-
Posts
345 -
Joined
-
Last visited
-
Days Won
18
Content Type
Profiles
Forums
Events
Posts posted by rcarnes911
-
-
That's awesome can't wait for all these new tools to dropNew entry for Flexvolt and Tstak. Source: toolsbydesign on Instagram
Sent from my Nexus 6 using Tapatalk
-
I bet we see price increases from lots of tool manufacturers soon the tariff's are going to increase the price
Sent from my Nexus 6 using Tapatalk -
Just a basic set up I don't have much room so I built a cheapo miter/table saw/work bench area still going to build some shelves for tools above the work benchYou should show it off. I'm sure it will look great.
Sent from my Nexus 6 using Tapatalk
- 2
-
That looks awesome, I am building a miter station in my little shop right now also, mine is just osb and 2x4's and the miter saw will fold down into the cabinet cheap and easy lol
Sent from my Nexus 6 using Tapatalk- 1
-
They still sell 40v Amazon has a 4.0 for 160 batteries are expensive
Sent from my Nexus 6 using Tapatalk -
It cuts very true, only thing I don't like about it is if you are working in the sun it can make it hard to get a shadowDoes the shadow line cut true?
Sent from my SM-N920V using Tapatalk
Sent from my Nexus 6 using Tapatalk
-
This is how mine looks lines up Right with the blade
Sent from my Nexus 6 using Tapatalk- 1
-
I have the flexvolt miter saw the shadow line for me is exactly where the blade will land and is the same thickness of the blade
Sent from my Nexus 6 using Tapatalk -
-
They sell the rollers for extra now got to get us anyway they canYeah that’s exactly why I bought mine but apparently the first gen had them and then the next two models didn’t. Not sure why. Mine are rounded with an attached flat piece but they don’t roll. Solid frame though, I like it a lot, just a couple of design issues I was not aware of
Sent from my Nexus 6 using Tapatalk
- 1
-
-
Nice that planer is so handyJust picked up a cordless Dewalt planer, the DCP580B. The motor has a noticeable increase in pitch switching between a 1.5 slim and a 60 volt. Really stoked!
Sent from my Nexus 6 using Tapatalk
-
Probably be better off just replacing the saw with something that has rack and pinion fenceCan I replace the fence on my kobalt table saw with something better?
Sent from my Nexus 6 using Tapatalk
-
It would cool to see a flexvolt router table and 20v compactHopefully if they’re really doing a cordless router it will be a Felxvolt design (and therefore less compact than the Makita), prompting Makita to release a larger cordless router of their own. I love the Makita compact but would also like it if they had a bigger model.
Sent from my Nexus 6 using Tapatalk
-
-
I usually use 5 or 6.0 batteries and have used 3.0 before without any problemsWell I went ahead and ordered a 570 but I was watching a youtube video review and a guy said he thinks his has killed some 5 amp hour batteries and thinks you shouldn't run anything under a 6.0. Has anyone else had an issue with the saw killing batteries or did this guy just have some bad luck.
Sent from my Nexus 6 using Tapatalk
-
I have had the 570 since it first came out, and it has been a great saw maybe the one he got does not work right. I have had none of the problems he listed as being wrong with it
Sent from my Nexus 6 using Tapatalk -
That's weird I got the 570 also mine did not come with the fancy rafter hook, but it does well for rough work and ripping plyHit the Wrong button.
We used the saw, today. I got some “hands on” time, as did everyone else.
Overall, it is worthless. No power. The old 6 1/2” have more power.
About 2:00, I heard, “ $&&$&&?£€>It jus doesn’t have any power. Complete waste of money.
Tomorrow, I will call Acme tool to see what their return policy is.
In a positive note, the bevel adjustments are very good. The switch and overall motor running, is good. The guard is great.
My opinion stay away from this saw.
Sent from my iPhone using Tapatalk
Sent from my Nexus 6 using Tapatalk
-
I have the same nails, it will fire maybe 3-4 before it jams. But with smooth nails it very rarely jams[mention=53824]rcarnes911[/mention]...I use paslode ace full head 2 3/8” ring shank every weekend when doing pt decks through 5/4 x 6 pt decking, those fire great ...you had a problem ? “Talk to me ,goose”...
Sent from my Nexus 6 using Tapatalk
-
I have had no problems with my 692 works great as long as you don't use ring shank nails
Sent from my Nexus 6 using Tapatalk -
DeWalt makes a versa tourqe screwgun for sheet metal I have the drywall version and it works great
Sent from my Nexus 6 using Tapatalk -
I had to open my big mouth about it working on my phone, it's not working for me either now tells me "network error please try again later sign_in / power tool forum" it happened when the terms and conditions update from tapatalk was pushed through
-
looks like it runs off 20v 110 and 12v dc, it has High pressure inflation mode with auto shut off as long as it is enough to do the truck and cars i will be happy
- 1
-
Probably I am running my old Nexus 6 with nitrogen os 8.1 AndroidWell you must be special!
Neither my iPhone X or Pixel 2 XL are working.
I have the latest version of Tapatalk on both.
What version of Tapatalk are you running? What version of Android? Details help.
Sent from my Nexus 6 using Tapatalk
Any thoughts on the new SBD Craftsman lineup?
in All others not listed
Posted
It looks like they have some cool stuff but I don't think i will get into Craftsman it is all geared towards the homeowner
Sent from my Nexus 6 using Tapatalk