torontotoolman Posted July 11, 2015 Report Share Posted July 11, 2015 I love my paslode il take it over any other gun maybe even pnuematic i love the power and reliability this gun gives Sent from my SGH-I337M using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bremon Posted July 11, 2015 Report Share Posted July 11, 2015 Yeah, instead you get additional noise, additional maintenance, tanks that rust, and hoses to trip on. Paslode in theory is the way to go, TO sings their praises for a reason I'm sure. Quote Link to comment Share on other sites More sharing options...
DR99 Posted July 11, 2015 Report Share Posted July 11, 2015 Is that the lithium Paslode nailer Toronto? Quote Link to comment Share on other sites More sharing options...
torontotoolman Posted July 11, 2015 Author Report Share Posted July 11, 2015 Is that the lithium Paslode nailer Toronto?Yes sir its a beast.so good Sent from my SGH-I337M using Tapatalk Quote Link to comment Share on other sites More sharing options...
torontotoolman Posted July 11, 2015 Author Report Share Posted July 11, 2015 Well air powered nailers still have their place as they are better then battery operated ones, and at least with conmpressors you dont have to spend 30 bucks for nails and charge. But at least from what I hear, Pasload can kick some serious booty on them projects where you need cordless but POWER HAHAHAHAHAHA I use pnuematic everyday at my job and i love the hitachi coil nailer but something about the paslode i love maybe because its my personal and i work i use my bosses guns but the paslode holds its on in the nailer department thatd for sure best cordless you can get in my opinion Sent from my SGH-I337M using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
BK13 Posted July 17, 2015 Report Share Posted July 17, 2015 I haven't really followed the nailer market. Are the cordless/horseless nailers basically just for framing or roofing? I would thing they'd be pretty bulky for finish nailers? Quote Link to comment Share on other sites More sharing options...
torontotoolman Posted July 17, 2015 Author Report Share Posted July 17, 2015 I haven't really followed the nailer market. Are the cordless/horseless nailers basically just for framing or roofing? I would thing they'd be pretty bulky for finish nailers?Theres different nailers there framing,roofing,finishing all different types and for each there is cordless and ones with hoses and compressors and they all take the specific nails for the trades thats using it and even with framing therr is coil framing nailers and stick framing nailers Sent from my SGH-I337M using Tapatalk Quote Link to comment Share on other sites More sharing options...
kruton Posted July 19, 2015 Report Share Posted July 19, 2015 How are the paslode pneumatic guns? I'm in the market for a 16 guage nailer. Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Poisonfangs85 Posted July 19, 2015 Report Share Posted July 19, 2015 How is the reliability Toronto? Had one years ago and it would malfunction constantly. I have to believe they worked all the bugs out by now. Quote Link to comment Share on other sites More sharing options...
torontotoolman Posted July 19, 2015 Author Report Share Posted July 19, 2015 How are the paslode pneumatic guns? I'm in the market for a 16 guage nailer. Sent from my SM-N900V using TapatalkI never used any of there finish nailerz but the pneumatic framing nailer is nice good weight and all around solid gunSent from my SGH-I337M using Tapatalk Quote Link to comment Share on other sites More sharing options...
kruton Posted July 19, 2015 Report Share Posted July 19, 2015 I haven't heard to many bad things about Paslode. I am between paslode and grex.Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
NERemodeling Posted July 20, 2015 Report Share Posted July 20, 2015 I haven't heard to many bad things about Paslode. I am between paslode and grex.Sent from my SM-N900V using TapatalkI've only used a paslode cordless 16ga and really like it. Cant speAK for theit pneumatic guns bUT they seem nice.. I haven't used them but hear grex makes some really nice guns also. For a different option, A carpenter buddy of mine uses Cadex guns and the few times I have used them on a job they have been super nice.. when my pneumatic bostitch finish guns go I will probably replace them with Cadex Quote Link to comment Share on other sites More sharing options...
kruton Posted July 20, 2015 Report Share Posted July 20, 2015 Yeah I am new to the world of pneumatic nailers so I am open to any suggestions. I habe seen the Cadex and thought about checking them out. For a DIY guy I'm thinking the 16 guage should be capable of doing everything I need too. Any thoughts there?Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Justin Hernandez Posted July 21, 2015 Report Share Posted July 21, 2015 I love my Paslode pneumatic framing nailer, I always wanted to get the cordless one but don't use a framing nailer much. Is only having one strip of nails a pain always reloading or you don't even notice it?? Quote Link to comment Share on other sites More sharing options...
Renner_construction Posted August 2, 2015 Report Share Posted August 2, 2015 Paslode pneumatic anything is the way to go! Their tools are solid, fast, reliable. I have a few of f350's, 1/2 crown stapler, 1" crown stapler, and the positive placement nailer. In Wisconsin and Illinois paslode definitely runs every jobsite I've seen. Quote Link to comment Share on other sites More sharing options...
Renner_construction Posted August 2, 2015 Report Share Posted August 2, 2015 ^ and for good reason Quote Link to comment Share on other sites More sharing options...
