rrich1 Posted February 3, 2018 Report Share Posted February 3, 2018 I’ve got the Veritas and everybody says the LN is better. Grrrrr. That Rabbet plane will do some heavy tenon work for me and I might get a second blade and camber the corners and use it as an extra large smoother. Not holding my little bit for over a month SUCKED. But this weekend we watched some tv and he crawled up in my lap for a hug. Now I can pick the squirt up all day long though truthfully I need to start working out, it’s amazing how weak I still am. I have the veritas as well. Might sell it for the LN. Makes sense on the plane. Glad everything is going better for you. Sent from my Pixel XL using Tapatalk Quote Link to comment Share on other sites More sharing options...
jtkendall Posted February 13, 2018 Report Share Posted February 13, 2018 On 1/31/2018 at 2:43 PM, BMack37 said: You, Chris, khariV and the Kendalls have me drooling over planes! I’ve yet to use any of my planes. The Apron Plane from Veritas still needs to be wiped down with mineral spirits and the three Millers Falls are apart but sitting in totes until I get around to cleaning them up. I’ve been so busy with work that all of my woodworking plans have been set aside so I can complete the project. I hope to have a break after this week where I can get started on the Millers Falls restorations and build some Wood Whisperer shaker tables… and a workbench. 1 Quote Link to comment Share on other sites More sharing options...
tugnut1 Posted February 13, 2018 Report Share Posted February 13, 2018 This is an awesome topic. I'm sure I am going to add to this one more than once, but right off of the top of my head, I want to add the Rockler Corner Clamp jig. It has made making box type units super easy. 3 Quote Link to comment Share on other sites More sharing options...
tugnut1 Posted February 13, 2018 Report Share Posted February 13, 2018 OOH, I have another item to add. I love the Magswitch magnetic featherboard. I use it all of the time because it is easy to use and very quick to adjust. 3 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted February 13, 2018 Report Share Posted February 13, 2018 I’ve got the narrower mag switch board, absolutely love it. 1 Quote Link to comment Share on other sites More sharing options...
WigWagWorkshop Posted February 13, 2018 Report Share Posted February 13, 2018 Honestly, one tool I could not live without, even though it's not used to often, is a BFH! 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted February 13, 2018 Report Share Posted February 13, 2018 1 hour ago, WigWagWorkshop said: Honestly, one tool I could not live without, even though it's not used to often, is a BFH! may I ask what a BFH is? Quote Link to comment Share on other sites More sharing options...
WigWagWorkshop Posted February 14, 2018 Report Share Posted February 14, 2018 1 hour ago, Jronman said: may I ask what a BFH is? Sorry, my apologizes "Big F*ckin' Hammer" 2 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted February 14, 2018 Author Report Share Posted February 14, 2018 7 hours ago, WigWagWorkshop said: Honestly, one tool I could not live without, even though it's not used to often, is a BFH! I have a few of those myself. I don't use the 3lb a lot but I use my dead blows and one engineering hammer often. Now that I'm making mallets, the deadblows might get used less. I really like my little 12oz that I just made. I need to make a bigger-faced lightweight mallet. 1 Quote Link to comment Share on other sites More sharing options...
justinkendall Posted February 14, 2018 Report Share Posted February 14, 2018 On 1/31/2018 at 3:11 AM, BMack37 said: Concave sanding pads, also available on convex and other shapes. Available at Rockler, Amazon, eBay. Under $10 Lee Valley has a 15pc set (6 convex, 5 concave, and 4 angled) for only $15.90. 1 Quote Link to comment Share on other sites More sharing options...
khariV Posted February 14, 2018 Report Share Posted February 14, 2018 1 hour ago, justinkendall said: Lee Valley has a 15pc set (6 convex, 5 concave, and 4 angled) for only $15.90. Lee Valley also has free shipping going on right now until Feb, 21. (not that anyone needs another reason, but there it is.) 1 Quote Link to comment Share on other sites More sharing options...
justinkendall Posted February 14, 2018 Report Share Posted February 14, 2018 4 hours ago, khariV said: Lee Valley also has free shipping going on right now until Feb, 21. (not that anyone needs another reason, but there it is.) It's only on orders of $40 or more though so now is a good time to pickup a set of card scrapers and bench dogs as well. Quote Link to comment Share on other sites More sharing options...
BMack37 Posted February 15, 2018 Author Report Share Posted February 15, 2018 13 hours ago, justinkendall said: Lee Valley has a 15pc set (6 convex, 5 concave, and 4 angled) for only $15.90. Nice find! Quote Link to comment Share on other sites More sharing options...
tugnut1 Posted February 15, 2018 Report Share Posted February 15, 2018 Oh man, I just thought of another thing. Parallel Clamps. I use them all of the time. I've got Bessey Revo clamps and some Jorgensens. Unfortunately, Jorgensen went out of business recently. As a matter of fact, I just noticed today that Bessey has come out with a new set of parallel clamps. They improved on their K Body Revo clamps and they are calling them the K Body REVOlution. I don't believe they are available yet, but when they are, I am getting some for sure. http://kbodyrevolution.besseytools.com/ Quote Link to comment Share on other sites More sharing options...
khariV Posted February 15, 2018 Report Share Posted February 15, 2018 2 hours ago, tugnut1 said: Oh man, I just thought of another thing. Parallel Clamps. I use them all of the time. I've got Bessey Revo clamps and some Jorgensens. Unfortunately, Jorgensen went out of business recently. As a matter of fact, I just noticed today that Bessey has come out with a new set of parallel clamps. They improved on their K Body Revo clamps and they are calling them the K Body REVOlution. I don't believe they are available yet, but when they are, I am getting some for sure. http://kbodyrevolution.besseytools.com/ I might take another look at Bessey clamps when these come out if I can lay my hands on some. I really and truly dislike the existing Bessey K Body clamps. The release mechanism in the lever on the ones that I had was always sticking and really difficult to engage and release without picking up and moving my entire work piece, which of course moved things enough that everything shifted out of alignment. I ended up selling them and switching over to Jets. 1 Quote Link to comment Share on other sites More sharing options...
tugnut1 Posted February 16, 2018 Report Share Posted February 16, 2018 18 hours ago, khariV said: I might take another look at Bessey clamps when these come out if I can lay my hands on some. I really and truly dislike the existing Bessey K Body clamps. The release mechanism in the lever on the ones that I had was always sticking and really difficult to engage and release without picking up and moving my entire work piece, which of course moved things enough that everything shifted out of alignment. I ended up selling them and switching over to Jets. I've had the same issues with the besseys. I think it has a lot to do with the grooves they cut in the bar to help the jaws bite in. I bought a couple Jorgensens right before they went out of business and I really like them. I haven't tried the Jet clamps yet. Quote Link to comment Share on other sites More sharing options...
rrich1 Posted February 17, 2018 Report Share Posted February 17, 2018 I have some besseys and a few jets from their Thanksgiving sale. The Jets are much much better. I'd love to get all jets. But having to wait once a year for any type of sale really sucks. A good workbench and vise are very underrated until you have them. They make life so much easier and open up a lot of things you can do. If you have the room build a good solid bench with vises. Sent from my Pixel XL using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jronman Posted March 23, 2018 Report Share Posted March 23, 2018 My bottle of CMT cleaner is a top contender. Using it to clean off caked on wood off my bits/blades is very nice. I sometimes I also use it to do a quick wipe on other tools/power tools that are needing cleaned. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.