JimboS1ice Posted April 14, 2016 Report Share Posted April 14, 2016 Enjoy 7 Quote Link to comment Share on other sites More sharing options...
comp56 Posted April 14, 2016 Report Share Posted April 14, 2016 not much feedback like the Ridgid had....great video by the way 1 Quote Link to comment Share on other sites More sharing options...
Mondo1310 Posted April 14, 2016 Report Share Posted April 14, 2016 Great video Jimbo. I see you celebrated the Gen2 with a few Guinness brewskis. 3 Quote Link to comment Share on other sites More sharing options...
John Glassey Posted April 14, 2016 Report Share Posted April 14, 2016 Nice Jimbo, keep making me spend my money why don't you. You know I have a condition, lol. 1 Quote Link to comment Share on other sites More sharing options...
Mondo1310 Posted April 14, 2016 Report Share Posted April 14, 2016 Are you going to periscope the TOOL FIGHT?!?!? Quote Link to comment Share on other sites More sharing options...
jrsalas Posted April 14, 2016 Report Share Posted April 14, 2016 When is this start at? Sent from my VS985 4G using Tapatalk Quote Link to comment Share on other sites More sharing options...
Mondo1310 Posted April 14, 2016 Report Share Posted April 14, 2016 3 minutes ago, jrsalas said: When is this start at? Sent from my VS985 4G using Tapatalk Tomorrow if he decides to do it. 1 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted April 15, 2016 Report Share Posted April 15, 2016 Man Jimbo ur on a roll with these videos bro keepem up dude! 1 Quote Link to comment Share on other sites More sharing options...
kruton Posted April 15, 2016 Report Share Posted April 15, 2016 Looks nice Jimbo. Way to rock the Guiness too. Sent from my SM-N900V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted April 15, 2016 Report Share Posted April 15, 2016 Looks nice Jimbo. Way to rock the Guiness too. Sent from my SM-N900V using Tapatalk Saw that too! Sent from my SCH-I535 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
kruton Posted April 15, 2016 Report Share Posted April 15, 2016 Saw that too! Sent from my SCH-I535 using Tapatalk Not only does he have good taste in tools, but also brew! Sent from my SM-N900V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
regopit Posted April 15, 2016 Report Share Posted April 15, 2016 Nice video Jimbo you have just help make my mind up. I'm going for the 3/8 and 1/4 hex one key. I have the brushless hex 1st gen and a brushed hex that is going to to be replaced with the one key. If anybody wants a deal on a Milwaukee M18 brushed impact. let me know. It will be a deal you can't pass up. 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted April 15, 2016 Author Report Share Posted April 15, 2016 Nice video Jimbo you have just help make my mind up. I'm going for the 3/8 and 1/4 hex one key. I have the brushless hex 1st gen and a brushed hex that is going to to be replaced with the one key. If anybody wants a deal on a Milwaukee M18 brushed impact. let me know. It will be a deal you can't pass up.[emoji3] Well really see on the impact fight tomorrow morning. 2 Quote Link to comment Share on other sites More sharing options...
