99_XC600 Posted November 29, 2015 Report Share Posted November 29, 2015 I did notice that 99 I was loading the drawers up and thought to myself maybe a little bit of weight would help but there still kinda hard to open still, what's your secret? If you pull the drawer out and look into the cabinet you will see 2 rubber pawls that the end of the slide will lock into. Since they are rubber and dry, there's a lot of friction on them when they go to close. I grabbed some white lithium grease and a acid brush and and put some grease on them. Once I did that they close perfectly. I also lubricated all of the slides while I was at it and that also helped a lot. Here's a video that I made that walks you through the entire process. 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted November 29, 2015 Report Share Posted November 29, 2015 Swing by HD today to pick up some stain. They still had the 2 pack of 25' Dewalt tape measures for $14.88 so I snagged one.I already have the same tape and I like it. Can't beat $7.44 each and you can't have too many 25' tape measuresThe Dewalt is my favorite and go too tape now, I love how it has the fractional measurements printed so when you have those moments you don't look like a dummy lol.JimboSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
rfwjr Posted November 29, 2015 Report Share Posted November 29, 2015 Nice score Bigmike. That is a nice toolbox man. I did not go out and do any Black Friday shopping. Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted November 29, 2015 Author Report Share Posted November 29, 2015 If you pull the drawer out and look into the cabinet you will see 2 rubber pawls that the end of the slide will lock into. Since they are rubber and dry, there's a lot of friction on them when they go to close. I grabbed some white lithium grease and a acid brush and and put some grease on them. Once I did that they close perfectly. I also lubricated all of the slides while I was at it and that also helped a lot.Here's a video that I made that walks you through the entire process. Thanks 99 awesome video this is gonna help a lot. Quote Link to comment Share on other sites More sharing options...
99_XC600 Posted November 30, 2015 Report Share Posted November 30, 2015 I splurged and picked up a Husky Bucket Jockey this morning. For $7.00, you can't beat it. http://www.homedepot.com/p/Husky-Bucket-Jockey-82079N14/205171909 1 Quote Link to comment Share on other sites More sharing options...
comp56 Posted November 30, 2015 Report Share Posted November 30, 2015 I didn't get anything for black friday.........I usually wait for boxing day Dec 26th.... Quote Link to comment Share on other sites More sharing options...
Santi_78342 Posted December 2, 2015 Report Share Posted December 2, 2015 This was part of my Black Friday shopping. Tomorrow will bring a bunch of goodies as well...can't wait! Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted December 2, 2015 Author Report Share Posted December 2, 2015 This was part of my Black Friday shopping. Tomorrow will bring a bunch of goodies as well...can't wait!. Oh now that's nice!! Congrats Santi and let us know how u like it, I wouldn't mind getting one of those! Quote Link to comment Share on other sites More sharing options...
Santi_78342 Posted December 2, 2015 Report Share Posted December 2, 2015 . Oh now that's nice!! Congrats Santi and let us know how u like it, I wouldn't mind getting one of those!It's definitely a little bulkier than I expected but I can't wait to try this sucker out! Quote Link to comment Share on other sites More sharing options...
BMack37 Posted December 2, 2015 Report Share Posted December 2, 2015 It's definitely a little bulkier than I expected but I can't wait to try this sucker out! That's what she said? 2 Quote Link to comment Share on other sites More sharing options...
Santi_78342 Posted December 3, 2015 Report Share Posted December 3, 2015 Some more Black Friday/Cyber Monday Hauls:- (2) L-Boxx-1s- L-Boxx-3- L-Boxx-4 - M12 Fuel Hackzall- M18 Fuel 3/8 Impact WrenchStill missing another L-Boxx-4 (not sure why it was shipped seperately), a Crain Metal Mitre, and a couple pairs of Duluth Trading Company DuluthFlex Fire Hose Carpenter Pants. 2 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted December 3, 2015 Author Report Share Posted December 3, 2015 Wow Santi great haul man!! Those are some nice tools u picked up! Quote Link to comment Share on other sites More sharing options...
