RTJR

Thanks! 137.90 for the 2 pack on amazon .

I've been fine with the 4.0 and 5.0 20 volt packs. I'm not constantly cutting or drilling or screwing every minute of the day, but longer run time is a nice thing. Even when I might be, I have enough packs at the ready that it doesn't matter. There's a good deal on the 6.0 packs right now, and I already own 20 volt chargers. When I need a circular saw I nearly always grab the DC391, even when my elecrtics are in the room. I just love the left blade. I let the saw cut rather than pushing it through. Yet, here's where I'd like a bit more run time or grunt. My questions are: Will the 6.0 be a noticeable upgrade over the 5.0 in the circular saw? Is the Flexvolt 2/6/ah battery a big step up over the 6.0 20v max in the circular saw. Does anyone have first hand experience making the comparison? TIA!

I can't seem to find the battery sizes in AH for this kit. Anyone have a secret source to find this info? http://www.homedepot.com/p/RIDGID-GEN5X-18-Volt-Cordless-Combo-Kit-6-Piece-R9625N/300342949

Thanks. I don't understand the question though.

Me two

I wanted to follow up on the DW0811. I didn't have very high expectations for a multi-aperture laser at this price point. Mostly, I just wanted a kick around unit that wasn't a $600 heartbreak if the worst happened. The first unit that arrived was a mixed bag. The plumb line was pretty much dead on over 15'. However, the level line was out at least a 1/4" over 30'. The spec claims that acceptable tolerance over that range is 5/32" which is .156", or just a shade over an 1/8", or just a skosh over 3mm. The stated acceptable tolerance is a bit loose for me, but it's just a tolerance. It doesn't mean the error is defined by that number. So I took a chance on a second unit. I have a 30' space set up with both vertical and horizontal benchmarks. The replacement laser was just about dead on in the horizontal plane. I didn't see a variation greater than 1/32" to the match marks in the calibration tests. Fantastic. The vertical line test showed this new unit was off by a good 1/16th to the left over 15' though. Not as good as the 1st one, but no big deal really. 1/32nd over 8 feet is nothing in the real world. When marking walls for setting marble or granite, or whatever, it's no problem to simply mark the other side of the line to compensate for this error. So, this *can* be a good buy. But, like any laser, you must check the calibration when you first get it and regularly thereafter. I've purchased far more expensive ones that were fubar out of the box. It happens. This one survived shipping for the most part. We'll see how well it survives washboard roads and potholes on the way to the job site. If it makes it through to the 30 day return window it'll be a keeper.

I already have big guns for big jobs. I went with Bosch 12 volt max simply because I wanted the smallest possible driver and impact for tight spots. I'm happy with them.

My old cross line laser bit the dust last year, so I was on the lookout. The DW088LR (red) popped up as a lightning deal so I snatched it. I was only expecting a cross line for walls and had no idea that it could wrap a near 360 degree vertical line across the floor and ceiling. It's also very accurate. Awesome!

I have lasers on my mind. I was on a job today where there were multiple contractors. I was laying out lines with my laser. I vaguely heard a discussion about red vs green. Then, "lasers hurt your eyes" talk. Then, a "no lasers ever" guy piped up and said "The romans didn't have laser levels and neither do I". "They didn't have electricity or toothpaste either. What's your point?", I replied. There was a little more friendly for and against and back and forth. In fairness, the guy is talented and was doing some very fine tile work with his Stabila beam levels and straight edges. Many of us have and could still make due with those just like we did before lasers became good enough. But why I say? They make my life waaaay easier. Anyway... So, whatchya got?

Dewalt claims that both have pulse mode. Neither of my red Dewalt lasers actuate my PLS detector and I don't own a Dewalt red detector, so I can't comment on the effective useful range of either.

The DW0811 will do plumb/level cross lines plus full 360 degrees horizontal The DW088K is just plumb/level cross lines. The 0811 has a pendulum lock and the DW088K doesn't. I just picked up a DW088LR. Cross lines, but will wrap the room if set in a corner. It has a pendulum lock, so I chose it over the DW088K. Luckily, it was dead on accurate when tested. I have a DW0811 arriving today. If it passes calibration tests it'll be a winner. Amazon gold box deal of the day last week. $120!

https://www.amazon.com/DEWALT-DW089LG-Beam-Battery-Green/dp/B017LTFSSG This is $549 most days of the week. It's been as low as $362 depending on how the wheel is spinning during the past 24 hrs.

