adrian.horchidan Posted February 6, 2014 Report Share Posted February 6, 2014 How do I remove DeWalt DC935 Type10's chuck? There's no screw inside that chuck. Quote Link to comment Share on other sites More sharing options...
goodski Posted February 9, 2014 Report Share Posted February 9, 2014 I'm not sure that I am an expert on the topic but I just took the chuck out of my DCD950 it also does not have a screw holding the chuck. this is the video that I used to figure out how. My chuck wouldn't hold a bit so I had to use the channel locks. I opened the chuck all the way and then had to break loose the lock tight holding the chuck on with the channel locks. Hope this helps now I just need to find a replacement that doesn't cost an arm and a leg. 1 Quote Link to comment Share on other sites More sharing options...
adrian.horchidan Posted February 10, 2014 Author Report Share Posted February 10, 2014 Thanks. I finally removed that chuck. I heated it with a burner to melt the red Locktite. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.