kruton Posted April 15, 2016 Report Share Posted April 15, 2016 Nice video Jimbo you have just help make my mind up. I'm going for the 3/8 and 1/4 hex one key. I have the brushless hex 1st gen and a brushed hex that is going to to be replaced with the one key. If anybody wants a deal on a Milwaukee M18 brushed impact. let me know. It will be a deal you can't pass up.[emoji3] Are you going to post it in the sale section? I'll keep my eye out. Sent from my SM-N900V using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted April 15, 2016 Report Share Posted April 15, 2016 I use my 2753 for larger screws and self tappers, and my 2450 (m12 brushed impact) is used for sheet metal screws. The 2753 doesn't get the fourth mode used much at all because I was using it to drive in some larger self tappers and it would drop down in power to start hammering, but the screw had a long ways to go yet. It also doesn't work with 3" screws in wood, or screws of about that size, so I hardly used it. One thing I started using the fourth mode for is when putting tapcon screws in cement, that works fabulous actually, it can be really easy sometimes to snap the screw, or strip out the concrete when driving those screws in, but it actually works very well to put it in the self tapper mode and not have to worry about a split second miscalculation. If the screw just doesn't seem to want to drive in, and you are afraid of snapping it, remove the screw, and run your concrete bit back in the hole, and out again, in an attempt to clear the hole of residual concrete specks. Then drive the screw back in and that usually takes care of it. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted April 15, 2016 Author Report Share Posted April 15, 2016 I use my 2753 for larger screws and self tappers, and my 2450 (m12 brushed impact) is used for sheet metal screws. The 2753 doesn't get the fourth mode used much at all because I was using it to drive in some larger self tappers and it would drop down in power to start hammering, but the screw had a long ways to go yet. It also doesn't work with 3" screws in wood, or screws of about that size, so I hardly used it. One thing I started using the fourth mode for is when putting tapcon screws in cement, that works fabulous actually, it can be really easy sometimes to snap the screw, or strip out the concrete when driving those screws in, but it actually works very well to put it in the self tapper mode and not have to worry about a split second miscalculation. If the screw just doesn't seem to want to drive in, and you are afraid of snapping it, remove the screw, and run your concrete bit back in the hole, and out again, in an attempt to clear the hole of residual concrete specks. Then drive the screw back in and that usually takes care of it. Yes agreed the precision modes are good for shorter screws, anything north of 2" my patience runs out Quote Link to comment Share on other sites More sharing options...
regopit Posted April 15, 2016 Report Share Posted April 15, 2016 1 hour ago, kruton said: Are you going to post it in the sale section? I'll keep my eye out. Sent from my SM-N900V using Tapatalk I tell you right here. $25 shipped from me to your front door 4 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted April 15, 2016 Report Share Posted April 15, 2016 2 minutes ago, regopit said: I tell you right here. $25 shipped from me to your front door Good night a half gallon of maple syrup costs more than that..... ok why did I compare it to maple syrup.. i have no idea ha 3 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted April 15, 2016 Author Report Share Posted April 15, 2016 10 minutes ago, KnarlyCarl said: Good night a half gallon of maple syrup costs more than that..... ok why did I compare it to maple syrup.. i have no idea ha You must like maple syrup if you can rifle off the cost of half a gallon... ...thats a lot of syrup And thats a steal for that impact! 2 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted April 15, 2016 Report Share Posted April 15, 2016 You must like maple syrup if you can rifle off the cost of half a gallon... ...thats a lot of syrup And thats a steal for that impact! Indeed. One gallon is $46 and a quart is $14 My uncle makes it on a large scale in Michigan and we grew up on it Sent from my SCH-I535 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted April 15, 2016 Author Report Share Posted April 15, 2016 Just now, KnarlyCarl said: Indeed. One gallon is $46 and a quart is $14 My uncle makes it on a large scale in Michigan and we grew up on it Sent from my SCH-I535 using Tapatalk Ah... well that makes sense lol Quote Link to comment Share on other sites More sharing options...
khariV Posted April 15, 2016 Report Share Posted April 15, 2016 I tell you right here. $25 shipped from me to your front door Which impact are you referring to? Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted April 15, 2016 Report Share Posted April 15, 2016 Which impact are you referring to? M18 brushed driver....@regopit that's tool only just to clarify? Sent from my SCH-I535 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Dano123 Posted April 15, 2016 Report Share Posted April 15, 2016 I tell you right here. $25 shipped from me to your front door That would be a good tool for Protoolnut to add to his collection... can't beat that price! Sent from my SCH-I545 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
regopit Posted April 15, 2016 Report Share Posted April 15, 2016 6 hours ago, KnarlyCarl said: M18 brushed driver....@regopit that's tool only just to clarify? Sent from my SCH-I535 using Tapatalk This is just a bare tool no battery. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.