Tools & Stuff
-
Posts
232 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Tools & Stuff
-
-
I have had every Makita 40v tool available here for 2 months now and the best improvements from the previous 18v and 36v models are the 5" angle grinder which has heaps more grunt. And the hammer drill / combi drill which has more grunt and an electronic clutch system which gives the tool a lot more functionality.
I have done reviews of 6 40v tools on my YT channel.
-
1
-
-
Took me a while but it is finally done. My home made relaxation tool.
-
2
-
1
-
-
The blades are on different sides of the tool, the 660 is more compact, the 660 has a blower, the 680 is tougher built. I would buy based on which side you want the blade on.
-
If you value all the things you say in the last line of your post then you want the xtd16. Simple. You won't regret it.
-
Bloody hell! I just got my first flexvolt battery. First time I charged it the charger got so hot I could barely touch it. Instantly made me a bit wary.
-
Don't need it in this part of the world BUT that plow looks really cool!
-
The Planer is here!
Biggest changes:
3mm cut depth, brushed was only 2mm
25mm rebate, brushed was 9mm
dual port dust extraction
AWS
Batt gauge
Torque control
Quite a lot of changes!
My review:
-
3
-
-
Christmas/New Year present to myself.
Runs pretty sweet.
Cuts 3mm, old brushed version does 2mm
And this new one has a 25mm (1") rebate, super handy and one of the main reasons I got it.
Not available in the states yet, but shouldn't be long I guess.
I have done a review on my channel for those interested.
Happy New Year!
-
1
-
-
In this part of the world the correct blades would be B-56823 (thin kerf) or B-15540
But basically any blade with lots of teeth as you say. I use 60-100 teeth on my mitre saw when cutting Ali. When cutting ACM (0.4mm ali both sides of 3mm plastic) with a circular saw and a 48 tooth wood blade it cuts fine, just don't push too quick.
-
This will be the next Makita Driver I buy... although I might wait a while to see how they perform with others.
-
When I saw Makita "4 in 1 drill" I thought "Oh No!" Thinking Makita had released one of those awful multi headed drills that becomes a jigsaw, sander, recip saw etc, like Black and Decker, AEG, Ridgid that are always shit.
-
Brilliant!
I often drill with my impact driver and it would be good to turn the impacts off, yet have the speed of an impact for drilling, and it looks like this tool offers just that. I would probably not use it for masonary drilling as it will involve getting new drill bits with the 1/4"shafts that still won't stand up to a rotary hammer.
I certainly like the direction they are going with this.
-
On 5/1/2018 at 8:07 AM, kornomaniac said:
That's most likely because you drained em and they were too hot.
Every decent charger ( of every brand ) first cools down the cells to a reasonable temperate to charge em. Charging too heated cells causes premature wear.
If you charge cool batteries that's the only time advertised charge times will be correct.
But in the real world on a jobsite you use the tool and chuck the battery straight on the charger when it dies. The cooling light never came on. I tested all my batteries the same way and only the 3ah came in close to Makitas stated time. I filmed it for a vid I will have up on YT soon.
-
Hi Guys, I entered a comp about Makita Efficut blades and would really appreciate a thumbs up on FB if you can find the time. Click the FB symbol bootom rigth of screen to give me a thumbs up and watch the short 1 min review. Thanks in advance.
-
On 4/30/2018 at 7:24 AM, Jronman said:
Makita has one of the faster charge times. a 5.0 in 45 minutes isn't too bad. A few minutes faster than my flexvolt charger.
Not in reality. I did a test the other day. I drained a 3, 4, 5 and 6 ah battery the other day and the 5 took 30 minutes longer than that. Only the 3 managed to come in at the advertised time. All others were way off.
-
The most unnecessary tool Makita make
-
Does the official Makita one have the star symbol on it?
-
I think brand does matter as different batteries have different protection measures and ways of 'not charging'.
-
There is (or at least was) a brand of tools available here thats range of tools came with both batteries and power supply.
-
I love my Makita metal cutter, but I too don't see the point in the clear plastic bit. Stuffed within moments of using it.
-
9 hours ago, Makita_2233 said:
Framer is still getting worked on. Next year apparently
Really? Still that far away? I went to a Makita expo in June last year and they said they were hoping to have it at the expo but should be out before xmas, now possibly next year? Come on Makita, if you are too late with this one the other tool companies will eat you up. That said, I don't want them to rush it and stuff it up.
-
1
-
-
Sharpening experiment for the blade on my Makita Metal cutting circ saw... and it worked!
-
2
-
-
Mitre saws always need tweaking from time to time to keep everything straight and true, and you should always check all these things and set them up right with any tool when you first get them.
-
1
-
-
This one has a tool less shoe and is compared to an 18v brushed Hitachi, but no run time test.
NEW 18v/40v First fix framing gun anytime soon?
in Makita
Posted
Been waiting 5 years for this and have had all sorts of fibs from Makita about a cordless framer.
I have seen patents for a fly-wheel type design similar to DeWalt. I would rather see a nailer along the lines of Milwaukee and HiKoki as I prefer that design overall.