BruceG24 Posted June 14, 2018 Report Share Posted June 14, 2018 I have a cordless 20v max skill saw. Less than a year old and haven't used it much. 20v lithium batteries work totally fine on my drill. My problem is whenever I use one of my 20v batteries freshly and fully charge with my saw, it dies in less than 2 mins. I can't cut 5 ft of 3/4" soft pine board and it dies. I'm using a blade for wood cutting too. The blade does not freely spin like on my ryobi. Don't know if that matters. Any thoughts? I'm thinking I need bigger batteries or a new saw. Quote Link to comment Share on other sites More sharing options...
Bremon Posted June 15, 2018 Report Share Posted June 15, 2018 That battery isn’t a good match for that saw at all. Compact 1.3 amp hour if memory serves? Much better off with the thicker batteries that have 10 cells in them rather than 5. 1 Quote Link to comment Share on other sites More sharing options...
Framer joe Posted June 15, 2018 Report Share Posted June 15, 2018 That saw should be used with a minimum 5ah battery. And use thin kerf blades like the diablo tracking point or Flexvolt blades... 1 Quote Link to comment Share on other sites More sharing options...
fm2176 Posted June 15, 2018 Report Share Posted June 15, 2018 There could be a problem with your saw, but I think bigger batteries would resolve this issue. The battery you have on the saw is a 1.5Ah (or maybe 1.3Ah), which is about the smallest capacity you can get. My old Porter Cable ran okay with its 1.3Ah batteries, but compared to a 4+Ah those tiny batteries are almost useless on something like a saw. Quote Link to comment Share on other sites More sharing options...
Moore,C. Posted June 15, 2018 Report Share Posted June 15, 2018 Batteries for sure, saws are notorious for high draw. That's the primary tool people pick up high cap packs for lol love my 391 and it's new 577 brother, they're both outstanding with a capable pack 2 Quote Link to comment Share on other sites More sharing options...
DR99 Posted June 15, 2018 Report Share Posted June 15, 2018 Yep definitely sounds like a battery overloading situation. Quote Link to comment Share on other sites More sharing options...
Jronman Posted June 15, 2018 Report Share Posted June 15, 2018 Even a 2.0 will drain quickly. Getting at least a 10 cell pack will see noticeable improvement. A 4.0 or a 5.0 are probably the most cost effective 10 cell options Quote Link to comment Share on other sites More sharing options...
BruceG24 Posted June 15, 2018 Author Report Share Posted June 15, 2018 Thanks guys I'll pick one up tomorrow 2 Quote Link to comment Share on other sites More sharing options...
Framer joe Posted June 16, 2018 Report Share Posted June 16, 2018 Ebay @BruceG24....great deals on 2pack 5ah...usually 80-90$ Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted June 16, 2018 Report Share Posted June 16, 2018 eBay is a great place. I also notice that Home Depot has some one day specials that are too bad for a two pack Quote Link to comment Share on other sites More sharing options...
Babysaw Posted June 16, 2018 Report Share Posted June 16, 2018 14 hours ago, Framer joe said: Ebay @BruceG24....great deals on 2pack 5ah...usually 80-90$ Im curious Joe, do you still get the factory warranty buying off eBay? I’ve been tempted by eBay retailers a few times. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted June 16, 2018 Report Share Posted June 16, 2018 10 minutes ago, Babysaw said: Im curious Joe, do you still get the factory warranty buying off eBay? I’ve been tempted by eBay retailers a few times. Normally the larger companies go date stamped on batteries and tools by sn which lets them know how long warranty is for. Recon is different. Quote Link to comment Share on other sites More sharing options...
Babysaw Posted June 16, 2018 Report Share Posted June 16, 2018 5 minutes ago, ChrisK said: Normally the larger companies go date stamped on batteries and tools by sn which lets them know how long warranty is for. Recon is different. Sorry, I’m not fully understanding you. Are you saying if I buy from a larger retailer on eBay, new, that the serial number will be in dewalts system and I’m good to go? Quote Link to comment Share on other sites More sharing options...
ChrisK Posted June 16, 2018 Report Share Posted June 16, 2018 What I am saying is if you buy off any retailer, a larger brand tool, those tools are date stamped. For instance if you purchase a Milwaukee tool and it is not working for some reason, Milwaukee will generally take the tool in for repair or replacement because they go off of the serial number. Dewalt is much the same. If it is a recon tool it comes with a different warranty and the tool serial number is listed as a recon. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted June 16, 2018 Report Share Posted June 16, 2018 Same with Dewalt. I purchased a flexvolt tool and battery for eBay. The tool worked great but the battery failed. Dewalt graciously took in the battery and gave me a new one because it was date stamped and that is how they determine how old the battery or tool is Quote Link to comment Share on other sites More sharing options...
Babysaw Posted June 16, 2018 Report Share Posted June 16, 2018 Okay, last question: do you have to offer proof of purchase upon use of warranty? Meaning, I buy a drill from a pawnshop, immediately warranty it, would a pawn shop receipt work or must I be original purchaser? Thanks for your patience explaining this to me 1 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted June 16, 2018 Report Share Posted June 16, 2018 Beats me dude, I don’t bother registering tools unless they say Festool on them. Most of them use the date stamp. Exception is Ridgid. Never buy from anyone but Home Depot, ALWAYS register. 1 Quote Link to comment Share on other sites More sharing options...
wilkinsondom Posted June 19, 2018 Report Share Posted June 19, 2018 If the tool is within warranty period by date of manufacture, you do not need proof of purchase for a warranty claim. If you are within warranty period from date of purchase but not from date of manufacture and want to make a warranty claim you will have to provide proof of purchase from an authorized retailer.Sent from my Pixel 2 XL using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bremon Posted June 19, 2018 Report Share Posted June 19, 2018 On 6/16/2018 at 10:23 AM, Babysaw said: Sorry, I’m not fully understanding you. Are you saying if I buy from a larger retailer on eBay, new, that the serial number will be in dewalts system and I’m good to go? Yes. The serial number on the tool includes a manufactured date that’s generally the week and year ie 4617 or something like that. I rarely keep receipts because I only lose a few months of warranty. Receipts are more important to me on Dewalt and Makita because of 3 year warranty rather than Milwaukee with 5. Quote Link to comment Share on other sites More sharing options...
Guyinatree Posted June 19, 2018 Report Share Posted June 19, 2018 Register it on the dewalt website. I have been doing that to help keep track of purchase date and then I can go back and find the receipt on my HD account. Also as far as picking up anew battery goes, you would probably benefit the most from capitalizing on one of the flexvolt deals. That way down the road if you get one of those tools you already have a battery. HOME DEPOTFlexvolt 6/2 ah - $15020v max 5 ah - $140Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.