Jronman Posted November 17, 2017 Report Share Posted November 17, 2017 This guy arrived today... and a couple cabinet pulls. Interestingly enough the cabinet pull actually came with long screws. So many times you buy cabinet pulls and the provided screws are too short. The GRS-16 has 4 threaded screw holes not sure why. Curious if they are for anything. Anyone know? Would seem like wasted work to drill and tap 4 screw holes if they are to be used for nothing. There was a thankyou note in the box for buying the GRS-16 and it had some interesting info. During the manufacturing process the squares are not color matched which means no two squares are the same color. 1 Quote Link to comment Share on other sites More sharing options...
dwain Posted November 17, 2017 Report Share Posted November 17, 2017 6 hours ago, Jronman said: @Tug how many rotary hammers do you have now. I'll bet not as many as oztooltalk Currently have 12 (10 cordless, 2 electric) Be posting this review tonight: 5 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted November 17, 2017 Report Share Posted November 17, 2017 Some layout and a finish sanding blocks, should help the finishing of clip boards and other stuff. 2 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted November 17, 2017 Report Share Posted November 17, 2017 8 hours ago, rrich1 said: Pics for reference on size. I was really wanting these. Sent from my Pixel XL using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Tug Posted November 17, 2017 Report Share Posted November 17, 2017 6 hours ago, Jronman said: @Tug how many rotary hammers do you have now. Four, not including the little Ryobi because it's garbage. Each has its own characteristics and qualities that it brings to the table. Quote Link to comment Share on other sites More sharing options...
Tug Posted November 17, 2017 Report Share Posted November 17, 2017 21 minutes ago, dwain said: I'll bet not as many as oztooltalk Currently have 12 (10 cordless, 2 electric) Be posting this review tonight: Roll-on tonight! I take it you guys pay for the sleepers and clean up your mess when you're done? You'll have to shoot a "behind the scenes" vid soon! Quote Link to comment Share on other sites More sharing options...
dwain Posted November 17, 2017 Report Share Posted November 17, 2017 6 hours ago, Tug said: I take it you guys pay for the sleepers and clean up your mess when you're done? Correct. Fortunately my cousin owns the sleeper place so I get a good deal 1 1 Quote Link to comment Share on other sites More sharing options...
rfwjr Posted November 17, 2017 Report Share Posted November 17, 2017 I picked this up last week. Just wanted the 2 batteries so I would have extra for the Ryobi Airstrike, work light, and inflator/deflator I got. But they had a deal where if you bought the hammer drill you could get the 2 - 4 Ah batteries for free. The drill does not really fit in with all the other yellow cordless tools I own. 2 Quote Link to comment Share on other sites More sharing options...
rrich1 Posted November 17, 2017 Report Share Posted November 17, 2017 Thanks. Those do look small. I've got girl sized hands so I might still like them lol. Sent from my Pixel XL using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted November 17, 2017 Author Report Share Posted November 17, 2017 Some layout and a finish sanding blocks, should help the finishing of clip boards and other stuff.I have that incra ruler I love itSent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Tx_woodworker Posted November 17, 2017 Report Share Posted November 17, 2017 This is all I bought todayI’m cutting the cord 7 Quote Link to comment Share on other sites More sharing options...
SetBuilder Posted November 18, 2017 Report Share Posted November 18, 2017 On 11/16/2017 at 5:18 PM, Jronman said: This guy arrived today... and a couple cabinet pulls. Interestingly enough the cabinet pull actually came with long screws. So many times you buy cabinet pulls and the provided screws are too short. The GRS-16 has 4 threaded screw holes not sure why. Curious if they are for anything. Anyone know? Would seem like wasted work to drill and tap 4 screw holes if they are to be used for nothing. There was a thankyou note in the box for buying the GRS-16 and it had some interesting info. During the manufacturing process the squares are not color matched which means no two squares are the same color. As for the threaded holes, if you go through their website, I’m pretty sure they have rails that attach to make it a bigger square https://tsoproducts.com/tso-products-guide-rail-squares/angle-accessory-for-grs-16-family/ 1 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted November 18, 2017 Report Share Posted November 18, 2017 6 hours ago, rrich1 said: Thanks. Those do look small. I've got girl sized hands so I might still like them lol. Sent from my Pixel XL using Tapatalk haha you have Trump baby hands! They're nice but for whatever reason the rod is recessed into the handle a bit, not the best QC there. I don't love the chrome on the tip. Keep an eye on Amazon, I got mine for under $8 shipped. Quote Link to comment Share on other sites More sharing options...
