Cheng Liu
-
Posts
144 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Cheng Liu
-
-
That SDS rotary hammer drill looks almost exactly like the original one. I had that and it was great, but I sold it when the new one came out because the original one (like this one) did not have a hammer only mode.
-
@Bremon Some decisions that companies make are nothing short of baffling to me. It's like how Ryobi has yet to re-release a cordless shop vac despite the obvious demand for one. That is proven by the fact that they made one many years ago. It wasn't particularly successful because the batteries of that time were not nearly as good as they are now. Now that vac, long discontinued and rare is fetching high prices on-line when one appears at all (since Ryobi tools of the past are still compatible with the newest Ryobi batteries). All they would need to do is take the Milwaukee one and change the housing from red and black to lime green and charcoal.
-
2
-
-
On 2/12/2017 at 8:28 AM, Bremon said:
It seems brand new designs and oddball stuff usually goes to the junk brands first to have kinks ironed out rather than have egg on the face of the premium brands a la 23gauge Makita pinner.
That may be true, but Ryobi has been making some of those "oddball" tools successfully for years and others still haven't. One example is the tire inflator. I have owned it for close to four years now, it has worked great every time I have used it and I really can't see any practical way to make it much better. Thus far, as far as I know; Ryobi is the only company that makes one.
-
2 hours ago, DR99 said:
Dewalt made 2 big errors they were the last to convert to slide packs, and didn't offer an adapter till years later. That pissed a lot of people off, and gave people an out to try a different brand. Also you had post TTI Milwaukee releasing all sorts of new tools and offering promotions all the time with them. Milwaukee is still aggressive with promotions but they are not as good and prices have went up.
I believe that title belongs to Ryobi who has yet to convert to slide packs (for their 18v tools at least).
-
2
-
-
Just to add insult to injury, although I guess this makes some sense since Ryobi and Ridgid are owned by the same parent company (TTI). I wonder if Milwaukee (also owned by TTI) will eventually come out with one as well.
-
On 2/6/2017 at 2:14 PM, Jronman said:
looks like it has a metal chuck. I wonder if Ryobi is trying to become a pro brand?
Their hammer-drill has had a metal chuck at least since the previous generation. I would know because I own that one.
-
On 2/5/2017 at 9:16 AM, Rammstein2609 said:
ETA is Q3 2017 for EU and ANZ.
I haven't heard of these making it into the US yet as they rejected 2.5ah and 5.0ah in 2015.
I can see why they rejected the 2.5 and 5.0 ah batteries since those were barely better than what was already available, but these are a major step up from that. If these don't make it to America in a timely manner, I will not be a happy camper.
-
On 10/22/2016 at 9:54 AM, JimboS1ice said:
Surprised we haven't seen something like this earlier
Sent from my iPhone using TapatalkI know what you mean, competitors like Greenworks, Ryobi and Echo have had something like that for years. That was the main reason I went with Ryobi 40v over Ego.
-
Ryobi has come out with a hybrid (meaning it run on mains power or battery) transfer pump. This seems like an interesting device and I can imagine many people finding it useful. I just hope that this is a sign that they will release a hybrid shop vac one day soon, since this isn't all that different from one. This is the link to it on the Home Depot website.
-
3
-
-
Ryobi has announced an updated spot light. This is the product page for it. Unlike the current version, this one used LEDs and it looks enticing to me especially for the price pictured and if you consider that the similar Dewalt one is half as bright and nearly twice as much.
-
The only problem I would have with such a saw is the unusual and non standard 5 3/8" blade. I imagine that blades of that size are going to be rare and the variety limited.
-
That's one thing I like about Ryobi, they make tools like this that other more well known companies don't.
-
23 hours ago, JerryNY said:
Yeah no doubt it would be nice but not quite as simple to do as on Dewalt's flexvolt. They made it 120v for a reason. In theory you could make an adapter for any cordless tool but I think Dewalt made the Flexvolt a 2x60v = 120 setup so it essentially is a custom add on for the saw and the saw only, they don't want you getting any ideas to try to use it on any other tools, and eliminates inefficiencies etc. If Milwaukee, or any other cordless tool maker for that matter, wants to they can make a converter that simply clicks into the tools battery slot. The problem is companies make so much on the batteries hey don't want to. The flexvolt miter could hurt battery sales for dewalt but then again they will make up for it because those that want to will have to buy two packs at a time to use it cordlessly...
