Otero Posted October 25, 2019 Report Share Posted October 25, 2019 I have a new rear blade guard to replace the original (that broke from an item that I was cutting). See photo showing the new one in place. However, I am uncertain as to how it is supposed to fit/wedge on the left side next to the metal flanges on the housing. There is a hex-head bolt that is already threaded into the rear of the guard, with a spring and a small screw in the right side (hidden in the photo) that holds the guard in place and provides a hinge. I don't see any additional parts in the diagram from which I can order replacements. After the screw holding the bolt is tightened the guard is still quite wobbly on the left side, left to right and up and down. I can't seem to find just how to position it so that it slides down & up, and stays tight and in position, when the saw blade handle in moved down/up. Can someone with this model saw help me with this? thanks, Bob Quote Link to comment Share on other sites More sharing options...
Malsy Posted January 23, 2021 Report Share Posted January 23, 2021 I have the same problem was this issue ever resolved and how? Quote Link to comment Share on other sites More sharing options...
CNC 170 Posted January 29, 2022 Report Share Posted January 29, 2022 I am about to fit a new tool guard. I thougt hthere must be some way of load ing the spring. Emails to suppliers to the tool guard has nil response. did you solve the problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.