Jronman Posted September 23, 2017 Report Share Posted September 23, 2017 So as many know the OSHA silica dust regulations are taking effect. Just wondering who is going to comply? It's too bad that many smaller crews, like where I work, probably won't comply. Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted September 25, 2017 Report Share Posted September 25, 2017 That will suck if they don't comply. I am usually against regulations, but I think this is a good one that really protects the worker. Call them in if they don't. It sucks because once some get sick, these companies don't care. They just let you go and find someone else. 3 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted September 25, 2017 Report Share Posted September 25, 2017 Yeah, this is one of the few I can get on board with. Normally it's all Darwin-award stuff, this is actually helpful. I can see why smaller operations would take a long time to convert, not everyone can afford to outfit the whole crew with new dust solutions...a lot won't care because of the "It never was a problem before, be a man" mentality. 1 Quote Link to comment Share on other sites More sharing options...
khariV Posted September 25, 2017 Report Share Posted September 25, 2017 The sad truth is that there will always be someone willing to do the work without the proper safety equipment and procedures in place. A worker living paycheck to paycheck has to decide if they’re going to risk getting fired by standing up to the boss and telling them they won’t do something dangerous or idiotic. Given the choice of definitely not feeding your kids this week or possibly getting injured at some point in the future, most aren’t going to hold out for what’s “right” no matter how justified they actually are. Unless the company owners get slapped with serious fines and consequences, nothing is going to change and there just aren’t enough inspectors to catch every violation. Quote Link to comment Share on other sites More sharing options...
BMack37 Posted September 25, 2017 Report Share Posted September 25, 2017 49 minutes ago, khariV said: The sad truth is that there will always be someone willing to do the work without the proper safety equipment and procedures in place. A worker living paycheck to paycheck has to decide if they’re going to risk getting fired by standing up to the boss and telling them they won’t do something dangerous or idiotic. Given the choice of definitely not feeding your kids this week or possibly getting injured at some point in the future, most aren’t going to hold out for what’s “right” no matter how justified they actually are. Unless the company owners get slapped with serious fines and consequences, nothing is going to change and there just aren’t enough inspectors to catch every violation. ...there's plenty of people doing work without a license too...Or illegal workers being paid under the table. If there are rules and regulations there will plenty of people trying to get around them. Quote Link to comment Share on other sites More sharing options...
regopit Posted September 28, 2017 Report Share Posted September 28, 2017 The sad truth is most small companies will not comply because they can slip under the radar. I once did a total gut for a house flipper 1 block away from our local OSHA office. I had 4 dumpsters setting in front full of crap and not once in 20 weeks did a inspector stop to see what we were doing. As far as finding somebody to do the work unsafe there is no shortage of idiots to do the work. I bidded on a job not to long ago. The house was built in the 40's . It had loads of lead paint, asbestos, and mold a triple whammy for the flipper. I gave him a price and told him I can take care of the lead but he would have to get someone certified for the mold and asbestos. I drove by the house a few weeks later and saw about 4 guys that hang out at the HD looking for work hauling the crap out to the dumpster covered in dust and not one piece of PPE. Quote Link to comment Share on other sites More sharing options...
Jronman Posted September 29, 2017 Author Report Share Posted September 29, 2017 @regopit could the homeowner get in trouble for that? Quote Link to comment Share on other sites More sharing options...
Cr8ondt Posted September 30, 2017 Report Share Posted September 30, 2017 On 9/28/2017 at 9:26 PM, Jronman said: @regopit could the homeowner get in trouble for that? Technically... Yes, though shouldn't ever happen, but I have heard a story about 6 hours after a hurricane that code compliance was issuing tickets... So when government gets involved anything can and probably will happen. Quote Link to comment Share on other sites More sharing options...
calidecks Posted September 30, 2017 Report Share Posted September 30, 2017 Got my eye on this. http://www.toolnut.com/milwaukee-8960-20-8-gallon-dust-extractor.html?utm_source=google_shopping&gclid=CjwKCAjw3rfOBRBJEiwAam-GsA2V9qVmveeW-itjgPipN1Piwl-MjT31IJ92BXVXNs2JN53fOQT_7RoCLA8QAvD_BwEMike._______________[emoji631] [emojiyeq] Quote Link to comment Share on other sites More sharing options...
Bmill25 Posted October 9, 2017 Report Share Posted October 9, 2017 I'm usually a one-man crew masonry contractor, and usually I'm just cutting one or two concrete block every so often. If that's the case, I'll take a long breath and cut quickly. If it's a lot of cutting, I'll wear a respirator. If they can come up with a cordless and waterless solution to suck up the dust, I'm all for it, but until then I'll probably end up taking deep breaths. Quote Link to comment Share on other sites More sharing options...
Jronman Posted October 10, 2017 Author Report Share Posted October 10, 2017 I heard there a new product in the works for dealing with dust when using a mixer. I would have expected a masonry saw to have a water system to cool the blade off. Maybe it could suppress the dust too? Quote Link to comment Share on other sites More sharing options...
Cr8ondt Posted October 10, 2017 Report Share Posted October 10, 2017 1 hour ago, Jronman said: I would have expected a masonry saw to have a water system to cool the blade off. Maybe it could suppress the dust too? It does. Rented a Husqvarna gas monster with water hook up to cut out for a basement egress window and not a bit of noticeable dust. 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted October 10, 2017 Author Report Share Posted October 10, 2017 cool Quote Link to comment Share on other sites More sharing options...
Bmill25 Posted October 10, 2017 Report Share Posted October 10, 2017 9 hours ago, Cr8ondt said: It does. Rented a Husqvarna gas monster with water hook up to cut out for a basement egress window and not a bit of noticeable dust. My saw does do that as well, and it does a great job at cutting down the dust. But when I'm working at a new construction home where there is no water or electric there's not many options for dust control. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.