Jump to content

Milwaukee Tools experience


Heyerick Tools

Recommended Posts

They are good big box store tools, like Dewalt and Makita. On average, they are on par with those two. They do cordless lighting better than just about everyone but that's really the only category they clearly lead in the 18/20v arena; maybe in reciprocating saws as well. They are good about putting rafter hooks on stuff if that matters to you.

 

They do 10.8/12v better than just about every one else though.

 

I am in the m12 system and it's pretty good, but I do not like most m18 tools I have tried. That is totally preference though. Your mileage may vary.

  • Thanks 1
Link to comment
Share on other sites

I've never been there.  Maybe one day...

 

 

 

 

 

 

 

 

 

 

 

Seriously, though, a lot of American tool users and enthusiasts seem to go for either Milwaukee or DeWalt, with Makita and Bosch trailing those two in terms of popularity.  You have only to walk into Home Depot to see how the first two brands have taken over so much of the tool section, to include hand tools like hammers and tape measures.

 

I'm a DeWalt fan but do own a few Fuel tools (d-handle rotary hammer, high torque impact, circular saw).  Those tools are all very good, and had I bought those before spending thousands for yellow tools I might be a Milwaukee guy instead.  

  • Thanks 1
Link to comment
Share on other sites

Great town, check out the zoo and Miller brewery and if the brewers are in town check out Miller park it's a nice place too

 

 

Or did you mean the tool company? Be specific and you'll get some good answers

 

Sent from my iPad using Tapatalk

 

  • Thanks 1
  • Haha 1
Link to comment
Share on other sites

I have a lot of Milwaukee tools and I love them. I gave my dad a few Milwaukee tools and got him started in their line, but he has had a few issues and is losing faith. I use my tools at work weekly and have only had 1 issue where I had to return my One Key hammer drill under warranty (they were outstanding during that process too). He uses his tools monthly at best for home repairs and currently has a bad 4.0 M18 battery, a bad trigger in a M12 fuel drill and now the M18 brushed hammer drill I gave him is making a nasty noise in the chuck.  I am going to send the tools in for him as they are both under warranty and check on the battery.

 

Long story short, no matter what brand you research you will find someone who loves them and someone ready to give up on them.  Figure out which tools you need, how often you will use them, any that you may want to pickup down the road, a budget and see which brand makes sense. Milwaukee, Dewalt, Bosch and Makita are all comparable brands for regular use tools. If you are only going to use your tools occasionally check out Ryobi, Ridgid or Porter Cable. 

  • Like 2
Link to comment
Share on other sites

56 minutes ago, Dano123 said:

Long story short, no matter what brand you research you will find someone who loves them and someone ready to give up on them.  Figure out which tools you need, how often you will use them, any that you may want to pickup down the road, a budget and see which brand makes sense. Milwaukee, Dewalt, Bosch and Makita are all comparable brands for regular use tools. If you are only going to use your tools occasionally check out Ryobi, Ridgid or Porter Cable. 

 

This.

 

When I was starting out, what made the difference for me was the 5 year warranty that Milwaukee offers and their eRepair program where they pay for shipping both ways.  I got burned in the past buying a bosch drill and having it crap out after a year and a half of sitting on the shelf in the garage only to find out it only had a 1 year warranty.

Link to comment
Share on other sites

I agree, Milwaukee has one of the best warranty programs for sure. They will also warranty tools without a receipt based on the build date. Ridgid has a lifetime warranty, but you have to follow every step to qualify.

Link to comment
Share on other sites

51 minutes ago, Dano123 said:

I agree, Milwaukee has one of the best warranty programs for sure. They will also warranty tools without a receipt based on the build date. Ridgid has a lifetime warranty, but you have to follow every step to qualify.

Not from personal experience, but doesn't Hilti really have the best warranty? Food for thought.

 

My experience with Milwaukee is because they have my trade requirements fulfilled more than i ever could have asked for, with specific tools that no one else has, so it's a no brainer to use their platform and grow with their tools, which I really do like. I have, however, wandered into Ryobi and Makita for the same reason i'm with milwaukee, in that they make specific tools no one else does. 

Honestly, I've had great success with dozens and dozens of milwaukee tools, and there's no way i would switch brands just because of one different feature or 5% more power than my milwaukee drills or something. 

Great brand, great warranty, no complaints.

 

Link to comment
Share on other sites

On 8/5/2017 at 2:08 PM, KnarlyCarl said:

Not from personal experience, but doesn't Hilti really have the best warranty? Food for thought.