Who said anything about a converter? Could they not just make a male plug that you can plug the female end of an extension cord into? The picture below shows what I mean on the Ryobi worklight. The left is where you can plug in the female end of an extension cord and the right hole is where the battery goes. I imagine they place the holes next to each other so that only one can be plugged in at a time.
-
Ryobi is finally releasing a brushless hammer drill. When more info is available on it and when I am healthier financially, I am definitely getting this. My current Ryobi hammer drill is now for sale. I hope this means that they will be releasing the brushless impact driver in the U.S. as well. This is the link for it.
-
2
-
-
22 hours ago, JerryNY said:
All very true but then why not just buy the corded Dewalt saw and forgo the flexvolt altogether? The Flexvolt Miter requires two expensive limited lifespan batteries to work off the cord so you might as well save money. In the end the Fuel and Flexvolt are in different classes. The Fuel is smaller lighter 10" which prob is better if you need a portable miter to work, maybe up a ladder, off battery exclusively all day on one battery that probably can handle 98% of the jobs you'd need a miter saw for. The Flexvolt is a full sized saw that offers flexibility to be on battery or mains but you get a heavier more bulky saw, but it's worth it if you need the full sized for sure. It all depends on what you need.
All I'm saying is that it would have been nice if Milwaukee had made their miter saw hybrid as well. I can't imagine it would add that much more bulk to it. That way you don't need a separate corded and cordless miter saw.
-
On 10/17/2016 at 10:30 PM, JerryNY said:
Sure having the corded option is nice but how much differnce will it be having two 9 amp batteries rotating off the quick charger in reality? I can't think of any usage scenario where you would run out of juice on the 9Ah battery before the second one was charged on the quick charger. If you have that much miter saw work planned you probably aren't looking at a portable battery powered miter saw solution anyway and neither the flexvolt or the fuel miter makes much sense.
Unlike the flexvolt though you can also use any of the older m18 batteries you already have on hand if you'd like. That and you only need one battery, unlike the flexvolt.
The main difference is that you would not have to use the battery when you don't need to. All batteries have a limited number of charges before they fail, therefore the less you use them; the longer they will last which is good considering how expensive they are.
-
The one feature that this saw is missing imo is a corded option. It would have been amazing if they had made this hybrid so that you could not use the battery when you are in a place where power is available. That is one thing I hope that Ryobi (since I use Ryobi tools) does if they ever release a cordless 10+" miter saw.
-
1
-
-
It's kind of funny because Ryobi (which is owned by TTI, the same company that owns Milwaukee tools) have had tri-beam LEDs on their impact drivers and wrenches for a long time now.
-
I have it. I have only used it a few times to remove/screw in lug nuts on a car tire and it worked perfectly.
-
On 8/23/2016 at 6:04 PM, JimboS1ice said:
Ryobi does different stuff over seas than here they've had brushless down under for a while but we haven't seen that yet
That is not all true. They have some brushless 40v OPE here, I have the brushless chainsaw and it works great. They have a brushless lawnmower as well, but I do not own it.
-
Yeah, the brushless drill is another tool I would love to have. That and the 40v blower/vac.
-
Great review. I am tempted to get this, but I think I will wait until they bring this to America. It is exactly what you reviewed, but is dual powered so can use a battery of mains power. Since it already exists (and has for some time) in Australia and Europe, I feel like it's only a matter of time before they bring it to the U.S.
-
So are they replacing the 40v OPE then?
-
It will depend on what kind of wood you are cutting, but my Ryobi 6 1/2" was able to go half the day with a 4 mAh battery and the power level was still at half.
More new One+ toys from Ryobi
in Ryobi
Posted
I can see some demand for some of these tools, but nothing I'm too excited for. Call me back when they release a cordless shop vac or framing nailer. I am still waiting for official confirmation on the 3.0, 6.0 and 9.0 A/hr battery packs that are supposed to be coming out.