jonesr Posted June 29, 2013 Report Share Posted June 29, 2013 just got a max 20V drill & driver kit with two 20V max 1.5 Amp batteries. batteries were charged and lasted a long time. They now need charging. the DCB101 charger shows slow blink in charging and solid when done on both. Batteries are only charging to 14.4V (B- to B+) on both, and do power to drive drill or driver. Charger says 12V/20V. is there some switch or something that must be set to charge the 20V to full 20V? Both batteries are new and no failures are indicated on the charger blinking light. I love the drill and driver when they work (great power), but am now frustrated Thanks for your help Quote Link to comment Share on other sites More sharing options...
kjones Posted June 29, 2013 Report Share Posted June 29, 2013 Exchange the charger. Quote Link to comment Share on other sites More sharing options...
JohnDaddyo Posted August 8, 2013 Report Share Posted August 8, 2013 Exchange the charger. Darn, that's not as easy as it sounds. I don't have a receipt anymore. HATE to pay 80.00 for a new charger. I've probably charged my two batteries maybe 10 times each? Isn't there a little switch inside I can flip? LOL DARN! I should have said that today my charger is blinking fast. Tried two batteries. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.