alec.christofides Posted February 1, 2011 Report Share Posted February 1, 2011 Hey guys im constructing a tv unit for my major year 12 project and i've incorporated a box joint in my design. The box joint is situated on an angle and will be holding the two shelves together. i have decided that to cut these holes out on an angle im going to need to use a router. i was just wondering if instead of making a jig to cut the joint out i could use a router which can be adjusted to cut on the angle?any help or suggestions on any other ways to do this will be greatly appreciated Link to comment Share on other sites More sharing options...
Circusmonkey Posted February 2, 2011 Report Share Posted February 2, 2011 A jig would be the best way to go since you are spending a lot of time making the tv cabinet. I am not sure of a good way to do it without a jog and still get a great hold. Link to comment Share on other sites More sharing options...
Recommended Posts