dewaltking
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by dewaltking
-
-
I just bought a used kenmore. Everything works great, but it doesn't empty the water after it fill up. Any ideas
-
They don't make them like they use to
-
Dremel rocks. This looks pretty cool.
-
Hey Kate. Nice to have you here.
-
Depends upon what you paid for the drill. It might be something as the forward/reverse switch not making contact, to the motor. If you plan on chucking the tool, I would take it apart and see how it is built, just to give you an idea of the workings of a drill. Who knows, you might see the problem and fix it. But if your going to trhow it out anyways, who cares if you mess it up.
-
I have been using a Hilti drill for a couple years now. I had the same problem with some other manufactures. I work on a lot of old houses in the states and see a lot of plaster. Some of the "Professional" grades did not hold up well. I spent the extra money and went with a Hilti. They have a two year warrenty, repair cost limit and some other benefits. Its been about three years with no problems. I do blow out the gun after a heavy job. If the dust gets in these tools, it causes a heat built and burns out the tool rather quickly. Again it is more money, but worth every penny.
-
Both Dewalt and Porter Cable are great routers. Bosch and Makita make a good one too. Since you are not using it a lot, I would go with a refurbished model to save some money, since it will be sitting on a shelf. Use the extra savings and get some good bits.
-
Good choice. You will be happy down the road
-
The 1/2" will allow you to use more bits. Both guns have the same the amps and the weights are about the same. The 1/2" gives you more capacity and more option for different bits. A mjority of home owners only really need a 3/8" bit. Some examples where a 1/2" has worked for me, I ran a line from my RO system in the basement to my freezer upstairs and the hole was 1", so I did need a 1/2" chuck for that bit. Again there are only a few times you really need the 1/2". Balance is huge when using a drill and the 115 model will allow you more control.
-
Go with the dewalt 235. I like a bigger chuck in case you need the extra size. A 1/2" comes in handy for so many things. Don't worry about not having a case. I just bought a contractor bag
-
I agree with oldman Simpson. For the price how can you pass it up, you might need it down the road. With a stand it's a great price especially if it is new
-
That is what is great about SDS bits, you don't get this problem. You might just need a new chuck which is cheap and easy to install. After a lot of use and especially when a bit spins in the chuck, it tends to mess up the chuck or wear it down.
-
Dremel is one of the best around. Great for a wide varity of applications.
-
Dremel is King. Very tough tool. I know you guys have this geared or the review is for the home owner and I know Dremel is marketing towards the homeowner, but this is professional grade.
How do you fit an elephant in the subway?
Take the l out of elephant and the f out of way in subway
-
I think a router or a rotary tool is your best bet. There are mini table saws or scroll saws that would work, but I can't picture what your trying to do, so its hard to say what would work best for you.
Kenmore washer problem
in Around The House
Posted
Sounds like a plan. I will take a look at it this weekend and let you know. Thanks for the advice.