BMack37 Posted December 3, 2015 Report Share Posted December 3, 2015 Two Cyber Monday items came in, from Amazon Warehouse. These two Knipex pieces cost me out of pocket $13 total! They were a little dirty when i took the picture but they look better after a wipe down with WD40. 2 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted December 3, 2015 Author Report Share Posted December 3, 2015 $13bucks total?!? NICE!! 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted December 3, 2015 Report Share Posted December 3, 2015 Still waiting on mine to shipJimboSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
BMack37 Posted December 3, 2015 Report Share Posted December 3, 2015 Yeah Mike, I totally lucked out. Fully disclosure the cost was about $13 a piece but I had CC reward points to cut that in half...still well over 50% off! Just goes to show that you have to jump on those warehouse deals and don't worry about condition. Jimbo, I'm still waiting for those particular Knipex to ship also. One(The same pliers I believe you ordered) of the three finally received updated shipping info yesterday, should be here Monday. I imagine you will have yours by the end of December, I've seen others have already received their pliers...but what's weird is that two of the pliers I'm waiting for are the same pliers but I only received updated info on the one piece. Quote Link to comment Share on other sites More sharing options...
kruton Posted December 3, 2015 Report Share Posted December 3, 2015 I will have to check to see if mine have any shipping info yet.Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
BMack37 Posted December 4, 2015 Report Share Posted December 4, 2015 I actually received shipping updates for second of my electronic pliers today. The second one is supposed to be delivered tomorrow, the first one is supposed to be delivered Monday. If they're doing orders by day; I believe Jimbo's should be updated soon, think he ordered the 23rd, I ordered the 22nd. I imagine you ordering on the 30th might delay yours but at least you know they're shipping. ...I have to imagine they have sold a LOT of them, it's a ridiculous price and it's still that price! I thought we'd have to wait a month or two, that's how long I had to wait for my Nupla dead blow hammer. Quote Link to comment Share on other sites More sharing options...
MikeyB Posted December 4, 2015 Report Share Posted December 4, 2015 Real nice haul you guys Quote Link to comment Share on other sites More sharing options...
MikeyB Posted December 4, 2015 Report Share Posted December 4, 2015 If you pull the drawer out and look into the cabinet you will see 2 rubber pawls that the end of the slide will lock into. Since they are rubber and dry, there's a lot of friction on them when they go to close. I grabbed some white lithium grease and a acid brush and and put some grease on them. Once I did that they close perfectly. I also lubricated all of the slides while I was at it and that also helped a lot. Here's a video that I made that walks you through the entire process. Great video 99, and looks like you got a nice spread of tools to fill that box with ... Very cool Quote Link to comment Share on other sites More sharing options...
99_XC600 Posted December 4, 2015 Report Share Posted December 4, 2015 Great video 99, and looks like you got a nice spread of tools to fill that box with... Very cool Thanks - I tell my wife that we don't need to hire a mechanic/plumber/carpenter and that we can do it ourselves which allows me to buy more tools. It's just a massive Jedi mind trick that I play with her. Quote Link to comment Share on other sites More sharing options...
Santi_78342 Posted December 4, 2015 Report Share Posted December 4, 2015 Thanks - I tell my wife that we don't need to hire a mechanic/plumber/carpenter and that we can do it ourselves which allows me to buy more tools.It's just a massive Jedi mind trick that I play with her. Lol it's nice to see I'm not the only one who uses that trick! Quote Link to comment Share on other sites More sharing options...
madman_us Posted December 4, 2015 Report Share Posted December 4, 2015 here is my late BF shopping at HomeDepotthose are all marked down items Quote Link to comment Share on other sites More sharing options...
rrich1 Posted December 4, 2015 Report Share Posted December 4, 2015 here is my late BF shopping at HomeDepotthose are all marked down itemsI almost bought both sets of clamps. I just bought a six pack of Irwin clamps for $15 at ace and not sure if I need any smaller clamps. Sent from my XT1254 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted December 4, 2015 Author Report Share Posted December 4, 2015 Nice buys Alex!! I'm hoping to get off early enough to stop by there today. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.