rrich1

Earlier this year I posted pics of my deck that my brother in law and I built. I then built a table, benches, and some Adirondack chairs. All between March and April. Here is a before pic and then one after the deck. After the deck I decided to tackle the landscaping. When we built the deck we pulled out and set aside over 1500 brick. Well to reuse the brick, I mortered it around the west, south, and east sides of the house. This took a few months as I did it all myself while working full time and dealing with the wife and two kids under 3. Having this been a first time doing this I hope it is the last time in my life that I do it! these were filled in just didn't have a pic of it.

Cool thanks. I always say no to the emailed receipts. I'll look into it. Sent from my XT1254 using Tapatalk

Currently invested in Bosch. If I were to switch it would be either Makita or Milwaukee. Milwaukee is basically available everywhere and Makita has outdoor equipment. I very happy with my Bosch and have no plans to switch.

gotya. time to scour the internets.

What coupons did you use? Sent from my XT1254 using Tapatalk

If you don't plan on moving the box you could always leave the castors off. Sent from my XT1254 using Tapatalk

Just an FYI, my store has the box for $700 and not the $800 listed online. If bought separate online it is only $750, not sure why there is such a variance on their own pricing. Sent from my XT1254 using Tapatalk

more and more companies are coming out with tool boxes so the normal Snap-On, Mac, and Matco boxes are getting a lot of competition. I'm sure Masterforce has been getting some of that market share. If they even said they were working on one you could always buy the bottom now and buy the top later, not ideal but could be an option. Who knows. Also I would like to get my hands on an International box and see how they compare to other brands. They look nice as well.

I'd happily drive 80 miles to save me $600 LOL. For sh!ts and giggles I'd contact Masterforce and see if they have a top for the 72" but not have it listed.

for the price of shipping that is a whole other tool box! What about a 72" box with a 56" top or even a 41" top and have the remaining space as work space? Masterforce also has a 56" top and bottom combo for 1,348. Do you have a Menards close being on the west coast?

I just looked them up. The Homak's look nice. But with the shipping cost added it makes it quite a bit more for the box than the Milwaukee or the Masterforce. If you went with a Masterforce box you could get one shipped to the store for free to save that cost. Also buy it during their 11% sale and get a rebate on top of it. I have some rebates coming and about to send off that if I went that route I would use them towards a box but also wait for their rebate sale again.

thanks for that as well. I already have shelving in my garage and if I got one it would go under them. This helps me out a lot. thanks!

I'm in the same boat. I am looking to get a new box and really like the Milwaukee one. Trying to decide if the drawer pattern fits all of my needs. I like the Masterforce ones from Menards but are more expensive.

I use streamlights on duty and love them. Sent from my XT1254 using Tapatalk

im looking at 2800-3100 psi units. Trying to keep my eye out on a good deal. I have ceder siding on the house. Will be used to clean cars, deck, wood deck furniture, driveway, etc.

My local Home Depot is getting them back in stock. The employee who was arguing to get them back because other stores had them stated they will be regular products now. Also mine has them at the $700 price. He stated they don't show on sale and should remain that price. They currently have a few tops in stock and am getting the bottoms in as well. Might get my hands on one by the end of the month for the big 30th bday.

Gotya. Menard's has their 11% rebate going on right now. I'm right be time to pick up a Masterforce router or delta table saw [emoji16] Sent from my XT1254 using Tapatalk

Masterforce are decent tools. No worse than kobaltSent from my XT1254 using Tapatalk

It's a Michael Durbin. 60" g10 pin, cocobolo forearm and butt with striped ebony handle. I had veneers made to mimic the thin blue line flag. Pics are not great. The figure in the wood is ridiculous. Glare from my light is killer. Glad to see another player whether current or not. [emoji1] Sent from my XT1254 using Tapatalk

I'm invested with Bosch otherwise it would have been makita. Sent from my XT1254 using Tapatalk

Very generous. Thanks! Sent from my XT1254 using Tapatalk

Bosch for me. Doesn't mean I don't buy other tool brand items. Sent from my XT1254 using Tapatalk

http://www.deckstainhelp.com Sent from my XT1254 using Tapatalk

Looks like the power washer is on hold for now. My custom pool cue is ready for pickup Sent from my XT1254 using Tapatalk

Fusion hands down. Sent from my XT1254 using Tapatalk