Nalu Rash

Thanks this was very useful in my decision

Thanks for this!

Yes I noticed this also. I'm sure the runtimes would be similar between a DeWalt Circ Saw with a 5.0Ah and a Milwaukee Circ Saw with a 4.0Ah battery. My personal concern however is not about run-times. I can easily deal with low run-times by having one or two other batteries being charged. Like I said, I'm more of a corded user, so I won't be using a cordless all day. I just want a cordless tool that will match the power of my corded tool when I need it. As far as brushless vs brushed, I'm really not hung up on one or the other. I just need something that will deliver as much power as possible. From what very little I know about motors, I gather that brushless is more efficient, equating to more power at the rotor. If I am wrong, and I often am, then I would love for it to be clarified for me and others as well. I hope this is not turning out to be a Red vs Yellow thing. I own many different brands of tools and I love them all. I just want to know that when I put my corded tool down and reach for a cordless, it won't slow me down. If the DeWalt can deliver that, then that will be the one for me. In the end, I'll probably have to try it out and see how it works but currently I think I'm headed towards the Milwaukee FUEL platform. Thank you for your input Gatorb888, I really appreciate it. I'm a huge DeWalt tool fan, and I'll be buying more tools from DeWalt for sure. I use my DCD995 all the time and I'm proud to own it.

That's what I was concerned about. I didn't want to buy these brushed tools, only for DeWalt to come out with some brushless tools a few months from now. Or is this just a ploy to get me to buy Milwaukee DR99??? lol kidding

Thank you BigMikeZ. Yeah I can hold out for a bit, but the itch is hard! lol. I do like my DeWalt drills and drivers, they've worked very well and I'm happy with them.

I haven't even considered the Makita, I'll have to take a look at what they offer as well. Thanks for your input, I greatly appreciate it, especially because I think you push your tools hard.

KDV - Your 2 and a half year quotes are classic! lol

Here's the dilemma: I have $700 to spend on cordless tools, but I don't know which battery platform to get myself into. The only brands that I am looking at are DeWalt 20V and Milwaukee FUEL, so please feel free to express your thoughts on either brand. Currently, I have some DeWalt 20V Impact Drivers and Hammer Drill/Drivers, so I have a foot in the DeWalt Pool. I mainly use corded tools, so I'm spoiled by having unlimited run time and lots of power. From what I can gather, it seems to me like if I go with Milwaukee I won't be sacrificing power and the run times are awesome. I just don't know how powerful the DeWalts are. I hate being stuck behind a tool that won't work well, or slow me down. I've already had some bad experiences with cordless Ryobi's and I hope I don't get the same problem's from DeWalt. The main tools that I am looking at are a Cordless Circular Saw and a Cordless Reciprocating Saw. The next in line would be a cordless SDS Hammer Drill. Do the DeWalt versions come close in terms of power to corded versions? I already know that Milwaukee is on par with corded in terms of power. Here's the list of tools that I'm looking to purchase from Dewalt (Total: $637 ) Circular Saw - DCS391B ($119) Reciprocating Saw - DCS380B ($119) Miter Saw w/ One 3.0Ah Battery and Charger - DCS361M1 ($399) Amount Left: $63 And the list of tools I'm looking to purchase from Milwaukee (Total: $603) Circular Saw w/ Two 4.0Ah Batteries and Charger - 2731-22 ($404) Reciprocating Saw - 2720-20 ($199) Amount Left: $97 I appreciate any thoughts, comments or suggestions.Thanks TIA forum in advance! Take care.

I only got a Facebook account because I thought I needed one to create an account on this forum, and the only "friend" I have is my Wife, lol. Wish I could see all the new DeWalt tools as well. Does anyone know if they have any brushless saws in the works? I'm thinking about going Milwaukee FUEL unless DeWalt comes out with something cool.

Welcome to the TIA Forum!

