RickyMcGrath

Unforninately, the DCB101 charger doesn't have the keyhole slots. The DCB112 does but it has half the output amps @ 2.0 vs the 4.0 for the DCB101.

I gotcha. True. Mine hold up real well right above the DeWalt logo on the front. It's a somewhat recessed area to protect from getting scrapped up. But I do like the idea of having a dedicated label cover like the T-Stak.

Anyone interested in a DCR018 Radio? It's in great shape. Works great. Just don't need it any longer. Make me an offer. The Woodlands, TX.

I found some incredibly durable exterior grade labels at a craft store. Printed them with the yellow background and labels my Tough System. It worked very nicely. I'm sure you could too, especially since you designed those stickers for the Track Saw Guide Rail.

You shouldn't be able to spin them freely. The chain is engaged on the sprocket to the drive motor. I'd investigate the one that spins freely. Is it the in feed or out feed roller that spins?

Deals are deals. Thanks for sharing!

After a couple years of beating them up, spilling paint, caulk and glue all over them, decided it was time to give them a little TLC. A little dawn dish soap and some 400 grit wet sanding and they are all cleaned up. Except for the minor scratches and scuffs, they're almost brand new.

So after looking at the diagram (http://servicenet.dewalt.com/Products/GetDocument?docName=EA022468.tif&docPath=http%3A%2F%2Fdocuments.dewalt.com%2Fdocuments%2FEnglish%2FExploded%2520Art%2FEA022468.png&productId=22538&productType=7605&documentId=21151) I'm thinking either a sprocket, #83, or the chain, #101. Also, check the speed selector lever. If it's not fully engaged to 1 or 2, the rollers won't spin. Did you happen to change the speed while the planer was off?

With the loud pop, I'm suspecting a gear. I can try to pull mine apart tomorrow and browse to see what I can find.

I had a scrap of acrylic laying around and it should work just fine. A couple holes for vents and it's all good.

great little find Mike! You're always posting all the deals!

I held off for a while but then I joined to follow TIA. Then after searching a little, there are hundreds of handy posts for wood working and garage stuff. I have quite the little board of things to build.

I'm thinking I may go with acrylic plates. Easy to bend with a MAP torch. The cutouts will be the only catch.then I can do all my chargers for DeWalt (20, 12 and 8v), ryobi Tek, Bosch, Paslode and Milwaukee.

This has to be the best one I've seen yet. Very clean setup. http://pinterest.com/pin/493988652854413178/

Seems like they are here on average of once a month.

That Lennox Hole Saw kit is a good deal. http://m.lowes.com/pd/LENOX-13-Piece-Bi-Metal-Hole-Saw-Kit/50374130

Absolutely love it! It's the variable speed one. I highly recommend it.

They were a no show today for me. I just go so I can get some face time with the rep. At this point, she knows me by name and chats with me each time I see her. It also got me a free Bluetooth speaker at the last event.

I love my grrippers. I bought two last year and use them a lot. It's a little tedious to setup for every cut when using different size stock, but those extra few seconds are well worth it.

I have the rt angle drill in 20v. I don't find myself using it a lot. It's a decent quality drill. I was in a bind and had to mix a bucket of thinset and it did just fine. I know it's not intended for that, but I was in a bind.

I have 30GB per month with Rollover. This month, I have 45GB to use with last month's rollover. Even if I did get charged, I won the M18 Fuel Drill/Driver, so I'm sure I still came out ahead. ☺️

Remind me what the scoop with this is? It's a computer at the pro desk that anyone can go lol things up?

Yeah.... You're not missing out. Went to the one today that was scheduled from 11-2 and at 11:05, they weren't even there yet. Bosch really dropped the ball on his one.

I watched almost the whole day. 5GB of data worth. Lol. It was pretty sweet. I'm curious how many other tool reviewers follow suit next time a big manufacturer has everyone out.

Ok. I see it now. I'm anxious to do a head to head myself once I get the Milwaukee.