 years warranty...
-
It`s gear assy fault. This is wear and tear sign. It can`t be hammering all the time, just press drill chuck to wall or table or something else and try to turn drill on and you will see difference it`s hammering or not. For that noise it can be two problems one is gear assy and second is when drill stops it stop slow not right after that when you release button. If drill stops slow wen you release button then you need new switch because electronic brake is not working.
-
Yes! You need switch Just check carbon brushes and ball bearings Old tools is worth of repairing
-
Great deals and prices is very good for everything
-
Maybe you made video of cleaning? And waiting pictures Some times all is need is to clean the tool
-
Nice Knipex pliers You will be happy with them
-
If you wish I can try to get it in Europe and send it to. Just pm me
-
I think with new batterie it will perform same s your pod style drill, but I think that two batteries will cost more then you paid for tool
-
You need to change belt rollers and check ball bearings. Maybe some ball bearings are not moving smooth so belt slips because its hard to spin other parts...
-
Hello, change it to new chuck. Inside you will find dirt or broken jaws gears. 30 USD for chuck? For that price you can get good metal chuck. Your chuck is 1/2" and it takes 13 mm max width. Link for example: http://www.ebay.com/itm/13mm-MANGANESE-STEEL-KEYLESS-CHUCK-1-2-x-20-UNF-HEAVY-DUTY-METAL-DRILLING-63361-/401140645496?hash=item5d65d87e78:m:m2ivhKzAEf-Mwcg7Q3S6WJg
-
I will go for Hitachi because they making good tools But it`s 26 dollars so I think if it will not work good you will not be sad
-
I love that holder because of it`s stregth
-
I love this new tools, they are so nice for hand And why you are not using Makita ultra mag bit holder B-28531?
-
just clean it
- 3 replies
-
- autofeed screwdriver
- dewalt
-
(and 1 more)
Tagged with:
-
it cool Star Trek
-
Hitachi's newest impact driver...WH18DBDL2 (3 impacting anvils?)
Andrius replied to aabee's topic in Power Tools
That`s really cool -
Thank for comparison, nice new drill
-
Its normal because its striker inside cylinder and it going back becouse of hit to chisel and then gong forward from compresion and back agaun... But if your tool starts to kick back to your hand then you need replace o-rings in hammer mechanism.
-
I am doing it in same way and ot allways work
-
Check carbon beushes and check armature ball bearings. And when you take motor apart check yoke unit for dust or some dirt on it. Clean dust from switch with air compressor. Then check if your chuck not moving from gear assy, because its ball bearing inside and some times its need to be replaced. And clean batterie contacts for dust for good connection with batterie. If you will burn it I can buy it
-
check tools dimensions and you will know that But I think you can find case to fit. What is new model you have and old model?
-
I think you need to hit him fingers with hammer - it will help