LastOfTheVee8s Posted August 25, 2015 Report Posted August 25, 2015 I'm starting to upgrade the moldings in my house. Today I'm working on these over-door moldings. Quote
jbw55 Posted August 25, 2015 Report Posted August 25, 2015 Looking good.....are you keeping the flat as is or will you be adding some detail on the face? Quote
LastOfTheVee8s Posted August 26, 2015 Author Report Posted August 26, 2015 I thought about some detail element, but for now I'm going to leave it plain. Quote
JerryNY Posted August 26, 2015 Report Posted August 26, 2015 Looks great! It also looks very similar to what I'm doing over my doors and windows to imitate the originals in my old Victorian. The only difference is I'm using an abacus on the top. Quote
LastOfTheVee8s Posted August 26, 2015 Author Report Posted August 26, 2015 An abacus would be a good addition to this Quote
Maxwell Tyler Ray Posted August 26, 2015 Report Posted August 26, 2015 Looks good..what's you think about those Milwaukee clamps?? Also check out Collins clamps when you get a chance..believe they might be of great assistance for you moulding projects!!! Quote
jrsalas Posted August 26, 2015 Report Posted August 26, 2015 Looks bitching! It should complement the door good.Sent from my VS985 4G using Tapatalk Quote
LastOfTheVee8s Posted August 27, 2015 Author Report Posted August 27, 2015 I made four of these and build quality was pretty good I must say. However my staining ability sucks. I'm in the middle of trying to strip & sand these things to start over. ugh! Quote
Nordraw Posted August 28, 2015 Report Posted August 28, 2015 The old Harbor Freight pin nailer in action I see. Nice job. Quote
LastOfTheVee8s Posted August 28, 2015 Author Report Posted August 28, 2015 The pin nailer did nicely. This one says it can handle up to a 7/8 inch nail. It fits a whole inch nail and seems to operate fine with it. Not sure why they say 7/8. Quote
LastOfTheVee8s Posted September 12, 2015 Author Report Posted September 12, 2015 Installed a few of these 1 Quote
jbw55 Posted September 12, 2015 Report Posted September 12, 2015 Installed a few of theseimage.jpgimage.jpgThat turned out nice!.....now you need to work on the popcorn Quote
jrsalas Posted September 12, 2015 Report Posted September 12, 2015 Installed a few of theseimage.jpgimage.jpgLooks better than i anticipated. Thanks for the updateSent from my VS985 4G using Tapatalk Quote
WigWagWorkshop Posted September 13, 2015 Report Posted September 13, 2015 I agree, incredible craftsmanship! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.