Jump to content

Mr Mojo

Members
  • Posts

    0
  • Joined

  • Last visited

Profile Information

  • First Name
    Kenneth
  • Location:
    The Netherlands

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Mr Mojo's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi Mr Yellow ,

     

    I read one of your posts/comments regarding your DW744 tablesaw and your difficulty setting it to 45degrees. I have the same saw and the same issue. Did you ever fix it?

     

    Regards,

     

    Kenneth

    (also from The Netherlands..;-))

    1. Mr. Yellow

      Mr. Yellow

      Hi Mojo/Kenneth,

       

      My fix was to remove the plastic cover underneath the saw.

      Also because of the design, it builds up sawdust inside and running the saw would eventually throw the sawdust back onto me when using the saw. 

      Bit of a hack job since the dust control is next to none now ;)

       

      You could just take a peek underneath and see if you can adjust anything to fix the issue.

       

      Best,

      Michel

    2. Mr Mojo

      Mr Mojo

      Ha,

       

      Yes, dustextraction isn't it's strongpoint.

      I just cleaned the saw inside and took another good look at it upside down. I had to anyway because the cloth bit of the dustcover fell from the aixle of the pinion system. When I had it all cleaned and back in place I tested the 45 setting again and it just makes it now (did a testrun and it made a clean 45 cut). It runs with the metal sawcover agains the pinion system aixle at 45. I ducttaped the loose metal dustcover to the plastic dustcover to make the most of the room and maybe improve the dustextraction a bit. It does seem to do both... for now.

       

      Thanx

       

      Kenneth

×
×
  • Create New...