couchmusician Posted March 10, 2021 Report Share Posted March 10, 2021 I just purchased this saw and after performing numerous cuts on a section of 1 inch square tuning, I cannot get a straight cut. The cut is always at an angle. The blade walks to the right on every cut regardless of how much pressure I use. The factory blade is thin so I purchased a thicker one but still get the same result. Also the holding clamp is not perpendicular to the piece when clamped, regardless of how tight I clamp it. I did make several cuts on a larger piece of material and still get the same results. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.