KnarlyCarl Posted April 13, 2017 Report Share Posted April 13, 2017 On 4/11/2017 at 6:44 PM, jrk_indle84 said: Got it back today, they replaced the trigger and soemthing else don't know what. Don't have any batteries here at house but will get put to use first thing tomorrow so should be all good. Apparently the direction control button must of had some dirt and whatever in it because now it's pretty touchy so haveta make sure and kick it around in the dirt little in the morning ha. Kind of annoying every time put tool down it flips that switch but is what it is. Overall pretty happy with first time using warranty service and got everything pretty quick. Sent from my SM-G900R4 using Tapatalk same thing happened to my 2753 as well, new trigger, painless warranty through the e-service portal. The direction switch however, is not a problem like yours sounds to be Quote Link to comment Share on other sites More sharing options...
Jronman Posted April 13, 2017 Report Share Posted April 13, 2017 On 4/6/2017 at 6:31 PM, Framer joe said: Never ever had a problem returning a Dewalt cordless tool within the three year warranty to Home Depot or acme...just swap out,,.realize your at 4 years so that says a lot for Milwaukee tools....it is a solid company,I just prefer Dewalt... do you ever use the 1 year free service? Quote Link to comment Share on other sites More sharing options...
Bremon Posted April 14, 2017 Report Share Posted April 14, 2017 9 hours ago, Jronman said: do you ever use the 1 year free service? I never have. On brushless tool based off corded tools that last forever what do they even service? I suppose if you use the 692 a ton they could do something for you but not really sure what a "service" would entail on most things...wiping down with a damp rag and making sure the brushless motors haven't mysteriously grown brushes? Swap out some triggers etc that show early signs of pooping their pants? 1 Quote Link to comment Share on other sites More sharing options...
jrk_indle84 Posted April 14, 2017 Author Report Share Posted April 14, 2017 same thing happened to my 2753 as well, new trigger, painless warranty through the e-service portal. The direction switch however, is not a problem like yours sounds to beYea I'm not sure what's goin on with that switch. It seems pretty light. Usually you can kind of feel a click when you cycle forward and reverse, but can barely feel it on this one. So not sure what's goin on. Other day used it to set up forms for pourch cap and while putting in screws kept hitting that button and having to stop and switch it back. So hopefully don't keep that up or it probably turn into a reserve drill and will pick up new one. Sent from my SM-G900R4 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Framer joe Posted April 14, 2017 Report Share Posted April 14, 2017 @Jronman....no can't say I've used free ...service.....my tools get worked hard and in rain,snow,heat,mud,sand....but I wipe em down and blow em out ,,oil what I can after every use and get years out of them...i expect 5 years of hard use ,,then I'll buy new again..if it still works il wait till it's dead....but I've returned tools that died up to 3 years at HD and got a full purchase price store credit every time.....never refused.....plus if Acme has a sale ,,,HD will price match anyone..so making returns is easy.....Never had a problem with Acme either...... . ...plus I think I'd do a better job ....servicing ...my own tools and I can't waste the time without them....I use em everyday ..7 days a week... Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted June 1, 2017 Report Share Posted June 1, 2017 Warranty? Sent from my iPad using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted June 1, 2017 Report Share Posted June 1, 2017 What about this?Sent from my ASUS_Z01HD using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
khariV Posted June 1, 2017 Report Share Posted June 1, 2017 Ummm.... not sure what to say there but that looks like tool abuse to me. Someone needs to go to counseling to treat their tools better Quote Link to comment Share on other sites More sharing options...
BMack37 Posted June 1, 2017 Report Share Posted June 1, 2017 3 hours ago, HiltiWpg said: Warranty? Sent from my iPad using Tapatalk Customer "I was just screwing some 3" wood screws and this happened. It's basically new, out of the box!" Quote Link to comment Share on other sites More sharing options...
AnonymousJoe Posted June 1, 2017 Report Share Posted June 1, 2017 That actually happened to my co worker with a dewalt drill, drilling some holes with an auger and the head snapped off like that Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted June 1, 2017 Report Share Posted June 1, 2017 A defect is a defect! With the crazy amount of torque these tools produce, you think the casing would be beefier! Sent from my ASUS_Z01HD using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bremon Posted June 1, 2017 Report Share Posted June 1, 2017 Lol one of our 4 887s at work fell 12 feet and landed the wrong way I guess; the base of the handle where it meets the battery holder snapped and is now held on by wire and tape. Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted June 8, 2017 Report Share Posted June 8, 2017 Why do you always see Milwaukee's?Sent from my ASUS_Z01HD using Tapatalk Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted June 14, 2017 Report Share Posted June 14, 2017 See what I mean? http://cloud.tapatalk.com/s/5941474d8fdaf/19201604_268080596999698_823819313428299776_n.mp4 Sent from my Pixel using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.