-
Posts
598 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Posts posted by NicolasRamos
-
-
I've always written my initials where the battery slides into the tool. On the batteries I used to just blue Sharpie my initials onto them. I recently borrowed a friends methods of marking the vent holes with paint pen. You can easily ID them from the side.
Sent from my iPhone using Tapatalk Pro -
Thats weird, my 2602 almost lost it's chuck screw running a 1-1/4" spade bit through landscaping timbers. It started getting rough. I re-tightened the bit and it still did it. Once I figured out what it was, I put it back in with blue loctite and haven't had an issue since, but there's no doubt in my mind it would have snapped if I hadn't noticed it quickly.
Strangely enough, my father broke the chuck bolt of his 2703 on Saturday! He was using a 7" long 7/8"Bosch daredevil auger through a couple 2x6's and hit a gnarly knot I guess. So between the two of us we have 3 out of commission m18 hammer/drivers
Sent from my iPhone using Tapatalk Pro -
Bolt that holds the chuck to the shaft...
That's ridiculous though, guy at work has a 2602 i think and his broke, too.
Hope you get worthwhile use from the OneKey set
Yeah the bolt that's what I meant!
Man this is literally the third time this has happened on this same 2602 drill! I might give it to my helper as soon as it comes back!
I wasn't planning on buying a onekey set actually. I was going to buy the surge with the two 2.0's. I missed the Black Friday deal to get a free tool with this kit, on account of running out of spending coin last week. Still $375 wasn't bad. And I needed a drill after the other two took a crap last week. The gen1 fuel still technically works, it's just a bear to use right now.
Sent from my iPhone using Tapatalk Pro -
They do look quite lovely as a nice centerpiece haha
Just drop the blade and pull the fence on that table saw! Maybe add a glass top...
Sent from my iPhone using Tapatalk Pro- 2
-
Well this showed up today! My 2703 is experiencing some intermittent power loss. Already checked the battery's. it's the actual drill. And my old 2602 snapped the it's chuck screw last week. I'll send the two off on Thursday.
Sent from my iPhone using Tapatalk Pro- 4
-
-
mfs?
Muzzafuzzas
Sent from my iPhone using Tapatalk Pro- 2
-
[emoji848]Dan and Eric do have the tools...
Sent from my iPhone using Tapatalk Pro
- 7
-
Carhartt counts as tools right?
... right?
I went to Home Depot a few times this week.
Sent from my iPhone using Tapatalk Pro- 5
-
bought this the other day for my new DCS388T2 recip. Also bought the DHS790AT2 miter saw. The storage case is quite nice.
I fight with my Lenox case way to much. I feel like I need to call a bear sometimes.
Sent from my iPhone using Tapatalk Pro- 1
-
Son of a bitch!!!
And here I though a $300 Kuerig was high society
No shit! Here I was wanting to upgrade to a $150 dollar Kuerig!
Sent from my iPhone using Tapatalk Pro- 1
-
This is why I frequent Lowes very infrequently shall I say....
Southwire hand tools are mediocre, for the price and availability, not bad, just don't expect real good quality. I myself won't buy them. I do, however like their meters, I have used one for about a year now, and more recently they sent me another one that is IP67 rated, seems pretty decent and I haven't had a problem with my current one. So I wouldn't overlook the meters, just the hand tools.
Also, @NicolasRamos did you say whether you recognized the meters from another brand..?
CEM meters/instruments
Sent from my iPhone using Tapatalk Pro- 1
-
So tiny!
Sent from my iPhone using Tapatalk
Hold me closer Tony Danza
Sent from my iPhone using Tapatalk Pro- 3
-
Milwaukee Fuel sawzall bare tool $110 shipped
milwaukee fuel 2741-21 finish nailer kit $230 shipped
dewalt flexvolt grinder kit $220 shipped
dewalt flexvolt sawzall kit $220 shipped
dewalt 20v framing gun kit $300 shipped
Wish I had known about this sooner. Dad dropped $400 on the framing nailer last week
Sent from my iPhone using Tapatalk Pro -
You have a keeper there. My wife is the same way she goes nuts in a tool store and gun store. She is always asking me do we have one of those? When I say no she tells me we need one. What more could a guy want?
[emoji7]
Sent from my iPhone using Tapatalk Pro- 1
-
-
Bought a two pack of 3.0's to go with the new brushless framing nailer today.
Sent from my iPhone using Tapatalk Pro- 7
-
I put my new 2731 to use the last few days on a new rough-in. Love the power. Blows the m12 fuel out of the water. Also love the rafter hook feature.
Sent from my iPhone using Tapatalk Pro -
Yes sir. That is me. I follow along with your posts too. I am Bricoleur_Design_Jax on IG.
I'm new on here but also recognized the post! Love your Mak pac systainer compressor setup! If I did some carpentry I'd definitely try that out.
Sent from my iPhone using Tapatalk Pro -
I love black Friday and the Saturday after. All the people are down town so I get the highway and back roads all to myself. Didn't see a single car on the roads when I did commodity deliveries this morning until about noon when people started to wake up.
Sounds like in your line of work it's even better! I like going into the open supply stores and not waiting forever cause every other contractor in town is still hungover.
Sent from my iPhone using Tapatalk Pro- 3
-
Sent from my iPhone using Tapatalk
Wow. I must have completely overlooked this! I purchased one blade at full price!
Sent from my iPhone using Tapatalk Pro- 1
-
Thanks guys! Carl I've been eyeing the mspector but just haven't pulled the trigger I've found it for around $120 used but I'm just being patient for now, I don't need it at the moment but I dooo want it though [emoji6]
Mine has saved Me a few times already. Still wish it was a little better quality, but for the money it's not bad. I would like to upgrade sometime to the M-Spector Flex with the pivoting scope.
Sent from my iPhone using Tapatalk Pro -
Not my picture:
You know I didn't even make it down that aisle. [emoji15] not sure if it would be the same price, but there was probably some other decent items marked down in there.
Sent from my iPhone using Tapatalk Pro -
I meant that it's just a new set, reasonably priced. Nothing ground breaking but Diablo is Diablo.
I bought this set last week. They are still good hole saws. I'll probably replace them with the carbide tipped counterparts as they need replacing.
Sent from my iPhone using Tapatalk Pro- 1
Big ass light bar
in Power Tools
Posted
Biggest one I've ever been a part of installing was 14'. I have a few videos on my IG of four recently installed 10 footers.
Sent from my iPhone using Tapatalk Pro