Jump to content

DCD976


Dennis

Recommended Posts

Hi all, I have a DCD796 brushless dewalt drill just over a year old , and the keyless chuck has failed. The dewalt supplier would not replAce the chuck under the drill warranty , as the chuck is made by another manufacturer.  I purchased a new chuck , and found out that the centre retaining pin is not a torx screw, but a fixed pin.

Can someone give me some advise how to replace the chuck with this centre pin

thanks

Dennis

Albany

Western Australia

Link to comment
Share on other sites

If there's no Allen or Phillips head, the "pin" you're looking at is just the end of the spindle.  In this case the chuck is only held on by locktite to the spindle and there is no secondary fastener.  There are other topics about this in the forums here if you do a little searching or if I remember right there are some youtube videos covering it.  They can still be somewhat challenging to get off depending on the damage of the original chuck but it should come off.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Member Statistics

    18,154
    Total Members
    6,555
    Most Online
    garikb
    Newest Member
    garikb
    Joined
×
×
  • Create New...