Oilpatch Posted January 19, 2016 Report Share Posted January 19, 2016 I'm currently in the process of swapping out the light switches in a house I recently moved into, the only problem is the 3 way light switches seem to be getting the better of me. I installed them the exact way they were installed on the old switch and I c can't get them to work right. Does anybody know of some rule of thumb for changing them out? Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted January 19, 2016 Report Share Posted January 19, 2016 Yes, but i'd have to show you in person, I love figuring these type of things out. We also need to know where the line and load are, on which side, so if the power is coming to one switch and the wire for light is feeding from the other switch, or if the power and wire to light are coming from the same box....? Definitely look up diagrams online Quote Link to comment Share on other sites More sharing options...
JerryNY Posted January 19, 2016 Report Share Posted January 19, 2016 Also it's it a not a bad idea do take photos of the switch's wiring before starting. Best advice I could give is look at diagram pictures online like Knarly mentions and get a good noncontact tester.Edit to say it's NOT a bad idea for photos. Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 Good luck buddy. I've never messed in the wiring department. Only building and putting things together. Wish I could get some time to learn some wireing. Millerz Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 19, 2016 Report Share Posted January 19, 2016 I've seen many people put the 3 way switches in upside down which will screw your whole circuit up.JimboSent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Peter Argyropoulos Posted January 19, 2016 Report Share Posted January 19, 2016 By code, there are certain color wires you're supposed to use for power in, travellers and load out, but it's rarely the way it gets done in the field. Adding to the complication is that many of the older three way switches didn't have a clearly marked "point" screw (the black screw on modern three-way switches) and figuring out which wire is point (feed in or load out) can be difficult without a tester. Once you identify the wires, it will all work, but you need to understand how the switches work to get to that point. Quote Link to comment Share on other sites More sharing options...
chadlanthier Posted January 19, 2016 Report Share Posted January 19, 2016 If I understand what your talking about, I had same problem. I had to buy a special switch, looked at original and order the same kind and was easy to install. Quote Link to comment Share on other sites More sharing options...
John Glassey Posted January 19, 2016 Report Share Posted January 19, 2016 Ah, brings back bad memories. I ran into this when I bought my current home. Was built in the real early 40s, so all the wiring was knob and tube. Without replacing the wiring at the time, but replacing the switch with an x10 3 way module, and NO color wires for reference. What a nightmare to wire, but I eventually got it lol. And as luck would have it, there was only 1- 3way switch from the ground floor the the upstairs hallway. Let me tell you what a apsolute pain in the butt to replace the wire without tearing walls open! this is a stock pic just for reference in case there are people out there that don't know what knob n tube is. Quote Link to comment Share on other sites More sharing options...
Oilpatch Posted January 20, 2016 Author Report Share Posted January 20, 2016 By code, there are certain color wires you're supposed to use for power in, travellers and load out, but it's rarely the way it gets done in the field. Adding to the complication is that many of the older three way switches didn't have a clearly marked "point" screw (the black screw on modern three-way switches) and figuring out which wire is point (feed in or load out) can be difficult without a tester. Once you identify the wires, it will all work, but you need to understand how the switches work to get to that point.what type of tester are you talking about? I have this one, would it work?:http://www.homedepot.com/p/Klein-Tools-Voltage-Tester-ET50/202498056 Quote Link to comment Share on other sites More sharing options...
mr.fletcher Posted January 31, 2016 Report Share Posted January 31, 2016 This is the only three way I don't enjoy discussing! Do you have any pictures you may be able to provide in order to help? Glasseyi, were you fishing in your new wires from the attic? Quote Link to comment Share on other sites More sharing options...
John Glassey Posted January 31, 2016 Report Share Posted January 31, 2016 This is the only three way I don't enjoy discussing! Do you have any pictures you may be able to provide in order to help? Glasseyi, were you fishing in your new wires from the attic?No attic to speak of, all wires had to come from the basement up the side walls, there is a space, luckily above the second floor that I could poke my head through and run a nylon poll fish over too, was about 15' too the wall switch, so that was even fun. Quote Link to comment Share on other sites More sharing options...
mr.fletcher Posted January 31, 2016 Report Share Posted January 31, 2016 No attic to speak of, all wires had to come from the basement up the side walls, there is a space, luckily above the second floor that I could poke my head through and run a nylon poll fish over too, was about 15' too the wall switch, so that was even fun. We get a lot of tricky fish locations, that sounds like it was a bit of a bear! Sometimes you gotta open up a location, even if you dont wanna! Quote Link to comment Share on other sites More sharing options...
John Glassey Posted January 31, 2016 Report Share Posted January 31, 2016 Yeah believe I wanted too, but old lath and plaster. Would have been ugly. John, Sent from my iPad using Tapatalk[emoji848] 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.