Yeah, I know...The thing is I'm very accustomed to the left blade, especially since I'm more likely to grab the 6 1/2 most of the time. I have 2 DW364Ks for the heavy duty stuff, so I'm covered on the right blade thing. So, did you ever try the DCB361 2ah, or just the DCB360 4ah?

A few years ago there was a guy selling rebuild packs, not on eBay, that were specific to which generation of battery you had, but he's long gone. I'm unaware of anyone that offers anything at this point.

My original A123 36 volt batteries are kaput. Is it worth it to buy a 2 ah DCB361? Has anyone run the new batteries in the 7 1/4" circular saw. The runtime wasn't so hot with the originals. I know I can get the 4ah batts from overseas, but the prices are unrealistic at this point. Thanks!

Glass, I got the Freeport HD to concede to the same deal on the 790 scms because of that ad. Fortunately, they were out out batteries. Their display model had a fair amount of head sway/deflection in the extended position. I tried the display at Westbury and it was the same. Since I'd only be using it as a trim saw, I had to pass when the Freeport manager called to let me know the batteries were back in stock. I really wanted this saw for an all in one trim solution. I'm sure it's fine for lots of things. I worry that it wouldn't be great for compound cutting large crown, or bevel cutting other large material on the flat because of the deflection. Too bad there are no deals on the Flexvolt 12" CMS. I would've snapped it up. I ended up pulling the trigger on the 716XPS. I caught a price drop and the $25 off deal at Amazon. Three fiddy with 2 day prime shipping. It'll do 6 3/8" crown nested and 6 1/2" base standing against the fence. I'll be sticking with my LS1013 for oversize crown, skirting, etc. If you have a different experience than I've projected when you use yours, please post about it. I'm OK with being proved wrong. I'd be interested in finding out from a fellow pro how this performs in the real world.

77ford, Have you cut anything with the saw yet? The reason I ask is this: I've heard that the slide might bind slightly when set to a right bevel. This morning I met the rep at another HD. Yesterday he told me where he'd be today, and that just happened to be on the way to the job. Sure enough, the slide stiffened a bit as the head was being slid towards the table while being set on the right bevel at 45. Left was smooth. I only wonder if it'll get better or worse? I've had the LS1013 since '98. It's as smooth now as it was then. I've been cutting 5/4 x 10 plinth blocks for columns the past day and a half, so I'm in the slide-saw-zone. Anyway, if the DW binds I'm concerned it might jack with the cut somewhat, like chatter or walk. I'd like that not to be an issue. I want this bad boy, and I want those batteries for the rest of my DW 20V toys! However, I can't deal with whacked cuts on the material I'm working with. Just too pricey.

I've had the 745 for 8 years. It's a great basic saw. I'd have a hard time adjusting to anything with less than the rock solid fence it has. If It dies I'd get another one.

The DW rep was at the local HD this morning. By the time I walked away the pitch was 699 for the saw, cord option, and four Flexvolt batts and a charger. The slide seemed a bit smoother than the standard corded unit on display. Other than that , both saws appear to be identical. Seems like a good deal for 100 bux more. Wouldn't mind having the 6.0s for the 6 1'2" circular saw that I use constantly. Do the pricing deals get any better? Fathers day or black Friday? I'm well used to cutting crown flat in my very well preserved Makita LS 1013, but it kinda sux. I'd rather nest smaller crown for sure. I've been eyeing 12" miters forever for that reason. Ah, what to do?

Craig, I picked up the PS22 a year and a half ago and was wishing/waiting on the PS42. But, after watching your vid I settled on the PS41 and PS31 combo from Lowes for $129. I prefer the smallish 12 volt tools for kitchen cabinet installs. If my pile of Makita 12 volt max stuff, which was otherwise just fine, hadn't been eating chargers and batteries I probably would've stuck with those. The 2.0 and 4.0 Bosch batts seem to last and last in the PS22. Maybe I won't get the run time in the brushed tools. However, I didn't see a big enough jump in horespower in your vid to stop me from indulging in a delayed impulse buy! Thanks for the movie.