-
Posts
400 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Events
Posts posted by JakeDewalt
-
-
I’m no expert but you may need to replace the brushes.
Stick around someone will chime in with more knowledge than me.
Welcome to the forum
-
1
-
-
I was thinking liquid rubber spray cans and masking tape
-
TOWSON, MD (June 5, 2019) – DEWALT announces the XTREME Subcompact Series™ tools, a line of five compact and performance-packed brushless 12V MAX* tools. The new line offers powerful, ergonomic solutions for a variety of applications including electrical, drywall, remodeling, automotive, metalworking, woodworking, and masonry applications.
The new XTREME Subcompact Series™ tools from DEWALT include the Brushless 12V MAX* Drill/Driver, the Brushless 12V MAX* Impact Driver, the Brushless 12V MAX* Screwdriver, the Brushless 12V MAX* 3/8-inch Impact Wrench, and the Brushless 12V MAX* Hammerdrill. Specific details about each tool as well as a complete list of products is included below:
- The 12V MAX* Brushless Drill/Driver (DCD701) is optimized for use in small pilot holes and can handle up to a 1/2-inch spade bit. The tool is 5.97 inches long and 1.91 pounds (tool-only). It’s lightweight and fits in tight places. It offers up to 250 UWO (Units Watts Out), a variable speed trigger, and 2-speed transmission. A belt clip and a bright LED are included on the tool’s foot.
- The 12V MAX* Brushless Impact Driver (DCF801) works well with small fasteners and can handle up to a 1/4-inch lag bolt. The tool is 5.05 inches long and 1.75 pounds (tool only). It achieves up to 1,450 in-lbs. of max torque, making it a powerful, subcompact choice. The impact driver features 3 modes: High Speed, Low Speed, and Precision Drive™ Mode. Precision Drive™ Mode can pause the Impact Driver for one second before impacting. This protects the fastener and material surface, providing users with control during applications that require a high level of precision. The tool includes three LEDs on the nosecone, a variable speed trigger, and a belt clip.
- The 12V MAX* Brushless Screwdriver (DCF601) is best used with hard-to-reach fasteners that need the control of its 15-setting clutch. The tool is 4.81-inches long, 1.5 pounds (tool only), yet is capable of up to 200 UWO of power. It features a belt clip and three LEDs on the nosecone.
- The 12V MAX* 3/8-inch Brushless Impact Wrench (DCF902) with a Hog Ring Anvil is designed for hard-to-reach nuts and bolts. The tool is 5.11 inches long and 1.73 pounds (tool only), achieving up to 1,500 in-lbs. of max fastening torque and 2,400 in-lbs. of breakaway torque. It features a variable speed trigger and has 3 modes: High Speed, Low Speed, and Precision Wrench™ Mode. The Precision Wrench™ Mode helps prevent overtightening and run-off. The Impact Wrench also features three LEDs on the nosecone to help illuminate work areas.
- The 12V MAX* Brushless Hammerdrill (DCD706) is optimized for creating variety of holes in brick and block, but can also tackle smaller holes in concrete. The tool is 6.6 inches long and 2.04 pounds (tool-only). It’s subcompact, lightweight, and fits in tight places. It offers up to 250 UWO, 25,500 BPM, a variable speed trigger, and a 2-speed transmission. A belt clip and LED are included on the tool’s foot.
In addition to the efficiency and performance offered by brushless technology in the XTREME Subcompact Series™ tools, the 12V MAX* lithium ion battery included with each tool kit now features a Fuel Gauge charge indicator. With a quick button press, three LEDs display remaining battery charge. The 12V MAX 2.0Ah Battery (DCB122) is included in kits, and the 12V MAX 3.0Ah Battery (DCB124) is available separately in single and double packs. DEWALT 12V MAX* Batteries with Fuel Gauge are compatible with prior DEWALT 12V MAX* tools and chargers and come with a 2-year limited warranty.
For professionals looking for capable, subcompact tools that perform tough applications in hard to reach spaces, the XTREME Subcompact Series™ tools are the ultimate choice. Available in summer 2019, each tool comes with a three-year limited warranty, one-year free service contract, and a 90-day money back guarantee.
-
2
-
-
-
Once you go to the 4 port even the single yellow chargers become obsolete
-
3
-
1
-
-
Big Pipe wrench and a vise get it loose and oil extremely well should be good to roll on
-
They have been great for me. Adding a 3rd rack in between my next jobs
-
1
-
-
9 hours ago, Babysaw said:
For the fellas that now own this tool:
can I cut windows out with it? Should I?
Thanks
I’d like to know the answer to this as well
-
1
-
-
Yes should cost you 99 bucks at the service center. 35 miles isn’t very far in my opinion
-
22 hours ago, midogrumpy said:
currently im 4 weeks in royal palm beach
what store ??
thx
mike
Northlake
-
Most commercial guys I see use the weed eater to do their edging and do it very fast. I may be wrong on this but I think edgers are less used then maybe they used to be and string trimmers are able to do the edgers job without haveing to switch tools or walk a mile back to their trailer
-
-
I never registered any of my tools 😿
-
I have to agree with @kanxrus on this. Also being an LED Diode it shouldn’t overheat in the first place
-
-
Is gun loaded correctly.?
-
Take it to dewalt service center should be cheap to rebuild
-
Have no problems with mine
-
Dewalt MobileLock is what I use. They have Cables as well
-
1
-
-
Fencing Staples. Livestock Fencing, Horse, residential, etc.
big ass staples you normally bang in with a hammer 1 at a time to hold the wire tight to the post
-
Very interesting. Collated Fencing staples 🤔
if they make a cordless post hole digger I may just start a fencing business
-
Ive never seen a fake that had the dewalt graphics on it. Always clearly marked differently
-
1
-
-
20 hours ago, Trim guy said:
I have the Dewalt's depth as shallow as possible, and the foot adjusted to the flooring. I don't think I'm pushing too hard on it; I'm used to rapid/sequential mode and a quick nailing pace.
That sucks what if you use a longer staple
tony hilton
in Dewalt
Posted
I know there are people here who have posted parts diagrams for Dewalt products.
Stick around someone will chime in with what your looking for Tony