BMack37 Posted November 18, 2017 Report Share Posted November 18, 2017 6 hours ago, JimboS1ice said: I have that incra ruler I love it Sent from my iPhone using Tapatalk I already used it once, game changer! Quote Link to comment Share on other sites More sharing options...
rrich1 Posted November 18, 2017 Report Share Posted November 18, 2017 haha you have Trump baby hands! They're nice but for whatever reason the rod is recessed into the handle a bit, not the best QC there. I don't love the chrome on the tip. Keep an eye on Amazon, I got mine for under $8 shipped.#maga! I'll check then out. Thanks. Sent from my Pixel XL using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted November 18, 2017 Report Share Posted November 18, 2017 From that smokin’ hot deal over at Tool Nut 5 Quote Link to comment Share on other sites More sharing options...
rrich1 Posted November 18, 2017 Report Share Posted November 18, 2017 Since I plan to resaw some 12" wide boards here soon I figured a double decker feather board was in need. I also got my vise screw from my father in law today! Woohoo! More pics and info in my building thread. Sent from my Pixel XL using Tapatalk 4 Quote Link to comment Share on other sites More sharing options...
mohawkdec Posted November 18, 2017 Report Share Posted November 18, 2017 On 11/9/2017 at 10:12 PM, NicholasShetley said: Here are a couple of my somewhat recent purchases. The new fuel ratchet is a massive improvement over the old one. I have no worries at all about breaking the head on this one under normal use. I also picked up the new Milwaukee generation two high torque impact and it is an absolute monster. When they say that it is a pneumatic replacement they are not kidding. I have done a few side by side tests and it is a tiny bit stronger than an Ingersoll Rand 2135timax at 175 psi. that fuel ratchet is on my list, nice Quote Link to comment Share on other sites More sharing options...
BMack37 Posted November 19, 2017 Report Share Posted November 19, 2017 Sort gift from Sears, had to throw $50 bucks in on this little guy. Only using it really to cut wood but a hell of a lot safer than clamping a jigsaw in a jawhorse! 2 Quote Link to comment Share on other sites More sharing options...
Stercorarius Posted November 19, 2017 Report Share Posted November 19, 2017 Also learned facom stuff is made in Taiwan, probably by toptul 2 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted November 19, 2017 Report Share Posted November 19, 2017 4 hours ago, BMack37 said: Sort gift from Sears, had to throw $50 bucks in on this little guy. Only using it really to cut wood but a hell of a lot safer than clamping a jigsaw in a jawhorse! Ha! I used to have that bandsaw several years ago! Great little saw! 1 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted November 19, 2017 Report Share Posted November 19, 2017 7 hours ago, ChrisK said: Ha! I used to have that bandsaw several years ago! Great little saw! I was a little surprised by how nice it seemed out of the box. I added a washer to the table leveling hardware and that's it. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted November 19, 2017 Report Share Posted November 19, 2017 Yeah I had mine for a couple of years and it was a great little saw. No complaints. 1 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted November 19, 2017 Report Share Posted November 19, 2017 Mag switch, some awesome Fastbacks and shockwave red helix bits... 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted November 19, 2017 Report Share Posted November 19, 2017 This guy arrived the other day. Seems very nice. 100% metal construction far as I can tell. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.