Jump to content

Is my makita drill broken?


Recommended Posts

Hello, 

 

so i recently bought a cordless makita combo kit ( impact driver and drill driver)

and while i was using the drill driver at work i noticed something odd, when tightening drill bits the chuck seems to click after it has been tightened? Is this normal or is there something wrong? Sometimes it would click/spin quarter turn multiple times after being fully tightened. There has been times were the drill bits have fallen out(chuck loosened by its self) Would appreciate any help

Link to post
Share on other sites
1 hour ago, Beens said:

Hello, 

 

so i recently bought a cordless makita combo kit ( impact driver and drill driver)

and while i was using the drill driver at work i noticed something odd, when tightening drill bits the chuck seems to click after it has been tightened? Is this normal or is there something wrong? Sometimes it would click/spin quarter turn multiple times after being fully tightened. There has been times were the drill bits have fallen out(chuck loosened by its self) Would appreciate any help

Welcome to the forum Beens! Sounds like a ratcheting chuck to me. As you continue to tighten the chuck continues to ratchet tightly and keeps that's drill bit in place!

Link to post
Share on other sites
9 hours ago, ChrisK said:

Welcome to the forum Beens! Sounds like a ratcheting chuck to me. As you continue to tighten the chuck continues to ratchet tightly and keeps that's drill bit in place!

This.

Also if you're using bits with flats that you tighten in the chuck, just to make sure the chuck is tightening on the flats, pretty obvious stuff, but I've seen people not check that simple detail.

And welcome aboard

Link to post
Share on other sites

Well this is a coincidence, I just walked out to the shop at my in-laws, and this is how I found the drill that my brother in law was using:. 

IMG_20160817_190743664

He's a little iffy when it comes to these things but perfect example of people not noticing these things

..

  • Like 1
Link to post
Share on other sites
On 2016-08-18 at 2:14 AM, KnarlyCarl said:

Well this is a coincidence, I just walked out to the shop at my in-laws, and this is how I found the drill that my brother in law was using:. 

IMG_20160817_190743664

He's a little iffy when it comes to these things but perfect example of people not noticing these things

..

I think you need to hit him fingers with hammer - it will help :D

Link to post
Share on other sites
16 hours ago, jeffmcmillan said:

That's why you never tighten a chuck by hand.  Always hold the chuck and run the drill so it catches on the flats.

So you know it is centered, then I make sure the jaws are on the flats. But then I give a little extra twist by hand once the bit is in place to tighten down a little more

Link to post
Share on other sites
On 2016-08-22 at 1:48 PM, KnarlyCarl said:

So you know it is centered, then I make sure the jaws are on the flats. But then I give a little extra twist by hand once the bit is in place to tighten down a little more

I am doing it in same way and ot allways work :)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Member Statistics

    14,911
    Total Members
    859
    Most Online
    David2019
    Newest Member
    David2019
    Joined
×
×
  • Create New...