rrich1 Posted October 28, 2015 Report Share Posted October 28, 2015 Went to HD and they had gotten two sets in that day as well as a bottom that was already sold. Decided to bite the bullet at the price of $698 plus tax. Got it loaded up and took it home. Took out the bottom box last night and got the rest set up today. Still transitioning stuff from the old box to the new one. At work now so I will finish it up later. I'm sure I'll be moving stuff around multiple times before I'm happy with it. It is a big step up from my Craftsman box. Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Poisonfangs85 Posted October 28, 2015 Report Share Posted October 28, 2015 Awesome box bro! Looks like the craftsman is showing itself to the door, haha. Quote Link to comment Share on other sites More sharing options...
jbw55 Posted October 28, 2015 Report Share Posted October 28, 2015 oh man I'm jealous, congrats and enjoy that bad boy!!! I'm still kicking around to get one or not due to ceiling height in my tool shed...... Question for you.....Can the top lid be removed?? Quote Link to comment Share on other sites More sharing options...
rrich1 Posted October 28, 2015 Author Report Share Posted October 28, 2015 oh man I'm jealous, congrats and enjoy that bad boy!!! I'm still kicking around to get one or not due to ceiling height in my tool shed......Question for you.....Can the top lid be removed??From what I remember it looked to have a long piano hinge held on my bolts. I'll take a closer look in a few hours when I go on lunch and get back to you. Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
rrich1 Posted October 28, 2015 Author Report Share Posted October 28, 2015 This week Menard's has their 11% off sale. I printed off a rebate match form and am going to send it in. Hopefully it will be accepted which would make this box an even more of a killer deal after the rebate. Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
jbw55 Posted October 28, 2015 Report Share Posted October 28, 2015 From what I remember it looked to have a long piano hinge held on my bolts. I'll take a closer look in a few hours when I go on lunch and get back to you.Sent from my XT1254 using TapatalkAppreciate that.... Quote Link to comment Share on other sites More sharing options...
DR99 Posted October 28, 2015 Report Share Posted October 28, 2015 That is on the list of things I want to get is a bigger toolbox my current one is like yours a tiny little Craftsman Congrats on your new purchase!!! Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted October 28, 2015 Report Share Posted October 28, 2015 That is on the list of things I want to get is a bigger toolbox my current one is like yours a tiny little Craftsman Congrats on your new purchase!!! same here Jason this Bebe is on my wish list this one or the husky but more this one Big congrats on the awesome milwaukee box rrich!! Quote Link to comment Share on other sites More sharing options...
comp56 Posted October 28, 2015 Report Share Posted October 28, 2015 awesome box.....congrats.... Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted October 28, 2015 Report Share Posted October 28, 2015 That crafstman looks like a toolbox for munchkins next to that Milwaukee.JimboSent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
BMack37 Posted October 28, 2015 Report Share Posted October 28, 2015 That toolbox is sickkkk. Soo nice, I'm jealous! Quote Link to comment Share on other sites More sharing options...
rrich1 Posted October 28, 2015 Author Report Share Posted October 28, 2015 Appreciate that....It has a long hinge but it is riveted in. I wouldn't want to take them out. Thanks everyone. Milwaukee def did right with this box. Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
JerryNY Posted October 28, 2015 Report Share Posted October 28, 2015 Hey congrats on the new box, I hope you enjoy yours as much as I do mine! Quote Link to comment Share on other sites More sharing options...
JerryNY Posted October 28, 2015 Report Share Posted October 28, 2015 oh man I'm jealous, congrats and enjoy that bad boy!!! I'm still kicking around to get one or not due to ceiling height in my tool shed...... Question for you.....Can the top lid be removed??You could just put bumpers on the lid where it would contact the ceiling or alternatively attach a bungee to the loop inside the lid to the pegboard inside to limit the ROM of the lid... Quote Link to comment Share on other sites More sharing options...
rrich1 Posted October 28, 2015 Author Report Share Posted October 28, 2015 Hey congrats on the new box, I hope you enjoy yours as much as I do mine!Question...I got a strip of pad with sticky on the back. What is that used for? To attach the top pads to keep from moving?Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
jbw55 Posted October 28, 2015 Report Share Posted October 28, 2015 It has a long hinge but it is riveted in. I wouldn't want to take them out. IMG_20151027_234608453.jpgThanks everyone. Milwaukee def did right with this box.Sent from my XT1254 using TapatalkThanks for the info..... Quote Link to comment Share on other sites More sharing options...