That's amazing. Her parent's did an excellent job raising such a beautiful kid. I know a few homeless people that live on the beach, my father included. He built himself a shelter years ago, living along the side of a cliff. Tourists would often visit his place because it was just beautiful. He made stairs for easy access down the cliff to the beach below. He made seating areas and shaded areas as well. It was a cool spot, unfortunately it was destroyed by the police. Anyway, getting off subject here. This girl has a heart filled with compassion. I hope I can raise my son to have the same

Formally, a Custom Sign Shop. Informally, a Custom Everything Shop. When not making custom signs, we make cabinets/furniture, do remodels, anything to keep us busy.

Damn what a tough question. Like asking someone "Who's your favorite child?". It's hard for me to say. I think overall though, I would have to give it to DeWalt. They have a great line of corded and cordless tools that I love. I have two DeWalt Planers and an old DeWalt Radial Arm Saw in my shop. It seems like they even have some great cordless yard tools that I can't wait to get a hold of. For cordless, I go with Milwaukee. M18 Fuel is hard to beat. For my shop, it goes to Delta. Panel Saw, Unisaw Tablesaw, Drill Press, Bandsaws, Jointer, Planer, all Delta's in my shop. Great value tools. It would go to Powermatic if I could afford it though.

LordDiesel gave some good advice. You may already have heard of Mr. Larry Haun, he pretty much wrote the book on home construction. I would consider buying any of his books as he gave a list of basic tools used. Heres a link: http://www.amazon.com/Homebuilding-Basics-Carpentry-Editors-Fine/dp/1561581674/ref=la_B001JS4TH2_1_4?s=books&ie=UTF8&qid=1433266136&sr=1-4 There is also ton's of info in that book to reference off of. As for a tool list, I just started off with basic hand tools and power tools. I worked with people that already had a ton of tools for me to use. After a year of work, I began to get a feel for the way I work and the tools I use most often. So basically it just boils down to getting some basic tools at first, and over time, many many years, you'll eventually have most of the tools you need. But it really never ends. You start buying tools to fit the job/project your working on. Then you start buying tools just to have them, even if you can't justify the purchase to your wife, haha. Anyway's hope you find what your looking for

Very nice find!

Man I love old tools. An old cars also. It just seems like they made things with pride and quality in mind. What an awesome saw, thanks for posting

Nice tip! That looks like a magnet salvaged from an old computer hard disk drive. In case anyone else needs to know, you can salvage two very strong magnets from old computer hard disk drives. Just open them up and you'll be able find the magnetic parts fairly easily. I stick a key ring on them and attach them to my belt to hold small metal tools or screws, they work great, and they are free if you can find old computers laying around

Hahahaha.....I bet she did a terrible job, but looked great while doing it!

Yup I agree, Tape is the best

Interesting. I guess it works for small area's, especially if painting with a texture to cover up all the mess. A 2" gap is fairly small. Glad it worked out for you, but honestly wouldn't have done that.

Your not crazy, it's a great idea! I think she would love those, especially if you paint them with some Pink Krylon or something <----I'm kidding around here. They work very well and it's a huge time saver knowing where all your things are. I bought a bunch of Tstaks from Amazon for a great price and free shipping. Hope you get them man, you both will love them.

That's great Moze! I think it's great to be self-employed, especially if you have a passion for it. I work for an architectural sign company, meaning we mainly do signs for buildings, hotels and hospitals. We do everything from design, fabrication and installation. We have all the tools in the book, laser engraver, cnc machine, large format printer, spray booth, woodshop, etc. Currently I'm mostly sitting behind a desk, but I really enjoy going out on installations. I've never thought about possibly going into business for myself doing installs. I'm gonna definitely look into this. Take care

Thank you!

Thank you! I'm on Oahu in a city called Ewa Beach. I see your in Ohio, my wife is from Ohio, alumni of Gahanna High School I think. Take care man, Go Bucks!

Hmmmm....I think I'll have to pick this up for Father's Day! Can't wait