Cheng Liu Posted June 22, 2016 Report Share Posted June 22, 2016 What cordless tools do other brand(s) make that you wish yours did? Also what is one cordless tool that you are glad that your brand makes that others or most others do not? As a member of team lime green (Ryobi) I really wish they would make a cordless wet/dry shop vac like the one that Milwaukee has. Another one would be a framing nailer like the one Dewalt has, although I would prefer if they could make it 21 degrees rather than 34 degrees. One tool that Ryobi makes and no other brand (that I know of) makes that I love is the inflator. It has been very useful for me to do many things from inflating my tires, to inflating basketballs, footballs, soccer balls etc and the other side has been great for things like air mattresses. Quote Link to comment Share on other sites More sharing options...
D W Posted June 22, 2016 Report Share Posted June 22, 2016 Quite a few things but I would like to see Metabo or Bosch make a 180/360 degree lantern like Milwaukee and Makita. An inflator like Ryobi would be great too. Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted June 22, 2016 Report Share Posted June 22, 2016 Good call, that inflator is brilliant, I would love that for pumping up drain line test ball plugs for when pressure testing a system, as well as the pressure on the system itself. I may have to look into getting one anyways, despite my red preference. I do have the ryobi hybrid lights, love them, Milwaukee came out with something similar, but too late. I love that Milwaukee has a plethora of m12 tools, they are my most used cordless tools by a long shot. Sent from my XT1585 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
jswoger1986 Posted June 22, 2016 Report Share Posted June 22, 2016 I'm not sure of something that makita makes that others don't but I certainly wish they made a good Brad nailer and that they made finish and framing nailers at all Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted June 22, 2016 Report Share Posted June 22, 2016 I'm not sure of something that makita makes that others don't but I certainly wish they made a good Brad nailer and that they made finish and framing nailers at all Sent from my iPhone using Tapatalk They have a brad nailer but I've heard it's junk Jimbo Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Shuutr Posted June 22, 2016 Report Share Posted June 22, 2016 I would like a Bosch 12v rotary tool and a brushless impact driver ( I know that second one exists but I'm not buying on eBay from Korea.) I want a Ridgid powerboxx (radio that charges batteries when it is plugged in). Quote Link to comment Share on other sites More sharing options...
sparky603 Posted June 22, 2016 Report Share Posted June 22, 2016 I can't really think of one cordless item that Milwaukee doesn't have that others do, and that I really need professionally. If I were a carpenter, then perhaps, but they are starting to address a lot of that, too. There's a lot of things they do make that make me sure glad I didn't go another route when it was time to upgrade a few years back - I know for certain that I would want to do without my M18 Hole Hawg. Quote Link to comment Share on other sites More sharing options...
kornomaniac Posted June 22, 2016 Report Share Posted June 22, 2016 5 hours ago, JimboS1ice said: They have a brad nailer but I've heard it's junk Jimbo Sent from my iPad using Tapatalk JUNK Reaaal fucking junk 1 Quote Link to comment Share on other sites More sharing options...
DR99 Posted June 22, 2016 Report Share Posted June 22, 2016 13 hours ago, Cheng Liu said: What cordless tools do other brand(s) make that you wish yours did? Also what is one cordless tool that you are glad that your brand makes that others or most others do not? As a member of team lime green (Ryobi) I really wish they would make a cordless wet/dry shop vac like the one that Milwaukee has. Another one would be a framing nailer like the one Dewalt has, although I would prefer if they could make it 21 degrees rather than 34 degrees. One tool that Ryobi makes and no other brand (that I know of) makes that I love is the inflator. It has been very useful for me to do many things from inflating my tires, to inflating basketballs, footballs, soccer balls etc and the other side has been great for things like air mattresses. Ryobi did have a Canister Wet/Dry Vacuum I have one but it was discontinued and relatively rare. The performance wasn't that great as it was launched during the nicad Ryobi era. The Ryobi infatoris awesome I won't give up on Ryobi as a platform I own because of the weird tools like that Quote Link to comment Share on other sites More sharing options...
Grumpy MSG Posted June 23, 2016 Report Share Posted June 23, 2016 For you Milwaukee folks, I know my DeWALT DCE100 blower came with an adapter to use it as an inflater /deflater (depends which port you hook it to, I don't know what kind of pressure it develops and it won't work to inflate tires, but it will for air matresses, pool floats and low pressure balls. Does the Milwaukee equivalent come with one too? Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted June 23, 2016 Report Share Posted June 23, 2016 4 minutes ago, Grumpy MSG said: For you Milwaukee folks, I know my DeWALT DCE100 blower came with an adapter to use it as an inflater /deflater (depends which port you hook it to, I don't know what kind of pressure it develops and it won't work to inflate tires, but it will for air matresses, pool floats and low pressure balls. Does the Milwaukee equivalent come with one too? ryobi sells a cordless inflator tool for about 20 bucks. I don't think the blower could generate enough pressure for that type of inflation, its not an actual air pump Quote Link to comment Share on other sites More sharing options...