jbw55 Posted October 28, 2015 Report Share Posted October 28, 2015 You could just put bumpers on the lid where it would contact the ceiling or alternatively attach a bungee to the loop inside the lid to the pegboard inside to limit the ROM of the lid...That or attach them to the 2 x 4.....As you can see from the picture things are tight, and after re- measuring everything it looks like I have a bit over 68 inches from the floor to the top plate so this gives me just enough space to fit the tool box with the lid open all the way but with out the wheels......however that's measuring the vertical, then there are the two angles of the lid which adds approx. 4 more inches of height but when I take in account for the roof angle it appears the lid will need to be closed only about 2 1/2 inches.....overall I think I could live with the situation...... Quote Link to comment Share on other sites More sharing options...
Poisonfangs85 Posted October 28, 2015 Report Share Posted October 28, 2015 That or attach them to the 2 x 4.....As you can see from the picture things are tight, and after re- measuring everything it looks like I have a bit over 68 inches from the floor to the top plate so this gives me just enough space to fit the tool box with the lid open all the way but with out the wheels......however that's measuring the vertical, then there are the two angles of the lid which adds approx. 4 more inches of height but when I take in account for the roof angle it appears the lid will need to be closed only about 2 1/2 inches.....overall I think I could live with the situation......toolshed124.JPGIt's tight but looks well organized. I think I'm going to have to steal your idea of hanging the Milwaukee zipper pouches. Just ring clips on a piece of wood? Can't tell from the pic. Quote Link to comment Share on other sites More sharing options...
JerryNY Posted October 28, 2015 Report Share Posted October 28, 2015 Question...I got a strip of pad with sticky on the back. What is that used for? To attach the top pads to keep from moving?Sent from my XT1254 using TapatalkYeah I think so, I didn't bother using it, the texture of the toolbox's powdercoat is practically like sandpaper so I don't see the pad moving much but maybe if you were just using the bottom box with the included pad it might make it more secure. Quote Link to comment Share on other sites More sharing options...
JerryNY Posted October 28, 2015 Report Share Posted October 28, 2015 That or attach them to the 2 x 4.....As you can see from the picture things are tight, and after re- measuring everything it looks like I have a bit over 68 inches from the floor to the top plate so this gives me just enough space to fit the tool box with the lid open all the way but with out the wheels......however that's measuring the vertical, then there are the two angles of the lid which adds approx. 4 more inches of height but when I take in account for the roof angle it appears the lid will need to be closed only about 2 1/2 inches.....overall I think I could live with the situation...... toolshed124.JPGIt looks like it might be a nice spot for a skylight to let a little sunshine on your Milwaukee box and give a little more headroom, that or put a nice new gable on that side of the shed Quote Link to comment Share on other sites More sharing options...
jbw55 Posted October 28, 2015 Report Share Posted October 28, 2015 It's tight but looks well organized. I think I'm going to have to steal your idea of hanging the Milwaukee zipper pouches. Just ring clips on a piece of wood? Can't tell from the pic.Its about as good as I can get with the limited space. Replacing the three craftsman stacks with two Milwaukee stacks will actually gain me a bit more drawer space so things could be bettered yet......The hooks are just large cup hooks attached to a piece of wood, works well for my needs and takes far less room, plus I'm not fond of keeping my cordless stuff in the tool box drawers, loose lot's of space. Quote Link to comment Share on other sites More sharing options...
jbw55 Posted October 28, 2015 Report Share Posted October 28, 2015 It looks like it might be a nice spot for a skylight to let a little sunshine on your Milwaukee box and give a little more headroom, that or put a nice new gable on that side of the shed Ha.....funny thing is when I got the shed I had the choice of a different roof lay out and taller, I know better next time I guess Quote Link to comment Share on other sites More sharing options...
chewie17 Posted October 28, 2015 Report Share Posted October 28, 2015 I wish I could get one for $700..... just checked out the local store. it is $570 for the bottom and $450 for the top... Quote Link to comment Share on other sites More sharing options...
rrich1 Posted October 28, 2015 Author Report Share Posted October 28, 2015 I wish I could get one for $700..... just checked out the local store. it is $570 for the bottom and $450 for the top...It's 698 now on the website. I would go back and have them look it up. Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
chewie17 Posted October 28, 2015 Report Share Posted October 28, 2015 That's not the Canadian price though is it?Sent from my B15 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.