martinlee247
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by martinlee247
-
-
Hi all, just joined forums, keen but not very good DIYer, really like taking things apart and seeing if they still work after, usually bikes and chain saws....
Live in Shropshire UK and work in ops
Sealey SDM30 bench/pillar drill chuck issue
in All others not listed
Posted
Hi, I have a Sealey SDM-30 https://www.sealey.co.uk/product/5637198366/5-speed-hobby-pillar-drill-580mm-ht-350w drill and I need to remove the chuck. The instructions suggests it has an MT2 taper sleeve see here https://www.manualslib.com/manual/1850477/Sealey-Sdm30-V2.html?page=2#manual
I have tried various ways to remove as suggested from some g-searches, including:
I eventually spoke to Sealey tech support who said I will need to remove the whole shaft from the drill and get it in a vice, but when I looked at an explode drawing it looks complex with at least 3 bearings and not that confident!
So I wanted to reach out to the forums to see if anyone has had similar issues and do they have any suggestions on how to remove without dismantling the drill?
The drill looks very similar to Clarke SPD5, SIP01700, Energer ENB67, Titan TTB54, Draper 350w etc possibly the same chuck fitting.
Any help is greatly appreciated
Martin