Steven Posted May 13, 2011 Report Share Posted May 13, 2011 Paint is all worn off, can't see numbers. I can buy a new one from internet. Is it easy or hard? What are the steps involved? http://www.ereplacementparts.com/adjust-collar-p-69823.html Link to comment Share on other sites More sharing options...
kanxrus Posted May 13, 2011 Report Share Posted May 13, 2011 I'm pretty sure it involves removing the chuck, their should be a locking ring holding the plastic sleeve in place. Link to comment Share on other sites More sharing options...
Steven Posted May 14, 2011 Author Report Share Posted May 14, 2011 I also noticed my Fwd/Rev Button does not have a detent click to it anymore, it is very sloppy, I can't tell by the feel if it is in the middle for the locked/safe position or what. Is this problem actually with the Fwd/Rev Button or the VSR Switch or maybe both? Link to comment Share on other sites More sharing options...
ToolGeek Posted November 27, 2011 Report Share Posted November 27, 2011 The two detent clips may have become dislodged, or worn down. Either way I would replace both clips, and the plastic shifter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.