lukas Posted December 4, 2010 Report Share Posted December 4, 2010 (edited) I plan to buy a new rotary drill (something around 3kg, 750W and 3J impact power, SDS+ connector, D-handle). It should have the ability to independently drill, chisel and of course drill with hammering. The main use will be drilling stone/concrete or bigger holes into iron. My current candidates are Hilti TE30, Makita HR28xx, HR24xx, Metabo UHE26.I did not mention Bosch, because I have bad experience with their angle-grinders lifetime (the green ones burn really fast and the blue one has a dying sound after two years of quite light usage)...Any tips, recommendations, reviews? (can be other manufacturers as well, as long as they produce high quality tools and are available in Europe) Edited December 6, 2010 by lukas Link to comment Share on other sites More sharing options...
Dan - TIA Posted December 12, 2010 Report Share Posted December 12, 2010 I would go with the Hilti I have a friend that has one and LOVES it. Bosch does make a great hammerdrill I would check them again and compare warrantys. Link to comment Share on other sites More sharing options...
Recommended Posts