BLRWI Posted December 6, 2016 Report Share Posted December 6, 2016 5 hours ago, JimboS1ice said: Thanks@blrwi Sent from my iPhone using Tapatalk It's a win a win Jimbo. It offset my Fuel miter purchase that I certainly didn't "need" 1 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted December 6, 2016 Report Share Posted December 6, 2016 8 hours ago, Nordraw said: I saw these at Lowes on Sunday and picked them up. Fit right into one of my storage cabinets shelves. Seem like pretty good quality for the price. Like that they came with a foam organizer that has them all labeled. Make sure you check the alignment of the shafts to the handle, two of mine were misaligned...others reported several, some had none that were misaligned. 2 Quote Link to comment Share on other sites More sharing options...
comp56 Posted December 6, 2016 Report Share Posted December 6, 2016 why the need for such an expensive mask? I have a cheap ass solar model and works just fine... 2 Quote Link to comment Share on other sites More sharing options...
NicolasRamos Posted December 6, 2016 Report Share Posted December 6, 2016 Carhartt counts as tools right?... right? I went to Home Depot a few times this week. Sent from my iPhone using Tapatalk Pro 5 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted December 6, 2016 Report Share Posted December 6, 2016 Received my cyber Monday Felo order: 5 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted December 6, 2016 Report Share Posted December 6, 2016 17 hours ago, NicolasRamos said: Carhartt counts as tools right? ... right? I went to Home Depot a few times this week. Sent from my iPhone using Tapatalk Pro Oh yeah they do!! Jewelry box??!! Oh wait, no its not, even better! .. .. Deal of the day, about time I got myself a nice smaller set of torx keys... 5 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted December 6, 2016 Report Share Posted December 6, 2016 Bunch of RZ mask items... .. Plus the surprise item if you buy over $100 of product from them!! lol!! .. 5 Quote Link to comment Share on other sites More sharing options...
wildroamer Posted December 7, 2016 Report Share Posted December 7, 2016 Couldn't pass up the Acme 20% off. A bit intimidating, having never gone the spray finish route before. But I figure it's not rocket surgery, hehe. It's tiny! 7 Quote Link to comment Share on other sites More sharing options...
Conductor562 Posted December 7, 2016 Report Share Posted December 7, 2016 22 hours ago, comp56 said: why the need for such an expensive mask? I have a cheap ass solar model and works just fine... Yea, it's cool and all, but come on man, Venom is the shit! 2 Quote Link to comment Share on other sites More sharing options...
Conductor562 Posted December 7, 2016 Report Share Posted December 7, 2016 3 hours ago, wildroamer said: Couldn't pass up the Acme 20% off. A bit intimidating, having never gone the spray finish route before. But I figure it's not rocket surgery, hehe. It's tiny! Thats a pretty sweet setup! 2 Quote Link to comment Share on other sites More sharing options...
Conductor562 Posted December 7, 2016 Report Share Posted December 7, 2016 My table saw stand came today. I can't tell you have happy I am to get this thing on a proper stand. Garage is kinda messy right now, but it's just going to have to stay that way until after Christmas Got the 780 all set up too. It's really trying to become my favorite tool. I'd keep it in the living room if Mrs. Conductor would let me ? 6 Quote Link to comment Share on other sites More sharing options...
NicolasRamos Posted December 7, 2016 Report Share Posted December 7, 2016 Bunch of RZ mask items... .. Plus the surprise item if you buy over $100 of product from them!! lol!! .. That sweet ass visor though! Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted December 7, 2016 Report Share Posted December 7, 2016 5 minutes ago, Conductor562 said: My table saw stand came today. I can't tell you have happy I am to get this thing on a proper stand. Garage is kinda messy right now, but it's just going to have to stay that way until after Christmas Got the 780 all set up too. It's really trying to become my favorite tool. I'd keep it in the living room if Mrs. Conductor would let me ? They do look quite lovely as a nice centerpiece haha 2 Quote Link to comment Share on other sites More sharing options...
NicolasRamos Posted December 7, 2016 Report Share Posted December 7, 2016 Well this showed up today! My 2703 is experiencing some intermittent power loss. Already checked the battery's. it's the actual drill. And my old 2602 snapped the it's chuck screw last week. I'll send the two off on Thursday. Sent from my iPhone using Tapatalk Pro 4 Quote Link to comment Share on other sites More sharing options...
NicolasRamos Posted December 7, 2016 Report Share Posted December 7, 2016 They do look quite lovely as a nice centerpiece hahaJust drop the blade and pull the fence on that table saw! Maybe add a glass top...Sent from my iPhone using Tapatalk Pro 2 Quote Link to comment Share on other sites More sharing options...
CATERPILLAR Posted December 7, 2016 Report Share Posted December 7, 2016 1 minute ago, NicolasRamos said: Well this showed up today! My 2703 is experiencing some intermittent power loss. Already checked the battery's. it's the actual drill. And my old 2602 snapped the it's chuck screw last week. I'll send the two off on Thursday. Sent from my iPhone using Tapatalk Pro Very nice man have never heard of chuck screws 1 Quote Link to comment Share on other sites More sharing options...
