Jump to content

20% off tools at Sears


BMack37

Recommended Posts

Wiha 6 piece insulated screwdrivers for $28 with coupon: http://www.sears.com/wiha-6-pc-screwdriver-set-insulated/p-00973626000P?sellerId=SEARS&prdNo=1&blockNo=1&blockType=G1

 

10" Knipex pliers wrench for $36 with coupon: http://www.sears.com/knipex-10-in-plier-wrench/p-00929112000P?sellerId=SEARS&prdNo=3&blockNo=3&blockType=G3

 

7 1/4" Knipex Alligator is $18 with coupon: http://www.sears.com/knipex-7-1-4-in-alligator-pliers/p-00929113000P?sellerId=SEARS&prdNo=14&blockNo=14&blockType=G14#

 

6 1/4" Knipex Cable sheer is $18 with coupon: http://www.sears.com/knipex-6-1-4-in-cable-shears/p-00929108000P

 

8" knipex mini bolt cutter is $32 with coupon: http://www.sears.com/knipex-8-in-lever-action-mini-bolt-cutter/p-00929109000P

 

Craftsman 41 piece screwdriver set is $37 with coupon: http://www.sears.com/craftsman-41-pc-screwdriver-set/p-00931798000P

 

There are others but you have to look, seems like hot buys and clearance doesn't save either. Craftman lead kit didn't work, Fluke meters didn't work.

 

Gearwrench 20-piece combination set didn't work but it is at $45, which is tied with the cheapest I've seen the set before. http://www.sears.com/gearwrench-20pc-combination-ratcheting-wrench-set-sae-mm/p-00935720000P?sid=IAx20050830x000545&aff=Y&PID=1225267&AID=11034749

 

Gearwrench 120XP ratchets also didn't qualify but right now are lower than Amazon

120XP 1/4" ratchet is $18.50, Amazon is $25

http://www.sears.com/gearwrench-1-4inch-drive-120xp-full-polish-teardrop-ratchet/p-00938453000P?prdNo=15&blockNo=15&blockType=G15

 

120XP 3/8 ratchet is $36.50, Amazon is $44.50

http://www.sears.com/gearwrench-3-8inch-drive-120-tooth-full-polish-teardrop/p-00938454000P?prdNo=32&blockNo=32&blockType=G32

There is this eBay auction that is cheaper at $31, seems to have good feedback but just weird how low it is: http://www.ebay.com/itm/KD-Tools-Gearwrench-120XP-3-8-Drive-Full-Polish-Teardrop-Ratchet-Low-81211P-/191656514842?hash=item2c9f9e551a:g:b38AAOSwjVVVxXDr&item=191656514842&vxp=mtr

  • Like 1
Link to comment
Share on other sites

The cable sheer is really nice, I use mine all the time. I'll try to find some other good deals on the site but I was starting to go crosseyed adding things to the cart. Still need to check Channellock and Dewalt (accessories), I think they stock Dremel. Some of the other Gearwrench stuff might work and I didn't check any of the Craftsman other than the screwdrivers. I'm expecting the Craftsman adjustable wrench set to drop back down to $20 in price but the singles are already on sale if you're interested. Those adjustable wrenches are made in the USA.

 

If you're in the market for anything, make sure you check. If you enter the code once, it will apply to anything you add to the cart if it works on that item. So just see what the original price is versus the cart price.

  • Like 1
Link to comment
Share on other sites

Found less than I was hoping for but only put in about 30 mins searching this time.

 

Craftsman 2pc Adjustable pliers set 7" and 10" Knipex rebrand with worse finishing on newer sets, direct rebrands in you get an older set is $36 with coupon: http://www.sears.com/craftsman-2-pc-adjustable-pliers-set-7-in/p-00945433000P

 

Channellock tongue and groove plier set for $18 with coupon: http://www.sears.com/channellock-2-pc-pliers-set/p-00945443000P

Link to comment
Share on other sites

Hope more than just Jimbo jumped on this offer, Sears seemed to raise all their prices to the stratosphere last night. The Knipex 10" pliers wrench is up to $73!

 

Only the Gearwrench ratchets didn't appear to change in price. I also found the 1/4" 120XP on eBay for $18 BIN

Link to comment
Share on other sites

I'm still waiting for the 3-piece set to drop back to $20.

 

I don't really need the large ones but it was a good deal, that I forgot to post. Think it was the 10" and 12" set for $20 and the 15" for $20, right? They're made in the USA supposedly by Western Forge.

Link to comment
Share on other sites

52 minutes ago, 77Ford01 said:

Yes.....very impressed with the quality emoji108.png

DeWalt

 

It will take top notch quality to make me happy because my other adjustables are Channellock by Irega and those are the best I've ever used by far. I have a few made in the USA and a Diamond USA adjustable and they suck in comparison to the Spanish made Irega. These Craftsman do look nicer that the other USA adjustables with the higher res pics I've seen.

Link to comment
Share on other sites

  • Member Statistics

    17,316
    Total Members
    6,555
    Most Online
    JohnB
    Newest Member
    JohnB
    Joined
×
×
  • Create New...