MikeyB Posted August 3, 2015 Report Share Posted August 3, 2015 I love my Paslode framer and angled finish nailer, have both of them for almost 14 years, great tools.. I also have a Porter Cable Pneumatic angled stick nailer wich is a Freaking Beast!!!!! I don't use them everyday but I love them alll.... Quote Link to comment Share on other sites More sharing options...
kruton Posted August 3, 2015 Report Share Posted August 3, 2015 I love my Paslode framer and angled finish nailer, have both of them for almost 14 years, great tools.. I also have a Porter Cable Pneumatic angled stick nailer wich is a Freaking Beast!!!!! I don't use them everyday but I love them alll....I'm looking at the paslode pneumatic 16 gauge finish nailers. Is it worth the extra money to get the angled gun over the straight? I am leaning toward the angled gun just since it should be able to get in a little tighter areas.Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Justin Hernandez Posted August 3, 2015 Report Share Posted August 3, 2015 I'm looking at the paslode pneumatic 16 gauge finish nailers. Is it worth the extra money to get the angled gun over the straight? I am leaning toward the angled gun just since it should be able to get in a little tighter areas.Sent from my SM-N900V using TapatalkGo angled if you can for that same reason getting into tight spots and if you ever do crown molding its a must. Paslode pneumatic anything is the way to go! Their tools are solid, fast, reliable. I have a few of f350's, 1/2 crown stapler, 1" crown stapler, and the positive placement nailer. In Wisconsin and Illinois paslode definitely runs every jobsite I've seen.I run a Paslode F350S had it for about 8 years and no problems, what nails are you using I use Paslode but there expensive but well worth it. Quote Link to comment Share on other sites More sharing options...
kruton Posted August 3, 2015 Report Share Posted August 3, 2015 Go angled if you can for that same reason getting into tight spots and if you ever do crown molding its a must. I run a Paslode F350S had it for about 8 years and no problems, what nails are you using I use Paslode but there expensive but well worth it. Crown molding will be the bulk of what I do so that pretty much answers my question. Thanks.Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Justin Hernandez Posted August 3, 2015 Report Share Posted August 3, 2015 Crown molding will be the bulk of what I do so that pretty much answers my question. Thanks.Sent from my SM-N900V using TapatalkGlad to help Kruton 1 Quote Link to comment Share on other sites More sharing options...
Renner_construction Posted August 3, 2015 Report Share Posted August 3, 2015 I typically use the paslode or pneu-fast brand nails. It usually depends on what's on sale. I like the paslode nails because they offer a full head nail, sometimes it looks better I guess for exposed plywood or interior framing. I haven't found a holding power difference vs the clipped head. However the pneu-fast nails are the cats meow for a few reasons. The glue on their nails is incredible. If I have to take something apart I get pretty frustrated, because it's not as easy as with the paslode nails. It usually involves the sawzall with a thin kerf metal blade. Also the pneu-fast nails have a larger nail diameter in the 2 3/8 variety (.120 or .131) which holds plywood a little better verses the paslodes .113. However the pneu-fast nails take a bit more power to drive. Usually around 120psi (versus 100psi w/ paslode nails) but they hold a lot better IMO. My guess is that they'd be a PIA to drive in any cordless framing gun. Haha sorry to ramble but just wanted to share my experiences! FYI the only place I found that carries the pneu-fast nails in stock is menards. http://www.pneufast.com/home.jsp Quote Link to comment Share on other sites More sharing options...
Justin Hernandez Posted August 3, 2015 Report Share Posted August 3, 2015 Never heard of that company shipping might cost to much and theres no Menards here. I can only get Paslode nails which are the best IMO I see a lot of so called galvanized nails rot out. The price of the nails is why a lot of people don't buy Paslode nail guns there really missing out. They just buy other brand's and than there fence broads fall off in a few years because of rotten nails. No worries about rambling I love arguing about the Paslode nails with everyone I just wish they can reduce the price of there nails without sacrificing quality. It would really benefit there corporation and a lot more people would consider buying there nail guns Quote Link to comment Share on other sites More sharing options...
torontotoolman Posted August 3, 2015 Author Report Share Posted August 3, 2015 Never heard of that company shipping might cost to much and theres no Menards here. I can only get Paslode nails which are the best IMO I see a lot of so called galvanized nails rot out. The price of the nails is why a lot of people don't buy Paslode nail guns there really missing out. They just buy other brand's and than there fence broads fall off in a few years because of rotten nails. No worries about rambling I love arguing about the Paslode nails with everyone I just wish they can reduce the price of there nails without sacrificing quality. It would really benefit there corporation and a lot more people would consider buying there nail gunsPaslode makes great guns the biggest argument i find people try to say on why.not to buy the gun is the gas.... lol but i think thats a fail of a reason not to buy such an amazing cordless framing nailer in my opinion for ex. last week i got a box of 500 nails pluss 3 gas cartridge for 60$ usually the box of nails comes with the gas anyway so unless you buy the nails and gas on there own its really not a big expenseSent from my SGH-I337M using Tapatalk Quote Link to comment Share on other sites More sharing options...
torontotoolman Posted August 3, 2015 Author Report Share Posted August 3, 2015 And to be honest.my paslode is my at home gun or for side jobs i dont use it for work so for me im not going threw gas cartridge after gas cartridge Sent from my SGH-I337M using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.