Grumpy MSG Posted June 23, 2016 Report Share Posted June 23, 2016 2 minutes ago, JimboS1ice said: ryobi sells a cordless inflator tool for about 20 bucks. I don't think the blower could generate enough pressure for that type of inflation, its not an actual air pump It must develop some, it uses a twist lock retention system to ensure it doesn't blow off due to restriction. If you told me it had a 5, 8 or 10 PSI capacity, I wouldn't be surprised. I think it's purpose is to avoid huffing and puffing while blowing something up with your lungs. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted June 23, 2016 Report Share Posted June 23, 2016 It must develop some, it uses a twist lock retention system to ensure it doesn't blow off due to restriction. If you told me it had a 5, 8 or 10 PSI capacity, I wouldn't be surprised. I think it's purpose is to avoid huffing and puffing while blowing something up with your lungs. I've used it in my air mattress and it works really nice but again there is less internal pressure than a tired Jimbo Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Grumpy MSG Posted June 23, 2016 Report Share Posted June 23, 2016 1 minute ago, JimboS1ice said: I've used it in my air mattress and it works really nice but again there is less internal pressure than a tired Jimbo Sent from my iPhone using Tapatalk I guess it could be called a HVLP inflator. It wouldn't take much for any of the brands to adapt a 12V vehicle power (used to be called a lighter) compressor to run off their 12 volt batteries. It'd be cheap and easy. As for cordless tools, I'd love a DeWALT 12V Max 18 gauge brad nailer and 23 gauge pinners. I would also like the 12V batteries to have the fuel gauges. I know you aren't suppose to store the batteries at full charge and I remain baffled as to how you are supposed to ensure it is at the right level. I know Milwaukee's line is a lot more popular and has a lot more tools available, but I like that the same charger works for both the 12 and 20 volt lines. 1 Quote Link to comment Share on other sites More sharing options...
Cheng Liu Posted June 23, 2016 Author Report Share Posted June 23, 2016 18 hours ago, JimboS1ice said: They have a brad nailer but I've heard it's junk Jimbo Sent from my iPad using Tapatalk I guess that's why he said a good brad nailer. 1 Quote Link to comment Share on other sites More sharing options...
Tools & Stuff Posted June 24, 2016 Report Share Posted June 24, 2016 On 22/06/2016 at 10:58 PM, jswoger1986 said: I'm not sure of something that makita makes that others don't but I certainly wish they made a good Brad nailer and that they made finish and framing nailers at all Sent from my iPhone using Tapatalk Makita do make Framing Nailers Quote Link to comment Share on other sites More sharing options...
jswoger1986 Posted June 24, 2016 Report Share Posted June 24, 2016 Makita do make Framing Nailers Sorry I meant to say cordless. I know they make pneumatic nailers I want to look into a few of them Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tools & Stuff Posted June 24, 2016 Report Share Posted June 24, 2016 9 hours ago, jswoger1986 said: Sorry I meant to say cordless. I know they make pneumatic nailers I want to look into a few of them Sent from my iPhone using Tapatalk They do make cordless (with gas) ones. http://www.makita.co.nz/products/model/GN900SE I wish they would make an 18v one like Dewalt do, if thats what you meant. Quote Link to comment Share on other sites More sharing options...
Cheng Liu Posted June 25, 2016 Author Report Share Posted June 25, 2016 On 6/22/2016 at 7:12 PM, JimboS1ice said: ryobi sells a cordless inflator tool for about 20 bucks. I don't think the blower could generate enough pressure for that type of inflation, its not an actual air pump Are you referring to this inflator? This one has two modes one (the side depicting a tire) is for high pressure lower volume things i.e. tires or basketballs, the other side (depicting an air mattress) is for lower pressure higher volume devices i.e. beach balls and air mattresses. It does cost $40 though although I would consider it worth it. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted June 25, 2016 Report Share Posted June 25, 2016 Are you referring to this inflator? This one has two modes one (the side depicting a tire) is for high pressure lower volume things i.e. tires or basketballs, the other side (depicting an air mattress) is for lower pressure higher volume devices i.e. beach balls and air mattresses. It does cost $40 though although I would consider it worth it. Jimbo Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Hugh Jass Posted June 25, 2016 Report Share Posted June 25, 2016 I also agree with the inflator. That is universal with all brands I believe since Ryobi is still the only one I believe. At this point there's not a lot out there missing between brands. Maybe the cordless box fan for Dewalt. 3 Quote Link to comment Share on other sites More sharing options...
Foneguy Posted June 25, 2016 Report Share Posted June 25, 2016 I'll second on the inflator ..... But I would really like to see a "yellow" 20v pvc cutter.. It just seems like I do a lot of irrigation work around the house Quote Link to comment Share on other sites More sharing options...
Cheng Liu Posted June 28, 2016 Author Report Share Posted June 28, 2016 On 6/25/2016 at 2:47 PM, JimboS1ice said: Jimbo Sent from my iPhone using Tapatalk Ah I see, I skipped that one since I already had the one I linked which is this one, but can do more, is bigger and more expensive. Quote Link to comment Share on other sites More sharing options...
MFDoom Posted July 13, 2016 Report Share Posted July 13, 2016 I'm impatiently waiting for a Brushless multi tool from Milwaukee Sent from my iPhone using Tapatalk 3 Quote Link to comment Share on other sites More sharing options...
AnonymousJoe Posted July 13, 2016 Report Share Posted July 13, 2016 Me too! So impatient I think I'm gonna buy the brushed version anyways! I have a few extra batteries from the recent promos I need something to put it on lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.