Bingobelle Posted February 8, 2012 Report Share Posted February 8, 2012 I´ve looked but can not find information about material used in the clamshell on competition to Dewalt. So, is Dewalt the only tool maker that use xenoy in the clamshell or is there others to? And also, is Dewalt the only maker that used those special boride magnet in the motors? Regards Link to comment Share on other sites More sharing options...
kjones Posted February 8, 2012 Report Share Posted February 8, 2012 I can't speak to the magnets, but DeWALT is the only maker to use xenoi. The other brands use multiple types of ABS. Link to comment Share on other sites More sharing options...
tooljoe Posted February 8, 2012 Report Share Posted February 8, 2012 my 12v max drill/driver unhooked itself from my belt while climbing down a two story building and didn't break. the drill may have hit the ladder ladder on way down but it was higher than 12 feet straight to ground for sure... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.