midogrumpy Posted December 16, 2017 Report Share Posted December 16, 2017 Hi pictures and some specs are now available DeWalt DS295 Tough System Tool Box (also DWST1-81055) THREE Drawer Built to the same hardwearing standards as the rest of the DeWalt Tough System storage and transport range, this three part tool box provides a durable carry case for equipment and accessories which can be integrated into Tough System racks, whether inside a van, on a wall, or on the DeWalt Tough System Heavy Duty Trolley for transport around the workshop or on site. Alternatively it can simply be used by itself as a reliable, durable and weather resistant toolbox.Features & Benefits• 4mm thick reinforced polypropylene plastic• Dust tight and water jet resistant (IP65) to withstand severe weather conditions• Three compartments for storing tools, acessories and consumables• Padlock eyes for lockable security• Compatible with Tough System racks and trollies for storage and transport 5 3 Quote Link to comment Share on other sites More sharing options...
Sarbatche Posted December 16, 2017 Report Share Posted December 16, 2017 I’ve been waiting for these! When is the release date? Quote Link to comment Share on other sites More sharing options...
Framer joe Posted December 16, 2017 Report Share Posted December 16, 2017 I’m sure everyone was waiting for this and the two drawer...Dewalt would have made a killing if they were available Black fri till now....packout would not have had a chance.....Dewalt makes great stuff,but they drag their feet 2 Quote Link to comment Share on other sites More sharing options...
Jronman Posted December 16, 2017 Report Share Posted December 16, 2017 I'm considering trying one of each. Quote Link to comment Share on other sites More sharing options...
TradeCraft Posted December 17, 2017 Report Share Posted December 17, 2017 Hope they are better than the DS250 drawer units. Those were horrible. Drawers wouldn't even open and close correctly if they were stacked with another Tough System box. Quote Link to comment Share on other sites More sharing options...
Grumpy MSG Posted December 17, 2017 Report Share Posted December 17, 2017 I have 3 of the original 2 drawer units, used in a single stack on a 3/4" piece of plywood just big enough for the drawers with casters underneath ( my own cheap little TSTAK style cart). I admit they are far from perfect, I believe the opening and closing issues some folks had with them are more related to how much weight was in each drawer and the drawer bottom sagging. I kept one tool and it's accessories in each drawer and they worked halfway decent. If you tried to put a hammer drill and an impact in the drawer and then some drill and driver bits, that drawer would have problems until you took some weight out of it. If I had to guess, I would say 10 to 15 pounds was about all each drawer is good for, unless you had the weigh out near the sides of the drawer instead of the middle. I would hate to see what they were like if you put a pound or two of screws or nails in a each of the little plastic boxes inside. Hopefully the next generation will work much better. 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted December 17, 2017 Report Share Posted December 17, 2017 @TradeCraft @Grumpy MSG According to DeWALT this was something they looked into and supposedly the drawer issues are fixed. I don't know how they were fixed. Guess guys will have to get their hands on them to see if DeWALT's claims are true or not. 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted June 3, 2018 Report Share Posted June 3, 2018 I was trying to see where the 3 drawer would be available in North America and I could only find it listed on UK sites. Hopefully this comes to North America. Supposedly the new 2 drawer is coming first of July. Quote Link to comment Share on other sites More sharing options...
Bremon Posted June 3, 2018 Report Share Posted June 3, 2018 Can’t wait to get my hands on some new drawer units. So pumped. 1 Quote Link to comment Share on other sites More sharing options...
JRS5565 Posted June 3, 2018 Report Share Posted June 3, 2018 I would love to know if flexvolt 9/12ah will fit in the two drawer and if so how many? 1 Quote Link to comment Share on other sites More sharing options...
Framer joe Posted June 15, 2018 Report Share Posted June 15, 2018 @JRS5565...I’d say so the 9ah fit in my Tstak drawer 1 Quote Link to comment Share on other sites More sharing options...
Coledog Posted August 17, 2019 Report Share Posted August 17, 2019 Has this tool box been discontinued now? i can't find one in stock anywhere?? Quote Link to comment Share on other sites More sharing options...
Jronman Posted August 17, 2019 Report Share Posted August 17, 2019 These were not available in North America Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.