 

My experience with Milwaukee is because they have my trade requirements fulfilled more than i ever could have asked for, with specific tools that no one else has, so it's a no brainer to use their platform and grow with their tools, which I really do like. I have, however, wandered into Ryobi and Makita for the same reason i'm with milwaukee, in that they make specific tools no one else does. 

Honestly, I've had great success with dozens and dozens of milwaukee tools, and there's no way i would switch brands just because of one different feature or 5% more power than my milwaukee drills or something. 

Great brand, great warranty, no complaints.

 

 

Kind of a different animal there though.

Link to comment
Share on other sites

On 8/5/2017 at 2:08 PM, KnarlyCarl said:

Not from personal experience, but doesn't Hilti really have the best warranty? Food for thought.

 

My experience with Milwaukee is because they have my trade requirements fulfilled more than i ever could have asked for, with specific tools that no one else has, so it's a no brainer to use their platform and grow with their tools, which I really do like. I have, however, wandered into Ryobi and Makita for the same reason i'm with milwaukee, in that they make specific tools no one else does. 

Honestly, I've had great success with dozens and dozens of milwaukee tools, and there's no way i would switch brands just because of one different feature or 5% more power than my milwaukee drills or something. 

Great brand, great warranty, no complaints.

 

I have heard Hilti has a great warranty too.

Link to comment
Share on other sites

  • 1 month later...
Great town, check out the zoo and Miller brewery and if the brewers are in town check out Miller park it's a nice place too
 
 
Or did you mean the tool company? Be specific and you'll get some good answers
 
Sent from my iPad using Tapatalk
 


Pretty sure the post title says tools. And we are on a tool forum so it could be assumed he was talking about tools and not a town. Just say'n.:rolleyes:


Mike.
_______________
[emoji631] [emojiyeq]
Link to comment
Share on other sites

Is it just me, or does the Milwaukee section seem to have more "I have a problem with this tool...broken tool" posts than the other sections?

 

There's about 30% less posts in the Milwaukee section than the Dewalt section but it seems there's more reported tool problems. It's just a really loose observation and I wondered if anyone else is noticing this. I certainly wouldn't suggest others take this into consideration when choosing a platform (it's not quantitative at all, so probably unfair), but I actually did a little when I was choosing. Some posts could also be fake/paid trolls from the competition, as a lot of "problem" posts are first posts from new accounts.

 

Also, what's with most Milwaukee tools being heavier than the competition? Did the marketing department find that people usually think a tool is a higher quality when it's heavier, so they ran with this? I've heard people say a tool feels solid/tough because it's heavy (even an online tool reviewer). I would think heavier does not always mean tougher, but it might in Milwaukee's case.

 

Marketing tactic? Inability to make lighter tools than the competition? Heavier materials? More copper in their motors?

 

I would love to see a power-to-weight ratio  comparison between a few drills.

  • Like 3
Link to comment
Share on other sites

On 8/7/2017 at 11:03 AM, BMack37 said:

 

Kind of a different animal there though.

I like different! 

 

But speaking of Milwaukee tools, my hole hawg is acting up..... Uh oh.... Trigger has a dead spot.... But it's a painless warranty process like I've said before

  • Like 1
Link to comment
Share on other sites

one place that I worked at had mostly all Milwaukee tools and I've had a good experience with them they are a great tool brand the only problem we had was with a recip saw that we only had for a few days and it just quit on us but Milwaukee customer service took care of it. 

Link to comment
Share on other sites

  • 2 weeks later...

I use my Fuel stuff professionally, all day every day, and have not had a single problem with any of them. Most were bought within a week of their release, so some have over 3 years of daily pro use on them. I'm not the fanboy type, at all - they just had the models that suited my trade the best when I was looking to upgrade. They still do, by far.

Link to comment
Share on other sites

  • 3 weeks later...
On 18-9-2017 at 6:51 AM, calidecks said:

 


Pretty sure the post title says tools. And we are on a tool forum so it could be assumed he was talking about tools and not a town. Just say'n.:rolleyes:


Mike.
_______________
emoji631.png [emojiyeq]

I adjusted the title after the reaction. It was not so clear before :)

Link to comment
Share on other sites

  • 2 years later...

hi mates, i'm planning to buy a sets of Milwaukee power tools. I heard a lot of good review about the durability, quality and performance of this brand. I'm thinking to buy from this store in sydney because they specialise in tools. Can you guys suggest me what are the best power tool sets here is the list. Thanks to all that will comment.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Member Statistics

    16,553
    Total Members
    6,555
    Most Online
    Bill Rade
    Newest Member
    Bill Rade
    Joined
×
×
  • Create New...