bradleyheathhays Posted August 3, 2023 Report Share Posted August 3, 2023 I need to make a series of completely flat sanding blocks and I've chosen to use 1/4" acrylic sheet for my backing. Previously when I Titebond 3 glued sandpaper to sheets of 1/8" acrylic they were all curled after the glue cured. So I've switched up to 1/4" acrylic and I'm searching for an appropriate glue that doesn't shrink. I would use rubber cement but the way that application works, apply to both sides, let dry and combine, would make for unwanted little lumps. I'll be using a brayer to make everything as even as possible after the paper is laid down on the glue surface. Any suggestions for a better glue? Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted August 3, 2023 Report Share Posted August 3, 2023 Good question. The two things I have been looking for over the years are a good glue with the qualities you are talking about and a great tape that doesn't leave glue behind and peels up easily but is strong enough where the corners don't curl up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.