FrosBros82 Posted March 26, 2015 Report Share Posted March 26, 2015 Has anyone tried the Makita worm drive saw? I have a side winder currently, but I am looking to add a worm drive at some point. I just noticed that Makita has a decent price at HD, so I thought I would ask around. Thanks, FB82 Quote Link to comment Share on other sites More sharing options...
madman_us Posted March 26, 2015 Report Share Posted March 26, 2015 why you want a worm drive saw ?! Quote Link to comment Share on other sites More sharing options...
BK13 Posted March 26, 2015 Report Share Posted March 26, 2015 I've not used one, but in my neurotic tool surfing, the Makitas get good reviews. If I were buying a new worm drive saw today (I'm not as of now, but you never know what may happen on the drive home) I'd be looking at, in order, the Skil Mag LT, the Makita, and the Bosch. Quote Link to comment Share on other sites More sharing options...
FrosBros82 Posted March 26, 2015 Author Report Share Posted March 26, 2015 I am buying one for easier use on ripping and less binding. Also, have heard good things about Skil too, so I may have to do more research on the subject! FB82 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted March 26, 2015 Report Share Posted March 26, 2015 FB82 I've got the Makita Magnesium Hypoid saw. It'll cut through cars. I've had it for six years and it is awesome. Get it. You won't be disappointed. I can cut straight lines with it no guide no nothing. Lots of torque in the motor. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted March 26, 2015 Report Share Posted March 26, 2015 http://www.amazon.com/Makita-5377MG-Magnesium-4-Inch-Hypoid/dp/B000N5UR5A Quote Link to comment Share on other sites More sharing options...
regopit Posted March 27, 2015 Report Share Posted March 27, 2015 I have had the Skil worm drive for ever they are great if you do a lot of framing Quote Link to comment Share on other sites More sharing options...
MikeyB Posted March 27, 2015 Report Share Posted March 27, 2015 I have an old Black and Decker worn drive and its a Tiger.... The Makita that Chris has looks like a great saw 1 Quote Link to comment Share on other sites More sharing options...
Poisonfangs85 Posted March 28, 2015 Report Share Posted March 28, 2015 I have been using Skil worm drives for over 10 years. I have two in the truck and about 4 in the garage I use for parts. Funny thing is I have never bought one, I just acquire them here and there. Quote Link to comment Share on other sites More sharing options...
BK13 Posted March 28, 2015 Report Share Posted March 28, 2015 Funny thing is I have never bought one, I just acquire them here and there.Wow, I'm hanging with the wrong crowd... Quote Link to comment Share on other sites More sharing options...
madman_us Posted March 28, 2015 Report Share Posted March 28, 2015 i really never used one before lower rpm but more torque and better visibility of the blade while cutting Quote Link to comment Share on other sites More sharing options...
NERemodeling Posted March 29, 2015 Report Share Posted March 29, 2015 I have the Bosch and it sure is a powerhouse.. I used to use it for the majority of my framing but now I find myself using my cordless tools more and more.. between my 18v x2 7 1/4 makita and my new BL makita 6 1/2 I can do most of my cutting, without a cord and with a whole lot less weight!If I was in the market for a new worm drive today I would be looking a lot at the skilsaw mag77lt and the makita hypoid magnesium 1 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted March 29, 2015 Report Share Posted March 29, 2015 John, how are you liking that Makita 7-1/4 x2 saw? Quote Link to comment Share on other sites More sharing options...
NERemodeling Posted March 29, 2015 Report Share Posted March 29, 2015 John, how are you liking that Makita 7-1/4 x2 saw?Love it man! I just built a 10x12 addition on a customers house for and it was the only saw i used for all of the demo, framing, sheathing, subfloor etc.. i even had to rip cut a bunch of 2x doug fir and it chugged right along with no overheating, no stalling, no overload protection at all during the entire job.. i thought battery life was very respectable and with two chargers (or the new dual charger) going the saw easily lasts longer than it takes to charge up a fresh set of batteries so i had no problem running all day non stop. it cuts as fast as i wanted to push it and more than enough power to get the job done... it has a surprising amount of torque of a battery tool! Quote Link to comment Share on other sites More sharing options...
madman_us Posted March 29, 2015 Report Share Posted March 29, 2015 and now: how you like the bosch wormdrive ?? ? Quote Link to comment Share on other sites More sharing options...
NERemodeling Posted March 30, 2015 Report Share Posted March 30, 2015 and now: how you like the bosch wormdrive ?? ?nothing bad say about that beast.. its got plenty of power for anything your going to throw at it.. as long as you have a halfway decent blade on it that baby is going to cut whatever you point it at.. it is heavy though and if you don't need the power, it isn't worth the weight.. i actually did have the base plate crack once but it did take a decent fall... just ordered up a new base from ereplacementparts.com and i was back in business Quote Link to comment Share on other sites More sharing options...
madman_us Posted March 30, 2015 Report Share Posted March 30, 2015 the worm drive is @13.2 lb - did you ever checkout bosch's CS5, its left bladed and weighs just 10 lb Quote Link to comment Share on other sites More sharing options...
NERemodeling Posted March 30, 2015 Report Share Posted March 30, 2015 no i havent checked out the CS5.. i used the CS20 for many years and it has now become my beater saw (its on its last leg after a lot of use) i love how that saw had the extension cord plug at the back of it instead of a standard cord.. Quote Link to comment Share on other sites More sharing options...
madman_us Posted March 30, 2015 Report Share Posted March 30, 2015 the extension cord feature is pretty cool Quote Link to comment Share on other sites More sharing options...
hathatyl Posted March 30, 2015 Report Share Posted March 30, 2015 I have the Bosch and it sure is a powerhouse.. I used to use it for the majority of my framing but now I find myself using my cordless tools more and more.. between my 18v x2 7 1/4 makita and my new BL makita 6 1/2 I can do most of my cutting, without a cord and with a whole lot less weight!If I was in the market for a new worm drive today I would be looking a lot at the skilsaw mag77lt and the makita hypoid magnesium FB82 I've got the Makita Magnesium Hypoid saw. It'll cut through cars. I've had it for six years and it is awesome. Get it. You won't be disappointed. I can cut straight lines with it no guide no nothing. Lots of torque in the motor. That hypoid is a beast! Quote Link to comment Share on other sites More sharing options...
Hugh Jass Posted March 31, 2015 Report Share Posted March 31, 2015 I researched this topic to death and ended up with the Skil LT. Perfect saw. I even use it to cut expansion joints in concrete with a diamond blade, doesn't even phase it. Quote Link to comment Share on other sites More sharing options...
madman_us Posted March 31, 2015 Report Share Posted March 31, 2015 great choice, looks really solid Quote Link to comment Share on other sites More sharing options...
FrosBros82 Posted April 1, 2015 Author Report Share Posted April 1, 2015 I kinda like the Makita, I actually think it is $159.99 at HD right now. So that is a pretty decent deal really. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted April 1, 2015 Report Share Posted April 1, 2015 Well you've gotten some great insight from the guys FrosBros, now it's time to pull the trigger! I love my magnesium hypoid but Skill and Bosch are sounding pretty good too! Quote Link to comment Share on other sites More sharing options...
NERemodeling Posted April 2, 2015 Report Share Posted April 2, 2015 True!!You really cannot go wrong with any of them.. they are all super powerful saws that will do everything you need them to do.. none of them have had a major change in a long time... that's a good thing though. It means they just plain work!! I definitely give Malika some points for innovation and the fact that they make really solid, excellent tools.. I like what the guy in the review said about them as a company Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.