BMack37 Posted March 12, 2016 Report Share Posted March 12, 2016 That looks like REALLY nice set. Too bad they didn't throw some hex bits in there too. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted March 12, 2016 Author Report Share Posted March 12, 2016 That looks like REALLY nice set. Too bad they didn't throw some hex bits in there too. Yea but I got pretty excited to see that, hand it has a new version of their magnetic sleeve as well, I have the big one have never seen this little guy. Jimbo Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
BMack37 Posted March 12, 2016 Report Share Posted March 12, 2016 4 minutes ago, JimboS1ice said: Yea but I got pretty excited to see that, hand it has a new version of their magnetic sleeve as well, I have the big one have never seen this little guy. Jimbo Sent from my iPad using Tapatalk I almost bought the stand alone little guy this weekend, very good idea. I like the little magnet more than the larger bit holder one, because that one is soo wide. This one you can slide off if you need the room and in the process of sliding it off it will help magnetize the bit. Though Makita's bits seem to hold their magnetism well so it's not really an issue with their bits. I hope we see more bit sets from them, they really are the best bits at HD/Lowe's. Hoping some people look past the price, also hoping Makita is smart enough to ADVERTISE that they're the ONLY bits available at HD/Lowe's that are not made in China. Quote Link to comment Share on other sites More sharing options...
Stercorarius Posted March 12, 2016 Report Share Posted March 12, 2016 So I swore off buying tools for the next couple months. And now I'm broke because I bought this sweet Nebo light that's brighter than my maglites and fits in the palm of your hand and clips onto your hat brim. Charges with the same USB plug as my phone too! I blame autoparts stores for that purchase. I blame Knarlycarl for my next purchase because I refuse to take responsibility for my actions. I picked up one of the last Husky tool boxes I've had my eye on for months. 6 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted March 12, 2016 Report Share Posted March 12, 2016 Being tool broke sucks dude. I cry when I'm tool broke..... 2 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted March 12, 2016 Report Share Posted March 12, 2016 Ok sure blame me, I told you peer pressure isn't a good thing! But that box is pretty, I think if I was there to see it in person, I would have hesitated even less than I did ha! Well, gotta start making more dough, with all these tools you supply yourself instead of your boss supplying, you should be making more than you do Sent from my SCH-I535 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Kato Posted March 12, 2016 Report Share Posted March 12, 2016 On 3/11/2016 at 11:14 PM, JimboS1ice said: Been wanting some hex shank bits, you'll see these Monday Jimbo Sent from my iPhone using Tapatalk I've had my eye on these, you have to let us know how you like them after you use them. 2 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted March 12, 2016 Report Share Posted March 12, 2016 Andrull got me the info for irwin bluegroove power bits so i bought a set from U.K. and they came. really looking to see them survive multiple times would run through nails normally with regular speedbormax as are able take nail-embedded wood. . . Sent from my SCH-I535 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted March 12, 2016 Author Report Share Posted March 12, 2016 Carl how much did they set you back? I dorm recommend it but the soles ores went throw that light guage steel really with no effort, just out of curiousity. Jimbo Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted March 12, 2016 Report Share Posted March 12, 2016 Carl how much did they set you back? I dorm recommend it but the soles ores went throw that light guage steel really with no effort, just out of curiousity. Jimbo Sent from my iPhone using Tapatalk Man you reeeeally gotta check your spelling on things, I think I've deciphered your code lol tho You would ask; these cost about $50 ? and they supposedly can take nails, that steel you went through is light gauge and not a problem, I want them to be able to take multiple nails, some will be at an angle, some I may even come down on the head of the nail. Sent from my SCH-I535 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted March 12, 2016 Author Report Share Posted March 12, 2016 Man you reeeeally gotta check your spelling on things, I think I've deciphered your code lol tho You would ask; these cost about $50 [emoji44] and they supposedly can take nails, that steel you went through is light gauge and not a problem, I want them to be able to take multiple nails, some will be at an angle, some I may even come down on the head of the nail. Sent from my SCH-I535 using Tapatalk Just keeping you on edge with this cryptic speech! It's the result of large dumb thumbs on these new age devices without buttons! Either that or my iPhone has a demon living inside it!!! That steel I hit was light gage material and it was only half of the bit so the self feed tip didn't even touch it. I'd hate to see what a nice size nail would do to these! Let us know how they work out for you, I'll have to keep my radar on for these. And of course I would ask would you expect any less?? Jimbo Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
99_XC600 Posted March 13, 2016 Report Share Posted March 13, 2016 Finally scored one of these today. Now I just need to reorganize the garage and make a home of it. 6 Quote Link to comment Share on other sites More sharing options...
John Glassey Posted March 13, 2016 Report Share Posted March 13, 2016 Congrats you to a good one there. Quote Link to comment Share on other sites More sharing options...
Andrull Posted March 15, 2016 Report Share Posted March 15, 2016 Hope they serve you well. But they are not exactly metall drilling bits, so even if they survive, they probably take a beating with some bruises. But being self feeding, they keep on going. So if you can avoid the nail, I still really recommend doing so. And screws (hardened steel) is pretty much game over. Xd Quote Link to comment Share on other sites More sharing options...
Kato Posted March 15, 2016 Report Share Posted March 15, 2016 Had the Titan micro ratchet for a while now, picked up it's twin in 1/4" drive yesterday... Titan Micro 002 by Edward Durbin, on Flickr 5 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted March 15, 2016 Author Report Share Posted March 15, 2016 Those look nice Jimbo Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted March 15, 2016 Report Share Posted March 15, 2016 Good buy anyway. Even if you're broke. I'm contemplating on doing the same thing. Lol Millerz Quote Link to comment Share on other sites More sharing options...
khariV Posted March 15, 2016 Report Share Posted March 15, 2016 Got a couple of One Time Tools from Woodpeckers today. I love the precision and finish, but I do have to admit, I wish they weren't quite so spendy. Sent from my iPhone using Tapatalk 5 Quote Link to comment Share on other sites More sharing options...
John Glassey Posted March 15, 2016 Report Share Posted March 15, 2016 39 minutes ago, khariV said: Got a couple of One Time Tools from Woodpeckers today. I love the precision and finish, but I do have to admit, I wish they weren't quite so spendy. Sent from my iPhone using Tapatalk They look so nice. Good luck with them. 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted March 15, 2016 Author Report Share Posted March 15, 2016 Sweet I was thinking about one until I saw the price Jimbo Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted March 15, 2016 Author Report Share Posted March 15, 2016 Oops I did it again... Jimbo Sent from my iPhone using Tapatalk 5 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted March 15, 2016 Report Share Posted March 15, 2016 You're really starting to catch up to my Knipex collection, this cannot stand! 1 Quote Link to comment Share on other sites More sharing options...
rrich1 Posted March 16, 2016 Report Share Posted March 16, 2016 These came today. Chemical Guys Foam Canon and accessories. Three car washes, upholstery carpet cleaner, scratch remover, a d wash bucket grit catcher. Skip to the 3 min mark or so to see it in action Sent from my XT1254 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
tomdog22 Posted March 16, 2016 Report Share Posted March 16, 2016 Got some goodies today, yeah 4 Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted March 16, 2016 Report Share Posted March 16, 2016 Got a couple of One Time Tools from Woodpeckers today. I love the precision and finish, but I do have to admit, I wish they weren't quite so spendy. Sent from my iPhone using Tapatalk They're high priced. I've looked at the too. You can't go wrong with these other than the price and it getting into the wrong hands. Lol Millerz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.