Conductor562 Posted December 7, 2016 Report Share Posted December 7, 2016 2 minutes ago, KnarlyCarl said: They do look quite lovely as a nice centerpiece haha Lot more yellow in my life here lately. I guess the tool world is just too big to have just one color. Thats a 744 Type 1 saw. It's at least 15 years old and still cuts like a champ. The blade height crank is pretty still and needs a good clean and lube, but I definitely can't complain. I don't even want to venture a guess how many boards we've ripped with that saw. 1 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted December 7, 2016 Report Share Posted December 7, 2016 3 minutes ago, NicolasRamos said: Well this showed up today! My 2703 is experiencing some intermittent power loss. Already checked the battery's. it's the actual drill. And my old 2602 snapped the it's chuck screw last week. I'll send the two off on Thursday. Sent from my iPhone using Tapatalk Pro 1 minute ago, CATERPILLAR said: Very nice man have never heard of chuck screws Bolt that holds the chuck to the shaft... That's ridiculous though, guy at work has a 2602 i think and his broke, too. Hope you get worthwhile use from the OneKey set 1 Quote Link to comment Share on other sites More sharing options...
CATERPILLAR Posted December 7, 2016 Report Share Posted December 7, 2016 1 minute ago, KnarlyCarl said: Bolt that holds the chuck to the shaft... That's ridiculous though, guy at work has a 2602 i think and his broke, too. Hope you get worthwhile use from the OneKey set No no lol i meant i have never heard of them breaking lol 2 Quote Link to comment Share on other sites More sharing options...
Conductor562 Posted December 7, 2016 Report Share Posted December 7, 2016 16 minutes ago, NicolasRamos said: Well this showed up today! My 2703 is experiencing some intermittent power loss. Already checked the battery's. it's the actual drill. And my old 2602 snapped the it's chuck screw last week. I'll send the two off on Thursday. Sent from my iPhone using Tapatalk Pro Thats weird, my 2602 almost lost it's chuck screw running a 1-1/4" spade bit through landscaping timbers. It started getting rough. I re-tightened the bit and it still did it. Once I figured out what it was, I put it back in with blue loctite and haven't had an issue since, but there's no doubt in my mind it would have snapped if I hadn't noticed it quickly. 1 Quote Link to comment Share on other sites More sharing options...
NicolasRamos Posted December 7, 2016 Report Share Posted December 7, 2016 Bolt that holds the chuck to the shaft... That's ridiculous though, guy at work has a 2602 i think and his broke, too. Hope you get worthwhile use from the OneKey setYeah the bolt that's what I meant! Man this is literally the third time this has happened on this same 2602 drill! I might give it to my helper as soon as it comes back! I wasn't planning on buying a onekey set actually. I was going to buy the surge with the two 2.0's. I missed the Black Friday deal to get a free tool with this kit, on account of running out of spending coin last week. Still $375 wasn't bad. And I needed a drill after the other two took a crap last week. The gen1 fuel still technically works, it's just a bear to use right now. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
NicolasRamos Posted December 7, 2016 Report Share Posted December 7, 2016 Thats weird, my 2602 almost lost it's chuck screw running a 1-1/4" spade bit through landscaping timbers. It started getting rough. I re-tightened the bit and it still did it. Once I figured out what it was, I put it back in with blue loctite and haven't had an issue since, but there's no doubt in my mind it would have snapped if I hadn't noticed it quickly.Strangely enough, my father broke the chuck bolt of his 2703 on Saturday! He was using a 7" long 7/8"Bosch daredevil auger through a couple 2x6's and hit a gnarly knot I guess. So between the two of us we have 3 out of commission m18 hammer/drivers Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted December 7, 2016 Report Share Posted December 7, 2016 I found it, it was a 2602, this was from July . . 1 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted December 7, 2016 Report Share Posted December 7, 2016 58 minutes ago, Conductor562 said: My table saw stand came today. I can't tell you have happy I am to get this thing on a proper stand. Garage is kinda messy right now, but it's just going to have to stay that way until after Christmas Got the 780 all set up too. It's really trying to become my favorite tool. I'd keep it in the living room if Mrs. Conductor would let me ? You just saved your back with these 2 bro I have the same set ups and am very happy with them, the mitersaw with the stand is a lil on the heavy side but It makes life is so much easier transferring and storing the 780 beast 2 Quote Link to comment Share on other sites More sharing options...
Nordraw Posted December 7, 2016 Report Share Posted December 7, 2016 On 12/5/2016 at 8:32 PM, BMack37 said: Make sure you check the alignment of the shafts to the handle, two of mine were misaligned...others reported several, some had none that were misaligned. I'll do that. I didn't really pay attention to that, That could be a deal killer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.